Microcosmic mechanism of material softening and fracture in primary shear zone during high speed machining of hardened steel
Source abstract
Abstract
The metallurgical observations of microstructure and fracture characteristics of the adiabatic shear bands, within the primary shear zones of the serrated chips produced during high speed machining 30CrNi3MoV hardened high strength steel, have been performed using optical microscope, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The microstructure observations showed that the material softening occurred in the primary shear zones during high speed machining. A microcosmic model of microstructure development and rotational dynamic recrystallisation in the primary shear zone during high speed machining high strength steel was suggested by analysis of material softening mechanism. The fracture observations showed that adiabatic shear fracture was the primary reason of serrated chip formation during high speed machining. A microcosmic fracture model during adiabatic shear was proposed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced machining processes and optimization · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Dalian University of Technology, Liaoning 116024, China
School of Mechanical Engineering, Tianjin Key Laboratory of High Speed Cutting and Precision Machining, Tianjin University of Technology and Education, Tianjin 300022, China
References (20)
Show source-provided references
1. Sutter G., and Molinari A. J. Manuf. Sci. Eng., 2005, 127, 245–250.10.1115/1.1863253 ↗
2. Sutter G., and Ranc N. Int. J. Mach. Tool Manuf., 2007, 47, 1507–1517.10.1016/j.ijmachtools.2006.11.012 ↗
3. Farhat Z. N. Mater. Sci. Eng. A, 2003, A361, 100–110.10.1016/S0921-5093(03)00503-3 ↗
4. El-Wardany T. I., Kishawy H. A., and Elbestawi M. A. J. Manuf. Sci. Eng., 2000, 122, 620–631.10.1115/1.1286367 ↗
5. Bäker M., Rösler J., and Siemers C. J. Manuf. Sci. Eng., 2002, 124, 485–488.10.1115/1.1459469 ↗
6. Christian H., and Bob S. J. Mater. Process. Technol., 2007, 186, 66–76.
7. Molinari A., Musquar C., and Sutter G. Int. J. Plast., 2002, 18, 443–459.10.1016/S0749-6419(01)00003-1 ↗
8. Campbell C. E., Bendersky L. A., Boettinger W. J., and Ivester R. Mater. Sci. Eng. A, 2006, A430, 15–26.10.1016/j.msea.2006.04.122 ↗
9. Recht R. F. Trans. ASME. J. Appl. Mach., 1964, 31, 189–193.10.1115/1.3629585 ↗
10. Nakayama K., Arai M., and Kanda I. CIRP Ann., 1988, 37, 89–92.10.1016/S0007-8506(07)61592-3 ↗
11. Jackson M.J., Whitfield M. D., Morrell J. S., Ahmed W., and Davim J. P. Mater. Sci. Technol, 2008, 24, (12), 1452–1461.
12. Meyers M. A., Xu Y. B., Xuc Q., Perez-Prado M. T., and McNelley T. R. Acta Mater., 2003, 51, 1307–1325.10.1016/S1359-6454(02)00526-8 ↗
13. Xu Y. B., Zhong W. L., Chen Y. J., Shen L. T., Liu Q., and Bai Y. L. Mater. Sci. Eng. A, 2001, A299, 287–295.10.1016/S0921-5093(00)01412-X ↗
14. Duan C. Z., and Wang M. J. J. Mater. Sci. Technol., 2004, 20, (6), 775–778.
15. Cho K. M., Lee S., Nutt S. R., and Duffy J. Acta Metall. Mater., 1993, 41, (3), 923–932.10.1016/0956-7151(93)90026-O ↗
16. Meyers M. A., and Pak H. R. Acta Metall, 1986, 34, 2493–2499.10.1016/0001-6160(86)90152-5 ↗
17. Derby B. Acta Metall. Mater., 1991, 39, 955–962.10.1016/0956-7151(91)90295-C ↗
18. Cho K. M., Chi Y. C., and Duffy J. Metall Trans. A, 1990, 2IA, 1161–1175.10.1007/BF02656536 ↗
19. Cowei J. G., Azrin M., and Olson G. B. Metall Trans. A, 1989, 20A, 143–153.10.1007/BF02647501 ↗
20. Rogers H. C. Annu. Rev. Mater. Sci., 1979, 9. 283–311.10.1146/annurev.ms.09.080179.001435 ↗