journal article·2015-09

Microstructure and mechanical properties of Fe–7Al based lightweight steel containing carbon

S. Khaple, R. G. Baligidad, V. V. Satya Prasad, D. V. V. Satyanarayana

Materials Science and Technology· Volume 31· Issue 12
Publisher page

Abstract

The effect of carbon on the microstructure and mechanical properties of lightweight steel based on Fe–7 wt-Al produced by air induction melting with flux cover is investigated. The ingots were hot worked to plates and were characterised. Steel containing 0.02 wt-C exhibited a single phase microstructure Fe–Al(α), whereas steel containing 0.5 and 1.0 wt- carbon exhibited a two-phase microstructure containing significant amounts of Fe3AlC0.5 precipitates in Fe–Al(α) matrix. Microhardness of the matrix decreases with increasing carbon content due to depletion of aluminium from the matrix to form Fe3AlC0.5 carbides. The bulk hardness, room temperature strength increases and tensile elongation decreases with increasing carbon content. However, at 873 K the improvement in strength as well as creep properties with increasing carbon content is marginal.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Defence Metallurgical Research laboratory Kanchanbagh, Hyderabad– 500058, India

References (41)

Show source-provided references
1. 10.1557/JMR.1991.177910.1557/JMR.1991.1779 ↗
2. 10.1016/S0921-5093(98)00909-510.1016/S0921-5093(98)00909-5 ↗
3. Mendiratta MG, Ehlers SK, Dimiduk DM, Kerr WR, Mazdiyasni S and Lipsitt HA: in ‘High temperature ordered intermetallic alloys II’, (ed. Stoloff N S, Koch C C, Lie C T and Izumi O), Vol. 81, 393–404; 1987, Pittsburgh, PA, MRS.10.1557/PROC-81-393 ↗
4. Sikka VK · 1993 · 971
5. 10.1007/978-1-4613-1215-4_910.1007/978-1-4613-1215-4_9 ↗
6. Vedula K: in ‘Intermetallic compounds: principles and practice’, (ed. Westbrook J H and Fleischer R L), Vol. 2, 199; 1994, Chichester, Wiley.
7. Sauthoff G: in ‘Materials science technology’, (ed. Cahn R W, Haasen P and Kramer E J), Vol. 8, 643; 1996, Weinheim, VCH.
8. 10.1016/S0966-9795(97)00045-910.1016/S0966-9795(97)00045-9 ↗
9. 10.1016/S0966-9795(98)00028-410.1016/S0966-9795(98)00028-4 ↗
10. 10.1016/S0921-5093(98)00909-510.1016/S0921-5093(98)00909-5 ↗
11. Baligidad RG · Trans. Indian Inst. Met. · 2007 · 60 · 1
12. 10.1007/s12666-008-0018-110.1007/s12666-008-0018-1 ↗
13. 10.1179/174328407X15838910.1179/174328407X158389 ↗
14. 10.1016/0956-716X(92)90110-Z10.1016/0956-716X(92)90110-Z ↗
15. 10.2355/isijinternational.50.148310.2355/isijinternational.50.1483 ↗
16. 10.1016/S1359-6454(03)00089-210.1016/S1359-6454(03)00089-2 ↗
17. 10.1007/BF0264592910.1007/BF02645929 ↗
18. Perlade A and Maugis P: ‘Development of new lightweight high strength steels’, Discussion Meeting on ‘The development of innovative iron aluminium alloys’, Toulouse, France, May 2005, Arcelor Research, Automotive Products Research Center.
19. 10.1016/j.scriptamat.2012.10.00410.1016/j.scriptamat.2012.10.004 ↗
20. 10.1051/metal:200011010.1051/metal:2000110 ↗
21. 10.1002/srin.20060644010.1002/srin.200606440 ↗
22. 10.1016/j.scriptamat.2012.07.03710.1016/j.scriptamat.2012.07.037 ↗
23. 10.1023/B:JMSC.0000033399.47370.4f10.1023/B:JMSC.0000033399.47370.4f ↗
24. 10.1016/j.msea.2006.02.03110.1016/j.msea.2006.02.031 ↗
25. 10.1016/j.intermet.2004.05.01010.1016/j.intermet.2004.05.010 ↗
26. 10.1016/S0921-5093(99)00726-110.1016/S0921-5093(99)00726-1 ↗
27. Khaple S, Baligidad RG, Bapuji S, Chandrashekar M, Satish Y: ‘Effect of alloying addition on the microstructure and mechanical properties of electroslag remelted Fe3Al alloy’, TR 410, 2006, DMRL, Hyderabad, India.
28. Baligidad RG · Met. Mater. Process. · 2007 · 19 · 55
29. 10.1016/j.intermet.2005.01.01310.1016/j.intermet.2005.01.013 ↗
30. 10.1016/0966-9795(95)00003-H10.1016/0966-9795(95)00003-H ↗
31. Palm M and Zum K: ‘System Fe-Al-C’, PhD thesis, Universitat Dortmund, Dortmund, Germany, 1990.
32. Gaydosh DJ · Metall. Trans. A · 1889 · 20 · 170110.1007/BF02663202 ↗
33. 10.1016/0956-7151(90)90209-Y10.1016/0956-7151(90)90209-Y ↗
34. Frattini R, Schiffini L, Scipione G, Bonnetti E and Enzo S: ‘Processing, properties and application of iron aluminide’, (ed. Schneibel J H and Crimp M A), 79; 1994, Warrendale, PA, TMS.
35. Powder diffraction file, Vol. 29–30, 19, International Center for Diffraction Data, Greenville, PA, USA, 1987.
36. Ashby MF · 1984 · 3
37. 10.1016/0001-6160(87)90083-610.1016/0001-6160(87)90083-6 ↗
38. 10.1016/0001-6160(83)90059-710.1016/0001-6160(83)90059-7 ↗
39. 10.1016/j.proeng.2013.03.32710.1016/j.proeng.2013.03.327 ↗
40. 10.3184/096034007X21763210.3184/096034007X217632 ↗
41. 10.1179/1878641314Y.000000002210.1179/1878641314Y.0000000022 ↗