journal article·2010-12

Microstructure, hardness and residual stress distribution of dissimilar metal electron beam welds: Maraging steel and high strength low alloy steel

V. Venkateswara Rao, G. Madhusudhan Reddy, A. V. Sitarama Raju

Materials Science and Technology· Volume 26· Issue 12
Publisher page

Abstract

The present investigation reports on a study that has been taken up to develop an understanding of the electron beam welding characteristics of similar and dissimilar combination of maraging steel and high strength low alloy steel, which are in the hardened condition, i.e. maraging steel, in a solution that was in treated and aged condition, whereas high strength low alloy steel in a quenched and tempered condition before welding. The joint characterisation studies include microstructural examination, microhardness survey across the weldment and measurement of residual stresses. Maraging steel weld metal is under compressive stress rather than tensile stress as observed in low alloy steel welds because the martensite transformation occurs at a relatively low temperature. It has been observed that, in dissimilar metal welds, tensile stress is observed at the fusion boundary of low alloy steel and weld metal, whereas compressive stress is obtained at the location between weld and maraging steel fusion boundary. Dissimilar weldment contains a soft region beside the interface on maraging steel side because of the diffusion of manganese from low alloy steel towards maraging steel. The observed residual stresses, hardness distribution across the similar and dissimilar metal welds are correlated with the observed microstructures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Advanced Systems LaboratoryHyderabad 500 058, India

Defence Metallurgical Research LaboratoryHyderabad 500058, India

Department of Mechanical EngineeringJNTU, Hyderabad 500058, India

References (26)

Show source-provided references
1. Masubuchi K. ‘Analysis of welded structures’: 1980, Oxford, of welded structures': 1980, Oxford,Pergamon Press.
2. Non-destructive measurement and analysis of residual stress in and around welds — a state of the art survey’, IIW document no. IISMW- 936-87, WRC Bulletin 383; 1993, New York, Welding Research Council.
3. 10.1007/s11661-008-9616-010.1007/s11661-008-9616-0 ↗
4. 10.1179/174328407X21311610.1179/174328407X213116 ↗
5. Masubuchi K. ‘Analysis of welded structures, residual stresses, distortion and their consequences’: 1980, New York, Pergamon Press.
6. Adamas C. M. · Weld J. · 1964 · 43 · 193s
7. 10.1016/0956-7151(94)90259-310.1016/0956-7151(94)90259-3 ↗
8. Taljat B., Radhakrishnaan B., and Zakharia T.: Mater. Sci. Eng. A, 1998, A246,45–54.10.1016/S0921-5093(97)00729-6 ↗
9. 10.1016/0045-7949(93)90358-K10.1016/0045-7949(93)90358-K ↗
10. 10.1016/j.ijfatigue.2003.08.02010.1016/j.ijfatigue.2003.08.020 ↗
11. Mochizuki M.: Nucl. Eng. Design, 237,107–123.10.1016/j.nucengdes.2006.05.006 ↗
12. 10.1179/13621710010153839910.1179/136217100101538399 ↗
13. 10.1007/BF0264606110.1007/BF02646061 ↗
14. Canonico D. A. · Weld. J. · 1964 · 43 · 433s
15. Adamas C. M. · Weld · 1964 · 43 · 193s
16. in ‘Metals handbook’, 10th edn,Vol. 1, 793-800; 1990, Materials Park, OH, ASM International.
17. Rohrbach K., Schmidt M. ‘ASM metals handbook’, 793-800; 1991, Materials Park, OH, ASM International.
18. in ‘Welding hand book’, 7th edn,Vol. 4, 46-195; 1982, Miami, FL, American Welding Society. 1982.
19. 10.1080/0950711870944935010.1080/09507118709449350 ↗
20. Cavles J. H., Blandfond M., Giamei A. F., Bruskotter M. J.: in ‘Modeling of casting, welding and advanced solidification pro-cesses VII’, (ed.Crossa M., and Camphell Y.); 1995, Warrendale, PA, TMS.154–162.
21. Noyan I. C., and Cohen J. B. ‘Residual stress measurement by diffraction and interpretation’; 1987, New York, Springer-Verlag.
22. Kenyon N. · Weld. J. · 1968 · 47 · 193s
23. 10.1108/0961553011038157510.1108/09615530110381575 ↗
24. Lang F. H., and Kenyon N. ‘Welding of maraging steel’, WRC Bulletin 159; 1971, New York, Welding Research Council, Engineering Foundation.
25. Baily N., and Roberts C.: Weld 1, 1978, 54,15–28.
26. Kenyon N. · Weld. J · 1969 · 48 · 05s