journal article·2008-06

Characterisation of dynamic recovery during hot deformation of spray formed Al–Li alloy (UL40) using processing map approach

G. Jagan Reddy, N. Srinivasan, A. A. Gokhale, B. P. Kashyap

Materials Science and Technology· Volume 24· Issue 6
Publisher page

Abstract

Processing maps, also known as power dissipation maps, for spray formed Al–Li alloy (UL40), encompassing a wide range of hot working temperature (375–575°C) and strain rate (3 × 10−4–101 s−1) have been developed. The constant true strain rate compression tests were carried out under isothermal conditions to generate the stress–strain data required for computing the efficiency of power dissipation η. The maps exhibit three distinct regimes. The two high efficiency (>55%) regimes occur at the low strain rates (<10−3 s&minus1) and at the high strain rates (>1 s−1), and the other with moderate efficiency values (20–23%) occurs at the intermediate strain rate (10−1 s−1). The latter one has been interpreted to be associated with dynamic recovery (DRV) process while the other two regimes have been found to be associated with cracking processes. The DRV regime in the map has been characterised in terms of stress–strain response, microstructure and tensile ductility. The kinetic rate analysis carried out in the DRV regime suggested that the thermally activated cross-slip is the rate controlling mechanism for the DRV process. The effect of Li addition on the optimum deformation condition of DRV in Al has also been discussed qualitatively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Venkateshwara Rao K. T. · Mater. Re · 1992 · 153
2. 10.1016/j.jmatprotec.2004.01.06210.1016/j.jmatprotec.2004.01.062 ↗
3. 10.1179/mst.1987.3.2.8110.1179/mst.1987.3.2.81 ↗
4. Starke E. A. · J. Metal · 1981 · 33 · 24
5. Prangnell P. B., Hulley S. I., and Palmer I. G.: Proc. 4th Int. Conf. on ‘Al alloys’, Vol. II, 206; 1994, Atlanta, GA, Georgia Institute of Technology.
6. Owen A. J. · Aerospace · 1993 · 12 · 24
7. 10.1016/S1359-6462(97)00038-910.1016/S1359-6462(97)00038-9 ↗
8. Gregson P. J., and Flower H. M.: Acta Matall. 1985, 33, 527–537.10.1016/0001-6160(85)90095-1 ↗
9. 10.1016/1044-5803(92)90046-K10.1016/1044-5803(92)90046-K ↗
10. Jensrud O.: Proc. 3rd Int. Conf. on ‘Al-Li alloys’, University of Oxford, UK, July 1985, The Institute of Metals, 411.
11. Nikura M., Takahashi K., and Ouchi C.: Proc. 3rd Int. Conf. on ‘Al-Li alloys’, University of Oxford, UK, July 1985, The Institute of Metals, 213.
12. 10.1016/S0921-5093(00)00728-010.1016/S0921-5093(00)00728-0 ↗
13. 10.1016/0956-716X(94)90567-310.1016/0956-716X(94)90567-3 ↗
14. Kaibyshev R., Shipilova K., Musin F., and Motohashi Y.: Mater. Sci Eng. A, 2005, A396,341–351.10.1016/j.msea.2005.01.053 ↗
15. 10.1016/S0921-5093(97)00687-410.1016/S0921-5093(97)00687-4 ↗
16. Kumar S., and Pink E.: Acta Mater. 1997, 45, 5295–5301.10.1016/S1359-6454(97)00149-3 ↗
17. Behnood N., and Evans J. T.: Acta Metall. 1989, 37, 687–695.10.1016/0001-6160(89)90252-6 ↗
18. 10.1016/S1359-6462(97)00571-X10.1016/S1359-6462(97)00571-X ↗
19. 10.1179/imr.1994.39.6.21710.1179/imr.1994.39.6.217 ↗
20. 10.1016/S0921-5093(99)00743-110.1016/S0921-5093(99)00743-1 ↗
21. 10.1016/S0921-5093(98)00790-410.1016/S0921-5093(98)00790-4 ↗
22. McQueen H. J., Jain V., Hopkins A., Konopleva E. V., and Sakaris P.: Proc. 4th Int. Conf. on ‘Aluminium alloys’, Vol. II, 250; 1994, Atlanta, GA, Georgia Institute of Technology.
23. Y. V. R. K. Prasad and S. Sasidhara (eds.): ‘Hot working guide - a compendium of processing map’; 1997, Materials Park, OH, ASM International.
24. 10.1007/BF0266500010.1007/BF02665000 ↗
25. 10.1007/BF0267076310.1007/BF02670763 ↗
26. Menon S. S., and Rack H. J.: Proc. 4th Int. Conf. on ‘Al alloys’, Vol. II, 230; 1994, Atlanta, GA, Georgia Institute of Technology.
27. Gokhale A. A., Singh V., Prasad N. E., Chakravorthy C. R., and Prasad Y. V. R. K.: Proc. 4th Int. Cong. on ‘Al alloys’, Vol. II, 242; 1994, Atlanta, GA, Georgia Institute of Technology.
28. 10.1007/BF0267404110.1007/BF02674041 ↗
29. 10.1007/BF0264349010.1007/BF02643490 ↗
30. 10.1179/02670830422501667110.1179/026708304225016671 ↗
31. 10.1016/j.jmatprotec.2002.01.00110.1016/j.jmatprotec.2002.01.001 ↗
32. Semiatin S. L., and Jonas J. J. ‘Formability and workability of metals’, (ed.Gegel H.), 43-119; 1984, Metals Park, OH, ASM.
33. Wadsworth J. · Scr. Mater · 1983 · 17 · 347
34. 10.1063/1.171596010.1063/1.1715960 ↗
35. 10.1016/S0924-0136(97)00219-710.1016/S0924-0136(97)00219-7 ↗
36. Williams D. B., and Edington J. W.: Met. Sci 1, 1975,9,529–532.10.1179/030634575790445143 ↗
37. Kocks U. F. · Mater. Sc · 1975 · 110
38. Dieter G. E. ‘Mechanical metallurgy’, 310-313; 1988, London, McGraw-Hill.
39. Roberts W.: ASM Materials Science Seminar on ‘Deformation, processing and structure’,(ed.Krauss G.), 109; 1992, St Louis, MO, Colorado School of Mines.
40. 10.1007/s11661-006-0239-z10.1007/s11661-006-0239-z ↗
41. 10.1179/09506609079032393910.1179/095066090790323939 ↗