journal article·2004-05

Mechanical and corrosion properties of P/M-HIP super duplex stainless steel after different industrial heat treatments as used for large components

O. Smuk, H. Hänninen, J. Liimatainen

Materials Science and Technology· Volume 20· Issue 5
Publisher page

Abstract

Mechanical tensile and impact toughness tests and critical pitting corrosion temperature (CPT) tests were performed on samples of Duplok 27, a P/M-HIP duplex stainless steel containing copper, after heat treatments simulating industrial heat treatments of large components. It was shown that copper alloying has positive effects on mechanical tensile properties leading to hardening and more uniform deformation. No negative effects of copper alloying on corrosion resistance properties were found. A drastic drop in impact toughness values and CPT of samples cooled at controlled cooling rates is explained by the precipitation of intermetallic secondary phases or their precursors. Lower CPT of a NG-GTAW (narrow gap gas tungsten arc welding) welded joint is explained by the lower level of alloying than that of the base material. The high temperature region of precipitation of intermetallic secondary phases is shifted towards higher temperatures than assumed for Duplok 27 P/M-HIP duplex stainless steel.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (2)

Show source-provided references
1. 10.1179/mst.1992.8.8.68510.1179/mst.1992.8.8.685 ↗
2. I. LEMAY and L. MCDONALD SCHETKY: ‘Copper in iron and steel’, 423; 1982, New York, John Wiley and Sons.