journal article·2017-12

Analysis of properties for in situ Al 2 O 3 p/A356 composites synthesised from the Al-SiO 2 system

Mingai Meng, Gang Chen, Zhenya Zhang, Yutao Zhao

Materials Science and Technology· Volume 33· Issue 18
Publisher page

Abstract

In situ Al 2 O 3 p/A356 composites with different particle volume fractions were successfully synthesised from the Al-SiO 2 system by a direct-melt reaction. γ-Al 2 O 3 was first produced during the reaction between Al and SiO 2 , and the phase transformation from γ-Al 2 O 3 to α-Al 2 O 3 then occurred at higher temperatures (1050°C), resulting in a volume contraction. The α-Al 2 O 3 p/A356 composite exhibited a reduction in dendrite cell size that was 1.5–2 greater than for the matrix alloy cast using the same conditions. A 10% particle volume fraction yielded optimum mechanical properties, with values for the yield stress, tensile strength, elongation and microhardness of 132 MPa, 268 MPa, 5.1% and 107.2 HV, respectively. These corresponded to increases 50, 31, 19 and 47%, respectively, when compared to the matrix. This paper is part of a thematic issue on Light Alloys.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Jiangsu University, Zhenjiang, China

Funding

National Natural Science Foundation of China · Jiangsu Province Science and Technology Support Project · Natural Science Foundation of Jiangsu Province

References (34)

Show source-provided references
1. Emamy M · Mater Sci Eng A · 2014 · 45 · 190
2. 10.1016/j.matdes.2015.10.06310.1016/j.matdes.2015.10.063 ↗
3. 10.1016/j.jallcom.2016.01.15210.1016/j.jallcom.2016.01.152 ↗
4. 10.1016/j.jallcom.2016.02.24310.1016/j.jallcom.2016.02.243 ↗
5. 10.1016/j.matpr.2015.07.28210.1016/j.matpr.2015.07.282 ↗
6. 10.1016/j.msea.2016.04.09710.1016/j.msea.2016.04.097 ↗
7. 10.1016/j.compositesb.2016.02.01910.1016/j.compositesb.2016.02.019 ↗
8. 10.1016/j.jallcom.2014.01.11710.1016/j.jallcom.2014.01.117 ↗
9. 10.1016/S1003-6326(09)60429-510.1016/S1003-6326(09)60429-5 ↗
10. 10.1016/j.actamat.2011.11.04410.1016/j.actamat.2011.11.044 ↗
11. 10.1016/j.msea.2005.12.03210.1016/j.msea.2005.12.032 ↗
12. 10.1016/j.ceramint.2015.09.04910.1016/j.ceramint.2015.09.049 ↗
13. 10.1016/j.jallcom.2015.05.15310.1016/j.jallcom.2015.05.153 ↗
14. 10.1016/j.matchemphys.2004.09.01410.1016/j.matchemphys.2004.09.014 ↗
15. 10.1016/j.apt.2010.07.01010.1016/j.apt.2010.07.010 ↗
16. 10.1016/j.jallcom.2015.03.15610.1016/j.jallcom.2015.03.156 ↗
17. 10.1016/j.matdes.2014.06.02310.1016/j.matdes.2014.06.023 ↗
18. Pal B · J Ind Eng Chem · 2014 · 25 · 99
19. 10.1016/j.surfcoat.2014.09.01210.1016/j.surfcoat.2014.09.012 ↗
20. 10.1016/j.matdes.2016.03.06410.1016/j.matdes.2016.03.064 ↗
21. 10.1016/j.matlet.2015.01.13210.1016/j.matlet.2015.01.132 ↗
22. 10.1016/j.msea.2011.09.04210.1016/j.msea.2011.09.042 ↗
23. 10.1016/j.msea.2015.01.02910.1016/j.msea.2015.01.029 ↗
24. 10.1016/j.matchemphys.2014.02.02010.1016/j.matchemphys.2014.02.020 ↗
25. 10.1016/j.matlet.2012.09.02810.1016/j.matlet.2012.09.028 ↗
26. Li QL · J Alloy Compd · 2015 · 627 · 52
27. 10.1016/j.ijrmhm.2011.04.00110.1016/j.ijrmhm.2011.04.001 ↗
28. 10.1016/j.matlet.2016.01.12110.1016/j.matlet.2016.01.121 ↗
29. 10.1016/j.msea.2011.09.00610.1016/j.msea.2011.09.006 ↗
30. 10.1016/S1875-5372(10)60011-210.1016/S1875-5372(10)60011-2 ↗
31. 10.1016/j.surfcoat.2013.03.04310.1016/j.surfcoat.2013.03.043 ↗
32. 10.1007/s11661-014-2358-210.1007/s11661-014-2358-2 ↗
33. 10.1016/j.jallcom.2015.08.16210.1016/j.jallcom.2015.08.162 ↗
34. 10.1016/j.matchar.2015.12.01210.1016/j.matchar.2015.12.012 ↗