Synergism between effects of velocity, temperature, and alloy corrosion resistance in laboratory simulated fluidised bed environments
Source abstract
Abstract
In studies of the erosion of alloys at elevated temperature, the combined effects of velocity, temperature, and alloy corrosion resistance are not well understood. Wide variations in the effects of velocity have been observed for alloys of different corrosion resistance in various erosion–corrosion environments. There is also some evidence that temperature can affect this relationship. The object of the present work was to undertake a systematic study of the effects of erodent velocity for two alloys, mild steel and 310 stainless steel, at elevated temperatures (300 and 600°C). The velocity was controlled at values between 1·5 and 4·5 m S −l . Weight change data and analytical scanning electron microscopy were used to characterise the degradation in the various conditions. The results showed that the ranking order of the erosion–corrosion rates of the two different alloys varied as a function of velocity. The velocity at which the ranking of the two alloys reversed increased with increasing temperature. The reasons for such behaviour are discussed in terms of the dependence of the erosion–corrosion rate on the velocity in the various erosion–corrosion regimes. MST/3188
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Erosion and Abrasive Machining · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. SETHI V. K. and COREY R. G.: in Proc. 7th Int. Conf. on ‘Erosion by liquid and solid impact’. paper 73; 1987 Cambridge Cavendish Laboratory (University of Cambridge).
2. 10.5006/1.358510510.5006/1.3585105 ↗
3. LEVY A. V. BUQUIAN WANG MAN YONG FA and JEE N.: in Proc. 7th Int. Conf. on ‘Erosion by liquid and solid impact’ paper 72; 1987 Cambridge Cavendish Laboratory (University of Cambridge).
4. NINHAM A. J. ENTWISLE M. J. HUTCHINGS I. M. and LITTLE J. A.: in Proc. 10th Int. Conf. on ‘Fluidized bed combustors’ (ed. Manaker A. M. ) 583-590; 1989 New York ASME.
5. STACK M. M. STOTT F. H. and WOOD G. C.: Mater. Sci. 7'echnol. 1991 7 (12) 1128-1137.10.1179/026708391790182971 ↗
6. ROGERS P. M. HUTCHINGS I. M. and LITTLE J. A.: Wear 1992 154 269-285.10.1016/0043-1648(92)90159-6 ↗
7. 10.1179/sur.1992.8.1.4710.1179/sur.1992.8.1.47 ↗
8. SETHI V. K. and WRIGHT t. G.: in ‘Corrosion and particle erosion in high temperatures’ (ed. Srinivasan V. and Vedula K.) 245-263; 1989 Warrendale PA Mineral Metals and Materials Society.
9. 10.1016/0043-1648(94)06536-510.1016/0043-1648(94)06536-5 ↗
10. RISHEL D. M., , PETTIT F. S., , and BIRKS N.: In Proc. 4th Berkeley Conf. on ‘Corrosion—erosion-wear of materials at elevated temperatures’, (ed. Levy A. V., ), paper 16; 1990, Houston, TX, NACE.
11. STEPHENSON D. J. and NICHOLLS J. R.: COrrOS. SCi. 1993. 5-8 (35) 1015-1026.10.1016/0010-938X(93)90320-G ↗
12. SUNDARARAJAN G.: Wear 1991 149 129-153.10.1016/0043-1648(91)90369-6 ↗
13. STACK M. M., , STOTT F.II, , and WOOD G. C.: J. Phys. IV, 1993, 3, 687–694.
14. STOTT F. H. GREEN S. W. and WOOD G. C.: J. Mater. Sci. Eng. 1989 A121 (2) 611-617.10.1016/0921-5093(89)90822-8 ↗