journal article·2010-07

Interaction of 308 stainless steel insert with A319 aluminium casting alloy

E. M. Khoonsari, F. Jalilian, F. Paray, D. Emadi, R. A. L. Drew

Materials Science and Technology· Volume 26· Issue 7
Publisher page

Abstract

In the metallurgical connection of aluminium alloys to steels, it is important to restrain the formation and growth of hard and brittle intermetallic phases at the aluminium/steel interface to enhance the mechanical behaviour of the joint. The influence of two coating materials, electroless plated copper (for 20 and 40 min) and galvanised zinc (at 480 and 550°C), on the quality of the interface between 308 stainless steel and A319 aluminium matrix was investigated. Copper led to the formation of a compact, solid inhibition layer against the elemental diffusion at the aluminium–steel contact temperature, while zinc resulted in the formation of a composite intermetallic layer which was open in structure. Comparing all interfaces formed between the insert and Al matrix, the 40 min Cu coated steel revealed the lowest values in terms of the thickness and microhardness after immersion into the molten aluminium.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials EngineeringMcGill University, Montreal, QC, Canada

Materials EngineeringMcGill University, Montreal, QC, Canada;, Email: florence.paray@mcgill.ca

CanmetENERGYNatural Resources Canada, Ottawa, ON, Canada

Faculty of Engineering and Computer ScienceConcordia University, Montreal, QC, Canada

References (19)

Show source-provided references
1. Brucker J.: Weld 1, 2005,84, (6), 38.10.1109/MC.2005.221 ↗
2. Jorstad J. L., Morley R. A., Overbagh W. H., and Steele G. W.: US patent, 5333668, 1994.
3. Mathieu A., Mattel S., Deschamps A., Martin B., and Grevey D.: NDT E Int. 2006, 39, 272–276.10.1016/j.ndteint.2005.08.005 ↗
4. Mathieu A., Shabadi R., Deschamps A., Suery M., Mattel S.
5. 10.1016/j.optlastec.2005.08.01410.1016/j.optlastec.2005.08.014 ↗
6. Akdeniz M. V., and Mekhrabov A. O.: Acta Mater. 1998, 46, (4), 1185–1192.10.1016/S1359-6454(97)00318-2 ↗
7. Fragner W. · Mater. Sci Forum · 2006 · 519
8. ‘ASM handbook’, Vol. 3, 294-295; 1992, Metals Park, OH, ASM International.
9. Shih T.S., and Tu S.H.: Mater. Sci Eng. A, 2007, A454—A455,349–356.10.1016/j.msea.2006.11.017 ↗
10. 10.1016/j.matlet.2005.08.01510.1016/j.matlet.2005.08.015 ↗
11. 10.1007/BF0115307610.1007/BF01153076 ↗
12. Kobayashi S., and Takou T.: Mater. Sci Eng. A, 2002, A338, 44.53.
13. Belov N. A., Eskin D. G., and Aksenov A. A. ‘Multi-component phase diagrams: applications for commercials aluminum alloys’, 1–100; 2005, Oxford, Elsevier Science.
14. Leon C. A. · 2000
15. Roulin M., Luster J. W., Karadenuz G., and Mortensen A.: Weld Res., 1999, 151S-155S.
16. Naoi D., and Kajihara M.: Mater. Sci. Eng. A, 2007, A459,375–382.10.1016/j.msea.2007.01.099 ↗
17. 10.1007/BF0267068710.1007/BF02670687 ↗
18. Warmuzek M. · Adv. Mater. Sci · 2003 · 4 · 81
19. Trutnev V. · Weld Prod · 1967 · 14 · 18