High strain rate shear deformation and fracture behaviour of biomedical titanium alloy
Source abstract
Abstract
The rate and temperature dependent shear deformation behaviour of biomedical titanium alloy (Ti–15Mo–5Zr–3Al) is investigated using a torsional split Hopkinson pressure bar at strain rates ranging from 1·2 × 103 to 2·8 × 103 s–1 and temperatures of –150, 25 and 300°C. It is found that both the strain rate and the temperature have a significant effect on the high strain rate shear properties and fracture characteristics of the alloy. As the strain rate is increased or the temperature is reduced, the flow stress, workhardening rate, strain rate and temperature sensitivity increase, but the activation volume and activation energy decrease. The fracture strain increases with both increasing strain rate and increasing temperature. The shear flow behaviour of the Ti–15Mo–5Zr–3Al specimens is accurately described by the Kobayashi–Dodd constitutive equation. Metallographic observations reveal that the failure of the present Ti–15Mo–5Zr–3Al alloy is dominated by intensive localised shearing. Moreover, the SEM fractographs show that the fracture surfaces are characterised by a dimple-like structure. The dimple density increases with an increasing strain rate or temperature. By contrast, the dimple size reduces at higher strain rates and temperatures and gives rise to a significant improvement in the fracture resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical EngineeringNational Cheng Kung University, Tainan 701, Taiwan;, Email: wslee@mail.ncku.edu.tw
Center for Micro/Nanoscience and TechnologyNational Cheng Kung University, Tainan 701, Taiwan
National Center for High-Performance ComputingHsin-Shi Tainan County 744, Taiwan
Department of Mechanical EngineeringNational Cheng Kung University, Tainan 701, Taiwan
References (34)
Show source-provided references
1. 10.1016/S0921-5093(03)00150-310.1016/S0921-5093(03)00150-3 ↗
2. 10.1016/0921-5093(96)10243-410.1016/0921-5093(96)10243-4 ↗
3. 10.1016/S0142-9612(99)00190-810.1016/S0142-9612(99)00190-8 ↗
4. Hartely K. A., Duffy J., and Hawley R. W. ‘The torsional Klosky (split Hopkinson) bar’, in ‘ASM metal handbook’, 9th edn,Vol. 8, 218-228; 1985, Materials Park, OH, ASM International.
5. 10.1016/j.msea.2004.04.03410.1016/j.msea.2004.04.034 ↗
6. 10.1016/S0921-5093(00)01412-X10.1016/S0921-5093(00)01412-X ↗
7. Lee W. S. · Ser. Mater · 2006 · 54 · 1463
8. Regazzoni G. · Metall · 1987 · 5
9. 10.1016/S0921-5093(00)02024-410.1016/S0921-5093(00)02024-4 ↗
10. Lin Y. · Metall. Trans. A · 1992 · 23 · 33510.1007/BF02660875 ↗
11. 10.1016/j.msea.2006.03.08710.1016/j.msea.2006.03.087 ↗
12. Zerilli F. J., and Armstrong R. W.: Acta Metall Mater. 1992, 40, 1803–1808.10.1016/0956-7151(92)90166-C ↗
13. 10.1016/j.matchemphys.2008.08.01610.1016/j.matchemphys.2008.08.016 ↗
14. 10.1007/s11661-004-0258-610.1007/s11661-004-0258-6 ↗
15. 10.1016/j.matlet.2005.01.01210.1016/j.matlet.2005.01.012 ↗
16. Aadharapurapu R. R., Jiang F., Vecchio K. S., and Gray G. T.: Acta Mater. 2006, 54, 4609–4620.10.1016/j.actamat.2006.05.047 ↗
17. 10.1007/s11661-005-0088-110.1007/s11661-005-0088-1 ↗
18. 10.1016/0921-5093(91)90774-H10.1016/0921-5093(91)90774-H ↗
19. 10.2320/jinstmet1952.53.11_109810.2320/jinstmet1952.53.11_1098 ↗
20. 10.1016/S0921-5093(97)00791-010.1016/S0921-5093(97)00791-0 ↗
21. 10.1016/0921-5093(96)10247-110.1016/0921-5093(96)10247-1 ↗
22. 10.1016/S0921-5093(97)00794-610.1016/S0921-5093(97)00794-6 ↗
23. 10.1016/S0142-9612(01)00337-410.1016/S0142-9612(01)00337-4 ↗
24. 10.1016/S0142-9612(99)00190-810.1016/S0142-9612(99)00190-8 ↗
25. 10.1007/s11661-008-9514-510.1007/s11661-008-9514-5 ↗
26. Ludwik P. ‘Elemente der technologischen Mechanik’, 32-37; 1909, Berlin Springer-Verlag.10.1007/978-3-662-40293-1 ↗
27. Follansbee P. S. · Inst. Phys. Conf. Ser · 1984 · 70 · 71
28. 10.1016/0921-5093(93)90427-G10.1016/0921-5093(93)90427-G ↗
29. 10.1179/02670830322500585410.1179/026708303225005854 ↗
30. Egg S. S., Sue Y. Q., and Hirsch P. B.: Mater. Sci Eng. A, 1995, A192-A193,45–52.
31. 10.1179/174328406X8611910.1179/174328406X86119 ↗
32. 10.1016/0025-5416(69)90026-310.1016/0025-5416(69)90026-3 ↗
33. Shi L., and Northwood D. O.: Acta Metall Mater. 1995, 43, 453–460.10.1016/0956-7151(94)00279-Q ↗
34. 10.1016/0734-743X(89)90027-410.1016/0734-743X(89)90027-4 ↗