Influence of tempering on microstructure and mechanical properties of Ti alloyed 13Cr supermartensitic stainless steel
Source abstract
Abstract
Tempering is the final heat treatment applied to martensitic steels. In conventional martensitic stainless steels or in the newly developed supermartensitic grades, the mechanical properties are strongly influenced by tempering. In the present work, several tempering treatments were performed in a Ti alloyed supermartensitic stainless steel. Tensile mechanical properties, hardness and impact toughness were measured and correlated to microstructural features. Microstructural analysis was conducted in a field emission gun scanning electron microscope and also by magnetic measurements. The ductility parameters continuously increased with tempering temperature, while yield and ultimate strength decreased. Secondary hardening and temper embrittlement were observed by hardness and low temperature impact tests respectively, while tensile tests were not sensitive to these phenomena.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal Fluminense, PGMEC, Rua Passo da Pátria, 156, Niterói CEP 24210-240, Brazil
Programa de Pós-graduação: em Ciência e Engenharia dos Materiais, PGMAT, Universidade Federal de Santa Catarina, Santa Catarina, Brazil
Departamento de Engenharia Metalúrgica e de Materiais, Universidade Federal do Ceará, Fortaleza, Brazil
References (18)
Show source-provided references
1. Kondo K, Ueda M, Ogawa K, Amaya H, Hirata H and Takabe H: ‘Alloy design of super 13 Cr martensitic stainless steel (development of super 13 Cr martensitic stainless steel for line pipe-1)’, in ‘Supermartensitic stainless steels ’99’, Belgium Welding Institute, Belgium, 1999, 11–18.
2. 10.1016/j.matdes.2008.04.02610.1016/j.matdes.2008.04.026 ↗
3. 10.1179/14784220322500143210.1179/147842203225001432 ↗
4. 10.1016/j.corsci.2011.07.04010.1016/j.corsci.2011.07.040 ↗
5. 10.1179/13621710422502182310.1179/136217104225021823 ↗
6. 10.1016/j.msea.2007.01.01610.1016/j.msea.2007.01.016 ↗
7. 10.1016/S1006-706X(10)60128-810.1016/S1006-706X(10)60128-8 ↗
8. Tavares SSM · J. Mater. Sci. · 2010 · 46 · 7737
9. Kimura M, Miyata Y, Yamane Y, Toyooka T and Nakano Y: ‘Corrosion resistance of high strength modified 13Cr steel’, Proc. Conf. NACE Corrosion 1997, NACE International, Houston, USA, Paper 22.10.5006/C1997-97022 ↗
10. Miyata Y · Kawasaki Steel Giho · 1997 · 29 · 90
11. ‘Standard test methods for notched bar impact testing of metallic materials’, ASTM E-23-12c, ASTM International, West Conshohocken, PA, USA, 2012.
12. ‘Standard test methods and definitions for mechanical testing of steel products’, ASTM E-370-09, ASTM International, West Conshohocken, PA, USA, 2009.
13. Cullity BD and Graham CD: ‘Introduction to magnetic materials’, 2nd edn; 2009, Picataway, Wiley-IEE Press.10.1002/9780470386323 ↗
14. Pickering FB: ‘Physical metallurgy and the design of steels’; 1978, London, Applied Science Publishers LTD.
15. Folckhard E: ‘Welding metallurgy of stainless steels’; 1999, New York, Springer-Verlag.
16. 10.1016/S1359-6462(01)01093-410.1016/S1359-6462(01)01093-4 ↗
17. 10.1016/j.matchar.2012.06.00410.1016/j.matchar.2012.06.004 ↗
18. Kimura M, Tamari T, Yamazaki Y, Sakata K and Mochizuki R: ‘Development of new 15Cr stainless steel OCTG with superior corrosion resistance’, Proc. Conf. NACE Corrosion 2005, NACE International, Houston, USA, Paper 05108.10.2118/98074-MS ↗