Changes of γ′ precipitate characteristics in damaged superalloy IN738LC during different stages of rejuvenation heat treatment cycles
Source abstract
Abstract
The present study investigates the evolution of γ′ precipitate microstructure in a creep damaged IN738LC superalloy during different stages of rejuvenation heat treatment cycles. Dissolution of coarsened γ′ precipitates in the creep damaged alloy occurred during different solution treatments. The precipitates that did not dissolve completely during solution treatment and those formed during subsequent cooling were considered to be as remnant and cooling precipitates respectively. It was found that higher solution treatment temperatures result in lower volume fraction of remnant precipitates and further formation of cooling precipitates. Slower cooling rates after solution treatment gave the chance for the existing γ′ particles to be coarser. Moreover, aging treatment increased the volume fraction of γ′ precipitates. Double solution treatment at 1190°C/4 h/furnace cooling+1120°C/4 h/air cooling followed by aging at 845°C/24 h/air cooling dissolved nearly all the coarsened precipitates and produced a new bimodal γ′ microstructure analogous with that of the original alloy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, Sharif University of Technology, PO Box 11155-9466, Azadi Avenue, Tehran, Iran
References (30)
Show source-provided references
1. Bryant DJ, McIntosh G:‘Superalloys 1996’(, Kissinger R D, et al.), 713–722; 1996, Warrendale,PA, The Minerals, Metals and Materials Society.10.7449/1996/Superalloys_1996_713_722 ↗
2. Hattori H, Takekawa M, Furrer DU, Noel RJ:‘Superalloys 1996’(, Kissinger R D, et al.), 705–711; 1996, Warrendale,PA, TMS.10.7449/1996/Superalloys_1996_705_711 ↗
3. Green KA, Lemsky JA, Gasior RM: ‘Superalloys 1996’, (R.D. Kissinger et al.), 697–703; 1996, Warrendale,PA, TMS.10.7449/1996/Superalloys_1996_697_703 ↗
4. 10.1361/10599490177034501510.1361/105994901770345015 ↗
5. 10.1007/s11665-007-9046-y10.1007/s11665-007-9046-y ↗
6. 10.1016/j.engfailanal.2008.07.00210.1016/j.engfailanal.2008.07.002 ↗
7. Davies PW · J. Inst. Met. · 1966 · 94 · 270
8. Davies PW · J. Inst. Met. · 1973 · 101 · 153
9. 10.1016/0001-6160(79)90057-910.1016/0001-6160(79)90057-9 ↗
10. 10.1007/BF0264730810.1007/BF02647308 ↗
11. 10.1016/j.msea.2006.09.06010.1016/j.msea.2006.09.060 ↗
12. 10.1515/HTMP.2007.26.2.15110.1515/HTMP.2007.26.2.151 ↗
13. 10.1115/1.145563810.1115/1.1455638 ↗
14. 10.1007/BF0264520810.1007/BF02645208 ↗
15. 10.1016/0025-5416(81)90186-510.1016/0025-5416(81)90186-5 ↗
16. McLean M, Tipler HR: Proc. 5th Int. Symp. on ‘Superalloys’,(ed. , Gell M, ed), 73–82; 1984, Warrendale,PA, Metals Society of AIME.10.7449/1984/Superalloys_1984_73_82 ↗
17. Koul AK, Immarigeon JP, Castillo R, Lowden P, Liburdi J:‘Superalloys 1988’(, Reichman S, et al.), 755–764; 1988, Champion,PA, The Metallurgical Society.10.7449/1988/Superalloys_1988_755_764 ↗
18. ‘AlloyIN-738 technical data’, 1–11; 1981; NewYork, The International Nickel Co. Inc.
19. 10.1016/0956-7151(90)90171-C10.1016/0956-7151(90)90171-C ↗
20. 10.1016/S1359-6454(02)00087-310.1016/S1359-6454(02)00087-3 ↗
21. 10.1016/0001-6160(80)90067-X10.1016/0001-6160(80)90067-X ↗
22. 10.1016/S0261-3069(03)00061-X10.1016/S0261-3069(03)00061-X ↗
23. 10.1023/A:100486971485410.1023/A:1004869714854 ↗
24. Balikci E · Z. Metallkd · 1999 · 90 · 132
25. 10.1007/s10853-005-3154-610.1007/s10853-005-3154-6 ↗
26. 10.1007/s10853-007-2342-y10.1007/s10853-007-2342-y ↗
27. 10.1016/j.msea.2007.10.00410.1016/j.msea.2007.10.004 ↗
28. 10.1007/s11661-997-0156-910.1007/s11661-997-0156-9 ↗
29. 10.1023/B:JMSC.0000048761.32712.eb10.1023/B:JMSC.0000048761.32712.eb ↗
30. 10.1016/j.jmatprotec.2005.04.02110.1016/j.jmatprotec.2005.04.021 ↗