journal article·2009-02

Multiscale microstructure modelling for nickel based superalloys

H. C. Basoalto, J. W. Brooks, I. Di Martino

Materials Science and Technology· Volume 25· Issue 2
Publisher page

Abstract

The present paper is concerned with the development of multiscale modelling approaches for predicting the microstructural evolution and high temperature deformation characteristics of superalloys with special attention to creep and hot forming behaviour. A microstructure informed deformation model is presented that links rearrangements at the microscale to the overall macroscopic response of the material through a damage mechanics approach and results are presented on the application of the model to CMSX4. The control of microstructure, during the manufacture of nickel based superalloy components, is key to the development of the mechanical properties required for the high temperature applications typical of these materials. Results from empirical methods and a new physics based approach for modelling recrystallisation in polycrystalline superalloys are presented for the prediction of the grain size distributions produced during hot forming operations in Inconel alloy 718. A global macroscale modelling approach based on Neural Networks has been developed which includes the effects of composition, heat treatment and processing route and the effectiveness of the model for both property prediction and interpolation is demonstrated.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Kachanov L. M. · Izv. Ak. Nauk SSSR OtdeL Tekh. Nauk · 1958 · 8 · 26
2. Rabotnov Y. N. ‘Proc. XII IUTAM Congress, Stanford, (ed.Hetenyi H., and Vincenti W. G.), 137; 1969, Berlin, Springer.
3. 10.1016/0025-5416(79)90157-510.1016/0025-5416(79)90157-5 ↗
4. Dyson B. F., and McLean M.: Acta Metall. 1983, 31, 1203.10.1016/0001-6160(83)90182-7 ↗
5. Rae C. M. F., Matan N., and Reed R. C.: Mater. ScL Eng. A, 2001, A300,125–134.10.1016/S0921-5093(00)01788-3 ↗
6. 10.1016/1359-6454(96)00011-010.1016/1359-6454(96)00011-0 ↗
7. Kamaraj M., Serin K., Kolbe M., and Eggeler G.: Mater. Sci. Eng. A, 2001, A319-321,796–799.10.1016/S0921-5093(01)00950-9 ↗
8. 10.1179/03063457679043141710.1179/030634576790431417 ↗
9. Dyson B. F.: Private communication, Department of Materials, Imperial College, London, UK, 1999.
10. 10.1016/0022-5096(77)90001-110.1016/0022-5096(77)90001-1 ↗
11. Ghosh R. N., Curtis R. V., and McLean M.: Acta Metall. 1990,38, 197710.1016/0956-7151(90)90309-5 ↗
12. Ion J. C., Barbosa A., Ashby M. F., Dyson B. F., and McLean M.: NPL Report DMAA115, National Physical Laboratory, 1986
13. 10.1016/0956-7151(92)90195-K10.1016/0956-7151(92)90195-K ↗
14. Basoalto H., Sondhi S., Dyson B. F., and McLean M.: in Warrendale, PA, TMS.
15. Basoalto H. C., and Dyson B. F.: to be published.
16. Ashby M. F., and Dyson B. F.: in ‘Advances in fracture research’, (ed.Valluri S. R. et al), Vol. 1, 3-30; 1984, Oxford, Pergamon Press.10.1016/B978-1-4832-8440-8.50017-X ↗
17. Dyson B. F.: in ‘Creep behaviour of advanced materials for the 21st century’, (ed.Mishra R. S.), 3-12; 2000, Warrendale, PA, TMS.
18. 10.2355/isijinternational.30.80210.2355/isijinternational.30.802 ↗
19. 10.1081/AMP-12001423410.1081/AMP-120014234 ↗
20. Volkl R., Glatzel U., and Feller-Kniepmeier M.: Acta Mater. 1998, 46, (12), 4395–4404.10.1016/S1359-6454(98)00085-8 ↗
21. Sondhi S. K., Dyson B. F., and McLean M.: Acta Mater. 2004, 52, (7), 1761–1772.10.1016/j.actamat.2003.12.017 ↗
22. Sieborger D., and Glatze U.: Acta Mater. 1999, 47, (2), 397–406.10.1016/S1359-6454(98)00378-4 ↗
23. Brooks J. W., Tin S., and Guest R. P.: Thermec 06 Int. Conf. on ‘Processing and manufacturing of advanced materials’, (ed.Chandra T. et al); 2006, Vancouver, Trans Tech Publications Ltd.
24. Evans R. W. ‘Proc. Conf. EUROMAT 89’; 1989, Oberursel, Deutsche Gesellshaft fur Metallkunde.
25. 10.1179/02670830077300262710.1179/026708300773002627 ↗
26. 10.1007/BF0267076710.1007/BF02670767 ↗
27. Zhao X. · Mater. Set TechnoL · 2004 · 20 · 1415
28. Guest R. P., and Tin S. ‘Superalloys 718 and derivatives’, 373; 2005, Warrendale, PA, TMS.10.7449/2005/Superalloys_2005_373_383 ↗
29. Guest R. P., and Tin S. ‘Superalloys 718 and derivatives’, 385; 2005, Warrendale, PA, TMS.10.7449/2005/Superalloys_2005_385_397 ↗
30. 10.1179/03063458279042721710.1179/030634582790427217 ↗
31. Guest R. P. · 2005
32. 10.1179/174328407X24401310.1179/174328407X244013 ↗
33. MacKay D. J. C.: Math. Model. Weld Phenom., 1997, (3), 359–389.
34. 10.1162/neco.1992.4.3.41510.1162/neco.1992.4.3.415 ↗
35. Bhadeshia H. K. D. H.: ISIJ Int., 1999, 39, 966–979. ‘Superalloys 2004’, (ed. Green K et aL), 897-906; 2004, F. Dyson and M. McLean: in Green et aL), 897-906; 2004,