Strength evaluation of α and β phases by nanoindentation in Ti–15Mo alloys with Fe and Al addition
Source abstract
Abstract
The strengths of the α precipitate and the β matrix were evaluated by nanohardness in the Ti−15Mo−1Fe and Ti−15Mo−3Al alloys and compared to those of the Ti−15Mo alloy. The α phases with similar size (a long axis of a few micrometres and a short axis of a few hundred nanometres), distribution and volume fraction were obtained in three alloys by adjusting the aging temperature. Analyses by SEM-EDS confirmed that Fe and Mo were enriched in the β phase and depleted in the α phase, while Al was enriched in the α phase and depleted in the β phase. Tensile tests were carried out, and the tensile strength was shown to be higher in the Ti−15Mo−1Fe and Ti−15Mo−3Al alloys than in the Ti−15Mo alloy. The nanohardness measurements indicated that the α phase was softer than the β phase in both Ti−15Mo−1Fe and Ti−15Mo alloys, while it was harder in the Ti−15Mo−3Al alloy. The increased tensile strength was mainly caused by the strength of the Fe enriched β phase in the Ti−15Mo−1Fe alloy and by the strength of the Al enriched α phase in the Ti−15Mo−3Al alloy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Institute for Materials Science Tsukuba 305-0047, Japan
Graduate School of Pure and Applied Sciences University of Tsukuba, Ibaraki 305-0047, Japan
References (26)
Show source-provided references
1. 10.1016/S0921-5093(97)00783-110.1016/S0921-5093(97)00783-1 ↗
2. 10.1361/105994905X7564610.1361/105994905X75646 ↗
3. 10.1520/STP18387S10.1520/STP18387S ↗
4. Bania PJ:in ‘Beta titanium alloys in 1990’s’(, Eylon D, et al.), 3–14; 1993, Warrendale, PA, TMS.
5. 10.1016/0921-5093(96)10233-110.1016/0921-5093(96)10233-1 ↗
6. Bowen AW · Scr. Mater. · 1971 · 5 · 709
7. 10.1007/BF0291342310.1007/BF02913423 ↗
8. 10.2355/isijinternational.31.78510.2355/isijinternational.31.785 ↗
9. 10.1007/BF0302821510.1007/BF03028215 ↗
10. 10.1016/j.jallcom.2007.03.07010.1016/j.jallcom.2007.03.070 ↗
11. 10.1007/BF0055493410.1007/BF00554934 ↗
12. 10.2320/jinstmet1952.40.3_21910.2320/jinstmet1952.40.3_219 ↗
13. Bowen AW: in ‘Titanium’80: science and technology’, (ed. , Kimura H, Izumi O), 1317–1326; 1980, Kyoto, TMS-AIME.
14. 10.2355/isijinternational.46.29210.2355/isijinternational.46.292 ↗
15. 10.1016/S1044-5803(02)00192-410.1016/S1044-5803(02)00192-4 ↗
16. 10.1016/S1369-7021(06)71495-X10.1016/S1369-7021(06)71495-X ↗
17. 10.1016/S1359-6462(01)01121-610.1016/S1359-6462(01)01121-6 ↗
18. 10.1557/JMR.2003.020110.1557/JMR.2003.0201 ↗
19. 10.1016/j.scriptamat.2003.08.02510.1016/j.scriptamat.2003.08.025 ↗
20. 10.1016/j.msea.2009.10.03310.1016/j.msea.2009.10.033 ↗
21. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
22. Ouchi C:in ‘Metallurgy and technology of practical titanium alloys’(, Fujishiro S, et al.), 37–44; 1994, Warrendale, PA, TMS.
23. Zhang XY, Zhao YQ, Bei CG: ‘Titanium alloys and its application’; 2005, Beijing, Chemical Industry Press.
24. 10.2320/matertrans.M201009310.2320/matertrans.M2010093 ↗
25. Maeda T, Flower HM:in ‘Ti-2007 science and technology’(, Niinomi M, et al.), 443–446; 2007, Sendai, The Japan Institute of Metals.
26. 10.1299/kikaia.59.256010.1299/kikaia.59.2560 ↗