journal article·2012-03

Study of deleterious phase precipitation under continuous cooling of superduplex stainless steel UNS S32750

J M Pardal, S S M Tavares, M P Cindra Fonseca, M R da Silva, M L R Ferreira

Materials Science and Technology· Volume 28· Issue 3
Publisher page

Abstract

Duplex and superduplex stainless steels have high strength and high corrosion resistance with a crescent demand in chemical and petrochemical industries. The best mechanical properties of this family of steels are obtained with approximately equal parts of ferrite and austenite. Grain refinement increases the toughness and resistance to environmentally assisted cracking. The precipitation of tertiary phases, such as σ, χ and secondary austenite, decreases the mechanical and corrosion resistance properties. The σ phase is the most dangerous of these deleterious phases and the one that precipitates in higher amounts. The majority of research works on deleterious phases in duplex and superduplex steels evaluate the kinetics of precipitation in specimens isothermally treated. In the present work, the precipitation of deleterious phases during continuous cooling from 1100°C was evaluated by optical and scanning electron microcopies, hardness measurements and electrochemical corrosion tests. Two superduplex stainless steel steels UNS S32750 with similar composition but quite different grain sizes were analysed in order to evaluate the influence of this microstructural feature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Programa de Pós-graduação em Engenharia Mecânica (PGMEC), Universidade Federal Fluminense, Rua Passo da Pátria, 156, Niterói CEP 24210-240, Brazil

Instituto de Ciências, Universidade Federal de Itajubá, Itajubá, Brazil

Programa de Engenharia Civil - Universidade Federal Fluminense, Rua Passo da Pátria, 156, Niterói, CEP 242 10-240, Brazil

References (19)

Show source-provided references
1. 10.1016/S0921-5093(03)00077-710.1016/S0921-5093(03)00077-7 ↗
2. Gunn RN: ‘Duplex stainless steels – microstructure, properties and applications’; 2003, Cambridge, Abington Publishing.
3. 10.1016/S0921-5093(02)00093-X10.1016/S0921-5093(02)00093-X ↗
4. 10.1016/S0010-938X(99)00009-810.1016/S0010-938X(99)00009-8 ↗
5. 10.1007/s11661-000-0050-110.1007/s11661-000-0050-1 ↗
6. 10.1016/S0925-8388(00)01062-810.1016/S0925-8388(00)01062-8 ↗
7. 10.1007/s10853-009-3935-410.1007/s10853-009-3935-4 ↗
8. 10.1179/mst.1992.8.8.68510.1179/mst.1992.8.8.685 ↗
9. 10.1590/S1516-1439201000030002010.1590/S1516-14392010000300020 ↗
10. 10.1016/S0925-8388(99)00014-610.1016/S0925-8388(99)00014-6 ↗
11. 10.1016/S1350-6307(00)00015-710.1016/S1350-6307(00)00015-7 ↗
12. 10.1016/j.matchar.2008.08.00710.1016/j.matchar.2008.08.007 ↗
13. ASM International: ‘Metals handbook’, Vol. 9, ‘Metallography and microstructures’, 2733; 2004, Materials Park, OH, ASM International.
14. 10.1016/j.corsci.2005.08.01710.1016/j.corsci.2005.08.017 ↗
15. 10.1016/j.msea.2003.12.01310.1016/j.msea.2003.12.013 ↗
16. ‘Image Tool version 3.0’, University of Texas Health Science Center at San Antonio, San Antonio, TX, USA, http://ddsdx.uthscsa.edu/dig/itdesc.html
17. ‘Standard test method for electrochemical critical pitting temperature testing of stainless steels’, ASTM G150-99, ASTM International, West Conshohocken, PA, USA, 2010.
18. 10.1016/j.jallcom.2009.12.12710.1016/j.jallcom.2009.12.127 ↗
19. 10.1016/j.corsci.2007.07.01410.1016/j.corsci.2007.07.014 ↗