journal article·2012-10

Influence of indenter shape on DLC film failure during multiple load cycle nanoindentation

N. H. Faisal, R. Ahmed, Y. Q. Fu, Y. O. Elakwah, M. Alhoshan

Materials Science and Technology· Volume 28· Issue 9-10
Publisher page

Abstract

The aim of the present investigation is to understand the localised failure mechanism of diamond-like carbon (DLC) film during multiple load cycle nanoindentation. The DLC film investigated was 500 nm thick sputter coated on Si (100) wafer of 500 μm thickness. Multiple load cycle nanoindentation tests under diamond Berkovich and conical indenters were performed using a calibrated NanoTest at five different load ranges between 0·1 and 500 mN. Test results indicated forward deviation, no deviation and backward deviation of the force–displacement profile, which provided some insights to the mechanisms of localised film failure. During backward deviation, film failure starts from interfacial delamination. This was observed for a conical indenter in a particular load range (1–10 mN). An elastic finite element model during nanoindentation loading indicated that this was caused by the location of maximum stress near the interface. Forward depth deviation was observed for conical and Berkovich indenter at all the other load ranges.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Engineering, Alfaisal University, PO Box 50927, Riyadh 11533, Saudi Arabia

School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh EH14 4AS, UK

Thin Film Centre, Scottish Universities Physics Alliances (SUPA), University of West of Scotland, Paisley PA1 2BE, UK

King Abdullah Institute for Nanotechnology, King Saud University, PO Box 800, Riyadh 11421, Saudi Arabia

References (46)

Show source-provided references
1. Faisal N. H. · Recent Patents Mech. Eng. · 2011 · 4 · 138
2. 10.1179/1743280410Y.000000000410.1179/1743280410Y.0000000004 ↗
3. 10.1179/09506600322501022710.1179/095066003225010227 ↗
4. 10.1016/j.tsf.2006.07.07410.1016/j.tsf.2006.07.074 ↗
5. 10.1016/j.tsf.2007.06.03210.1016/j.tsf.2007.06.032 ↗
6. Chen J. · 2008
7. 10.1016/S0043-1648(00)00442-710.1016/S0043-1648(00)00442-7 ↗
8. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
9. 10.1088/0022-3727/38/24/R0110.1088/0022-3727/38/24/R01 ↗
10. 10.1016/j.surfcoat.2005.03.01810.1016/j.surfcoat.2005.03.018 ↗
11. 10.1016/j.cirp.2010.05.00910.1016/j.cirp.2010.05.009 ↗
12. 10.1016/j.surfcoat.2004.10.02110.1016/j.surfcoat.2004.10.021 ↗
13. 10.1016/j.scriptamat.2011.02.00910.1016/j.scriptamat.2011.02.009 ↗
14. Faisal N. H., Ahmed R., and Fu Y. Q.: Proc. Advanced Materials Technologies Conf. (AMTC’11), Riyadh, Saudi Arabia, October 2011, King Abdulaziz City for Science and Technology, 36–44.
15. 10.1179/174329409X45113710.1179/174329409X451137 ↗
16. 10.1016/S0257-8972(03)00934-410.1016/S0257-8972(03)00934-4 ↗
17. 10.1016/S1359-6454(02)00429-910.1016/S1359-6454(02)00429-9 ↗
18. Ahmed R. · 2012
19. Faisal N. H., Ahmed R., and Fu Y. Q.: Proc. 3rd Int. Conf. on ‘Nanotechnology’, Al-Ain, UAE, November 2011, United Arab Emirates University, Paper no. D3–S3, 137.
20. 10.1063/1.131377610.1063/1.1313776 ↗
21. 10.1088/0022-3727/39/7/00910.1088/0022-3727/39/7/009 ↗
22. 10.1016/S0040-6090(98)01512-010.1016/S0040-6090(98)01512-0 ↗
23. 10.1016/0040-6090(94)06241-C10.1016/0040-6090(94)06241-C ↗
24. 10.1016/j.matlet.2003.07.02710.1016/j.matlet.2003.07.027 ↗
25. 10.1016/S0257-8972(00)00552-110.1016/S0257-8972(00)00552-1 ↗
26. Beake B. D. · 2011
27. 10.1016/j.apsusc.2005.06.05410.1016/j.apsusc.2005.06.054 ↗
28. 10.1016/j.wear.2009.01.00410.1016/j.wear.2009.01.004 ↗
29. Drory M. D. · Proc. R. Soc. Lond. A · 1996 · 452 · 231910.1098/rspa.1996.0124 ↗
30. 10.1109/TDMR.2004.82907110.1109/TDMR.2004.829071 ↗
31. 10.1007/s10853-011-5865-110.1007/s10853-011-5865-1 ↗
32. 10.1016/S0040-6090(01)01343-810.1016/S0040-6090(01)01343-8 ↗
33. 10.1016/j.ijsolstr.2008.10.03210.1016/j.ijsolstr.2008.10.032 ↗
34. 10.1016/j.tsf.2011.09.03610.1016/j.tsf.2011.09.036 ↗
35. 10.1088/0965-0393/14/1/00610.1088/0965-0393/14/1/006 ↗
36. 10.1016/j.tsf.2004.08.09610.1016/j.tsf.2004.08.096 ↗
37. 10.1016/j.diamond.2011.04.00410.1016/j.diamond.2011.04.004 ↗
38. 10.1016/j.actamat.2006.05.00310.1016/j.actamat.2006.05.003 ↗
39. 10.1016/j.diamond.2004.08.00310.1016/j.diamond.2004.08.003 ↗
40. 10.1016/S0257-8972(99)00211-X10.1016/S0257-8972(99)00211-X ↗
41. 10.1016/S0263-4368(98)00069-910.1016/S0263-4368(98)00069-9 ↗
42. 10.1016/0040-6090(92)90285-J10.1016/0040-6090(92)90285-J ↗
43. 10.1179/02670840322501013610.1179/026708403225010136 ↗
44. 10.1016/S0925-9635(02)00305-910.1016/S0925-9635(02)00305-9 ↗
45. 10.1063/1.37161410.1063/1.371614 ↗
46. 10.1016/S0925-9635(00)00565-310.1016/S0925-9635(00)00565-3 ↗