Preparation of Ni–Cr alloy foams by electrodeposition technique
Source abstract
Abstract
Metallic foams have many applications in industry and are made using various methods. However, no suitable method for heating Ni–Cr alloy foam has been available. A method of preparing Ni–Cr alloy foam by an electrodeposition technique is described in the present paper. The method includes the following steps: establishing electrical conductivity of organic foam; electroplating of a Ni layer; electroplating of a Cr layer; eliminating the organic matrix and a homogenisation heat treatment. The plating solutions and process parameters of electrodeposition are introduced in detail. Homogenisation of the samples was carried out in a sealed quartz tube at 1100°C and the homogenisation time was determined by experiment and calculation. Experimental results are shown indicating that the Ni–Cr alloy foam made by this electrodeposition technique had a three-dimensional reticulated structure and formed a single phase Ni based solid solution. Also, the apparent resistivity was measured and it is demonstrated that the higher resistivity of the foam gave it good electrical heating properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Cellular and Composite Structures · Nanoporous metals and alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Liu P. S. · J. Mater. Sc
2. 10.1023/A:102575522596910.1023/A:1025755225969 ↗
3. 10.1002/(SICI)1527-2648(200004)2:4<196::AID-ADEM196>3.0.CO;2-K10.1002/(SICI)1527-2648(200004)2:4<196::AID-ADEM196>3.0.CO;2-K ↗
4. 10.1007/BF0070255410.1007/BF00702554 ↗
5. 10.1557/JMR.2001.014310.1557/JMR.2001.0143 ↗
6. Choe H., and Dunand D. C.: Acta Mater. 2004, 52, 1283–1295.10.1016/j.actamat.2003.11.012 ↗
7. 10.1016/S0921-5093(04)00814-710.1016/S0921-5093(04)00814-7 ↗
8. 10.1023/A:101283702861410.1023/A:1012837028614 ↗
9. Kamelin V. V. · Russ. J. Appl. Chem · 1998 · 71 · 257
10. 10.1179/174328406X11113810.1179/174328406X111138 ↗
11. Liu P. S. ‘Introduction of porous material’: 2004, Beijing, Tsinghua University Press.
12. Zhang B. C. ‘Technology of electro-deposition’; 1992, Beijing, Beijing University of Aeronautic & Astronautics Press.
13. Tan Q. X., and Guo H. T. ‘The principle and process of eletro-deposition’: 1985, Tianjing, Tianjing Science and Technology Press.
14. 10.1080/00202967.1972.1187024810.1080/00202967.1972.11870248 ↗
15. Jilin University: ‘Physical chemistry’; 1980, Beijing, People's Education Press.
16. ‘CRC handbook of chemistry and physics’, 65th edn, D219; 1984-1985, Boca Raton, FL, CRC.