journal article·2010-10

Overload failure behaviour of dissimilar thickness resistance spot welds during tensile shear test

S. P. H. Marashi, M. Pouranvari, M. Salehi, A. Abedi, S. Kaviani

Materials Science and Technology· Volume 26· Issue 10
Publisher page

Abstract

Resistance spot welding is the dominant process for joining sheet metals in automotive industry. Even thickness combinations are rarely used in practice; therefore, there is clearly a practical need for failure behaviour investigation of uneven thickness resistance spot welds. The aim of the present paper is to investigate the failure mode and failure mechanism of dissimilar thickness low carbon steel resistance spot welds during tensile shear overload test. Microstructural investigations, microhardness tests and tensile shear tests were conducted. Mechanical properties of the joints were described in terms of peak load, energy absorption and failure mode. In order to understand the failure mechanism, micrographs of the cross-sections of the spot welded joints during and after tensile shear are examined by optical microscopy. It was found that for well established weld nuggets, the final solidification line is located in the geometrical centre of the joint. In pull-out failure mode, failure is initiated by necking of the base metal at the thinner thickness sheet. Finally, it was concluded that weld nugget size, weld penetration and the strength of the thinner sheet are the main controlling factors of the peak load and energy absorption of dissimilar thickness spot welds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mining and Metallurgical EngineeringAmirkabir University of Technology, Tehran, Iran;, Email: pirmarashi@yahoo.co.uk

Department of Materials and Metallurgical EngineeringSchool of Engineering, Islamic Azad University, Dezful Branch, Dezful, Iran

Department of Mining and Metallurgical EngineeringAmirkabir University of Technology, Tehran, Iran

Department of MetallurgyShahid Rajaee University, Tehran, Iran

Department of Mechanical EngineeringImam Hossein University, Tehran, Iran

References (16)

Show source-provided references
1. 10.1016/j.engfailanal.2007.01.01810.1016/j.engfailanal.2007.01.018 ↗
2. Marya M., and Gayden X. Q.: Weld J., 2005, 84, 197s–204s.
3. 10.1179/174329307X24934210.1179/174329307X249342 ↗
4. Zuniga S. and Sheppard S. D.: in ‘Fatigue and fracture mechanics’ Vol. 27 ASTM STP 1296 (ed. R. S. Piascik et al) 469-489; 1997 Philadelphia PA ASTM.10.1520/STP16249S ↗
5. Williams N. T., and Parker J. D.: Int. Mater. Rev., 2005, 49, 45–75.
6. Zhang H. and Senkara J.: ‘Resistance welding: fundamentals and applications’ 196-201; 2005 Boca Raton FL CRC Press.10.1201/b12507 ↗
7. Gould J. E.: Weld J., 1987, 66, 1s–10s.
8. Houldcroft P. T.: ‘Welding process technology’ 3rd edn; 2004 Cambridge Cambridge University Press.
9. De A. Walsh C. A. Maiti S. K. and Bhadeshia H. K. D. H.: Set Technot Weld Join. 2003 8 391–398.10.1179/136217103225005633 ↗
10. Gould J. E., , Khurana S. P., and Li T.: Weld J., 2006, 86, 111s–116s.
11. Chao Y. J.: Set Technot Weld Join. 2003 8 133–137.10.1016/S0378-4274(02)00465-4 ↗
12. 10.1179/174329307X16440910.1179/174329307X164409 ↗
13. 10.1016/j.msea.2007.07.00710.1016/j.msea.2007.07.007 ↗
14. 10.1115/1.213775110.1115/1.2137751 ↗
15. Sun X. Stephens E. V. and Khaleel M. A.: Weld. J. 2007 86 18s-25s.
16. 10.1016/j.jmatprotec.2003.11.02910.1016/j.jmatprotec.2003.11.029 ↗