journal article·2012-03

Reliability of Pb-free solders for harsh environment electronic assemblies

S Godard Desmarest

Materials Science and Technology· Volume 28· Issue 3
Publisher page

Abstract

Since 2006 and the implementation of environmental regulations, the electronic industry has moved to Pb-free solders. Harsh environment industries that were exempted from the regulations will soon have to follow suit. However, a suitable replacement solder for use in harsh environments still has to be validated and reliability models are yet to be established. In this review, research that led to the selection of currently used Pb-free alloys and the continuing search for high reliability alloys are described. Sn pest and Sn whiskers, potential major threats for electronics operating in harsh environments, are highlighted. This review also focuses on the microstructure, mechanical properties and deformation mechanisms of Pb-free alloys. Emphasis is placed on Sn–Ag–Cu alloys, now considered to be the alloys of choice for replacement of Sn–Pb solders. The reliability of Pb-free electronic assemblies is studied, focusing on thermal fatigue, believed to be the main source of failure through creep–fatigue mechanisms. The validity of models for Pb-free solder joints life time prediction is assessed and the lack of cohesiveness among the available reliability data is examined.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials University of Oxford, Parks Road, Oxford OX1 3PH, UK

References (100+)

Show source-provided references
1. ‘Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment’, Official Journal of the European Union L 37, 13·2·2003, 19.
2. ‘World electronic industries 2008–2013’, Executive summary, Decision Etudes Conseil, Paris, France, 2009.
3. Arra M, Xie DJ, Shangguan D: ‘Performance of Pb-free solder joints under dynamic mechanical loading’, Proc. IEEE 52nd ECTC, May 2002, San Diego, CA, USA, IEEE, 1256–1562.10.1109/ECTC.2002.1008267 ↗
4. 10.1016/j.microrel.2005.10.01110.1016/j.microrel.2005.10.011 ↗
5. Wong EH, Rajoo R, Mai YW, Seah SKW, Tsai KT, Yap LM: ‘Drop impact: fundamentals and impact characterisation of solder joints’, Proc. IEEE 55th ECTC, June 2005, Lake Buena Vista, FL, USA, IEEE, 1202–1209.10.1109/ECTC.2005.1441423 ↗
6. 10.1109/ECTC.2007.37384510.1109/ECTC.2007.373845 ↗
7. ‘Directive 20002/96/EC of the European Parliament and the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE)’, Official Journal of the European Union L 37, 13·2·2003, 24.
8. 10.1108/eb04619910.1108/eb046199 ↗
9. ‘NCMS lead-free solder project final report’, Report no. 0401RE96, National Centre for Manufacturing Sciences, Ann Arbor, MI, USA, 1997.
10. ‘JEIDA report on research and development on lead-free soldering’, Japan Electronic Industry Development Association, Tokyo, Japan, 2000.
11. Harrison MR, Vincent JH: ‘Improved design life and environmentally aware manufacturing of electronics assemblies by lead-free soldering’, Proc. 12th Microelectronics and Packaging Conf., June 1999, IMAPS Europe, Cambridge, 98-104.10.2320/materia.38.972 ↗
12. 10.1007/s11837-001-0097-510.1007/s11837-001-0097-5 ↗
13. ‘Lead-free assembly project’, Final report, iNEMI, Herndon, VA, USA, December 2003.
14. ‘Low temperature lead-free soldering’, Report, Japan Institute of Electronics Packaging, Tokyo, Japan, 2002.
15. ‘Lead free electronics Manhattan project phase 2 report’, ACI Technologies Inc., Philadelphia, PA, USA, 2010.
16. Brown S: ‘Development of a fatigue resistant alloy for high performance automotive applications, Internal report, Cookson Electronics, Providence, RI, USA, 2009.
17. ‘Challenges and efforts toward commercialization of lead-free solder-road map 2000 for commercialization of lead-free solder’, Version 1·3, JEIDA, Tokyo, Japan, July 2000.
18. Bath J · Circ. Assemb. · 2000 · 11 · 30
19. ‘Round robin testing and analysis of lead free solder pastes with alloys of tin, silver and copper’, Final report II, IPC Solder Product Value Council, Bannockburn, IL, USA, 2003.
20. McCormick H, Snugovsky P, Hamilton C, Bagheri Z, Bagheri S: ‘The great SAC debate: comparing the reliability of SAC305 and SAC405 solders in a variety of applications’, Proc. PanPac Symposium, January 2007, 333-341.
21. ‘European lead-free technology roadmap’, Version 1, Soldertec, St Albans, UK, February 2002, 8.
22. 10.1016/S0026-2714(02)00239-110.1016/S0026-2714(02)00239-1 ↗
23. 10.1016/j.jallcom.2008.11.05210.1016/j.jallcom.2008.11.052 ↗
24. 10.1016/j.jallcom.2008.04.04410.1016/j.jallcom.2008.04.044 ↗
25. 10.1016/j.microrel.2011.02.00510.1016/j.microrel.2011.02.005 ↗
26. 10.1179/174328409X44325410.1179/174328409X443254 ↗
27. 10.1007/BF0068727510.1007/BF00687275 ↗
28. 10.1108/0954091071083651110.1108/09540910710836511 ↗
29. 10.1115/1.140075110.1115/1.1400751 ↗
30. 10.1109/TEPM.2002.100048210.1109/TEPM.2002.1000482 ↗
31. 10.1007/s11837-001-0099-310.1007/s11837-001-0099-3 ↗
32. Osterman M · J. Mater. Sci. · 2007 · 18 · 229
33. ‘NIST Pb-free database’, Solder data sheet, NIST, Hamilton, Ont., Canada (as reported in Tables 1·13 and 1·14 of NIST Pb-free database,www.boulder.nist.gov/div853/lead_free/solders.html).
34. ‘Room temperature tensile properties of lead-free solder alloys’, Technical reports for the Lead Free Solder Project: Properties Reports, National Center for Manufacturing Sciences, Ann Arbor, MI, USA, 1998, 33-38
35. Madeni J, Liu S, Siewert T: ‘Casting of lead-free solder specimens with various solidification rates’, Proc. ASM Int. Conf., November 2001, Indianapolis, IN, USA, ASM.
36. Sigelko J · Adv. Mater. Proc. · 2000 · 47
37. 10.2172/67686910.2172/676869 ↗
38. Shang JK · J. Mater. Sci. · 2007 · 18 · 211
39. National Institute of Standards and Technology: www.metallurgy.nist.gov/phase/solder/solder.html
40. Ma H, Suhling JC, Lall P, Bozack MJ: ‘Effects of aging on the stress–strain and creep behaviors of lead free solders’, Proc. IEEE 56th ECTC, May–June 2006, San Diego, CA, USA, IEEE, 961.
41. 10.1179/imr.1995.40.2.6510.1179/imr.1995.40.2.65 ↗
42. 10.1108/0954091081090265110.1108/09540910810902651 ↗
43. 10.1109/ECTC.2007.37391310.1109/ECTC.2007.373913 ↗
44. 10.1007/s11664-005-0181-710.1007/s11664-005-0181-7 ↗
45. 10.1016/S0921-5093(02)00461-610.1016/S0921-5093(02)00461-6 ↗
46. Schueller R · SMTA J. · 2010 · 23 · 18
47. 10.1007/s11664-003-0125-z10.1007/s11664-003-0125-z ↗
48. 10.1557/JMR.2002.040210.1557/JMR.2002.0402 ↗
49. 10.1016/j.actamat.2004.06.01010.1016/j.actamat.2004.06.010 ↗
50. 10.1007/s11664-009-0873-510.1007/s11664-009-0873-5 ↗
51. 10.1109/ECTC.2006.164576310.1109/ECTC.2006.1645763 ↗
52. 10.1557/JMR.2004.043610.1557/JMR.2004.0436 ↗
53. 10.1016/0022-5096(70)90018-910.1016/0022-5096(70)90018-9 ↗
54. 10.1016/0022-0248(80)90049-410.1016/0022-0248(80)90049-4 ↗
55. 10.1007/BF0167145410.1007/BF01671454 ↗
56. 10.1007/s11664-007-0165-x10.1007/s11664-007-0165-x ↗
57. Plumbridge WJ · J. Mater. Sci · 2007 · 18 · 307
58. 10.1063/1.33303510.1063/1.333035 ↗
59. 10.1016/S0925-8388(96)02734-X10.1016/S0925-8388(96)02734-X ↗
60. 10.1149/1.278113610.1149/1.2781136 ↗
61. 10.1016/S0167-577X(02)00615-810.1016/S0167-577X(02)00615-8 ↗
62. ‘Performance test methods and qualification requirements for surface mount attachments’, IPC-9701, IPC, Bannockburn, IL, USA, January 2002.
63. 10.1080/00202967.1974.1187031310.1080/00202967.1974.11870313 ↗
64. Brusse JA, Ewell G, Siplon JP: Proc. 22nd Symp. on ‘Capacitor and resistor technology’, March 2002, New Orleans, LA, USA, Electronic Components, Assemblies and Materials Association, 67–80.
65. Zhang Y, Breck G, Humiec F, Murski K, Abys JA: Proc. SMI ’96, San Jose, CA, USA, September 1996, SMI, 641-649.
66. 10.1016/S1359-6454(98)00045-710.1016/S1359-6454(98)00045-7 ↗
67. Schetty R: Proc. IPC Works Conf., September 2000, Miami, FL, USA, IPC/JEDEC, 137-161.
68. 10.1147/rd.133.026610.1147/rd.133.0266 ↗
69. 10.1109/EPTC.2007.446979410.1109/EPTC.2007.4469794 ↗
70. Coffin LF · ASME Trans. · 1954 · 76 · 931
71. Manson SS: ‘Thermal stress and low cycle fatigue’, 125–192; 1966, New York, Mc Graw-Hill.
72. 10.1007/s11664-002-0100-010.1007/s11664-002-0100-0 ↗
73. 10.1007/s11664-998-0074-710.1007/s11664-998-0074-7 ↗
74. Zhao J · Solder. Surf. Mount Technol. · 2005 · 14 · 37
75. Pan N, Henshall GA, Billaut F, Dai S, Strum MJ, Lewis R, Benedetto E, Rayner J: ‘An acceleration model for Sn–Ag–Cu solder joint reliability under various thermal cycle conditions’, Proc. SMTA Int. Conf., September 2005, Chicago, IL, USA, SMTA, 876-883.
76. 10.1007/978-0-387-68422-2_610.1007/978-0-387-68422-2_6 ↗
77. Clech J.P: ‘Lead-free and mixed assembly solder joint reliability trends’, Proc. IPC/SMEMA Council APEX, Anaheim, CA, USA, February 2004, IPC, S-28-3-1 to S-28-3-14.
78. ‘JCAA/JG-PP Lead-free solder project’, NASA Technology Evaluation for Environmental Risk Mitigation (TEERM) Principal Center Joint test report, NASA, Washington, DC, USA, 2009.
79. 10.1109/ECTC.2003.121634310.1109/ECTC.2003.1216343 ↗
80. Cadek J: ‘Creep in metallic materials’; 1988, New York, Elsevier.
81. 10.1007/s11661-005-0142-z10.1007/s11661-005-0142-z ↗
82. 10.1016/0025-5416(78)90029-010.1016/0025-5416(78)90029-0 ↗
83. 10.1007/s10853-008-3125-910.1007/s10853-008-3125-9 ↗
84. 10.1007/BF0265542710.1007/BF02655427 ↗
85. Wiese S, Schubert A, Walter H, Dudek R, Feustel F, Meustel E, Michel B: Proc. IEEE 51st ECTC, May 2001, Orando, FL, USA, IEEE, 890.10.1109/ECTC.2001.927900 ↗
86. Clech JP: ‘Review and analysis of lead-free solder material properties’, Report, NIST, Gaithersburg, MD, USA, 2002, www.metallurgy.nist.gov/solder/clech/Introduction.htm
87. 10.1007/BF0269256610.1007/BF02692566 ↗
88. 10.1115/1.152525410.1115/1.1525254 ↗
89. 10.1007/s11664-005-0233-z10.1007/s11664-005-0233-z ↗
90. Zhang Q, Dasgupta A, Haswell P: ‘Viscoplastic constitutive properties and energy-partitioning model of lead-free Sn–3·9Ag–0·6Cu solder alloy’, Proc. IEEE 53rd ECTC, May 2003, New Orleans, FL, USA, IEEE, 1862–1868.
91. 10.1109/ECTC.2003.121628110.1109/ECTC.2003.1216281 ↗
92. Pang JHL, Xiong BS, Low TH: ‘Creep and fatigue properties of lead free Sn–3·8Ag–0·7Cu solder’, Proc. IEEE 54th ECTC, June 2001, Piscataway, NJ, USA, IEEE, 1333–1337.10.1109/ECTC.2004.1320285 ↗
93. 10.1007/BF0267334210.1007/BF02673342 ↗
94. 10.1109/ECTC.2001.92790010.1109/ECTC.2001.927900 ↗
95. 10.1115/1.207009110.1115/1.2070091 ↗
96. 10.1108/0954091031050508010.1108/09540910310505080 ↗
97. 10.1063/1.36977910.1063/1.369779 ↗
98. 10.1115/1.207004910.1115/1.2070049 ↗
99. Darveaux R · IEEE Trans. CHMT · 1992 · 15 · 1013
100. 10.1007/s11837-003-0144-510.1007/s11837-003-0144-5 ↗