journal article·2001-05

Identification of processing parameters for Fe–15Cr–2.2Mo–15Ni–0.3Ti austenitic stainless steel using processing maps

P.V. Sivaprasad, S.L. Mannan, Y.V.R.K. Prasad, R.C. Chaturvedi

Materials Science and Technology· Volume 17· Issue 5
Publisher page

Abstract

The processing parameters for hot working of Fe–15Cr–2.2Mo–15Ni–0.3Ti austenitic stainless steel (alloy D9) are identified using processing maps developed on the basis of the dynamic materials model and hot compression data in the temperature range 850–1250°C and strain rate range 0.001–100 s-1. The efficiency of power dissipation increased with increase in temperature and decrease in strain rate. Dynamically recrystallised microstructures resulted when the efficiency of power dissipation was in the range 27–37%, i.e. in the temperature range 1050–1250°C and strain rate range 0.001–0.5 s-1. Flow localisation occurred in the regions of instability at temperatures lower than 1000°C and at higher strain rates. The dynamic recrystallisation regime observed in this alloy is compared with other austenitic stainless steels, namely, AISI type 304L and 316L.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. 10.1007/BF0266490210.1007/BF02664902 ↗
2. J. M. ALEXANDER: in ‘Modeling of hot deformation of steels’, (ed. J. G. Lenard), 101; 1984, Berlin, Springer.
3. PRASAD Y. V. R. K. · Indian J. Technol · 1990 · 28 · 435
4. VENKADESAN S. · Trans. Indian Inst. Met · 1992 · 45 · 57
5. 10.1007/BF0264612810.1007/BF02646128 ↗
6. 10.1179/mst.1993.9.10.89910.1179/mst.1993.9.10.899 ↗
7. 10.1016/0924-0136(90)90005-F10.1016/0924-0136(90)90005-F ↗
8. RYAN N. D. · Technol · 1990 · 8 · 185
9. 10.1007/BF0274461810.1007/BF02744618 ↗
10. J. FROST and M. F. ASHBY: ‘Deformation mechanism maps’; 1982, Oxford, Pergamon.
11. 10.1007/BF0266236410.1007/BF02662364 ↗
12. MALAS J. C. · J. Mater · 1992 · 44 · 8
13. ALMASAN C. · Rev. Roum. Sci. Tech.-Mec. Appl · 1981 · 26 · 249