journal article·2013-07

Design of 10Cr martensitic steels for improved creep resistance in power plant applications

U A Sachadel, P F Morris, P D Clarke

Materials Science and Technology· Volume 29· Issue 7
Publisher page

Abstract

The drive to increase the efficiency of fossil fired power generation to reduce CO2 emissions and to conserve energy resources has led Tata Steel to design new 10Cr martensitic compositions for use at temperatures of 620°C and above with creep properties superior to steel 92 (9Cr, 0·5Mo, and 2W), which is the best currently available steel of this type. In the new alloys, the chromium content was set at 10 to ensure the required oxidation resistance. The long term creep performance of steels with this level of chromium has been limited by the precipitation of Z phase nitrogen rich particles. These form at the expense of vanadium rich MN precipitates that are vital for long term creep strength. Compositions have been designed with the aim of suppressing or delaying Z phase formation. The principles underlying the new steel chemistries are discussed, and a detailed explanation is given of the role of heat treatment in optimising creep rupture strength at temperatures in excess of 600°C. The new steel compositions are based on published work supplemented by thermodynamic calculations to optimise the heat treatment cycle, to produce a fully martensitic microstructure and to maximise the stable nanoprecipitates that are essential to maximise creep rupture life.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Netherlands & Swinden Technology Centre, IJmuiden RD&T, Tata Steel Europe, Rotherham, UK

References (7)

Show source-provided references
1. Morris PF, Sachadel UA, Clarke PD: ‘Design of heat treatments for 9–12Cr steels to optimise creep resistance for power plant applications’, Proc. 9th Liège Conf. on ‘Materials for advanced power engineering’, Liège, Belgium, September 2010, 554–564.
2. Yoshizawa M, Igarashi M: ‘Long-term creep deformation characteristics of advanced ferritic steels for USC power plants’, Proc. ECCC Creep Conf., London, UK, September 2005, 110–118.
3. 10.1016/j.msea.2007.09.03110.1016/j.msea.2007.09.031 ↗
4. Götz G · Mater. Sci. Eng. A · 2003 · 348 · 200110.1016/S0921-5093(02)00684-6 ↗
5. 10.1016/j.msea.2007.09.03110.1016/j.msea.2007.09.031 ↗
6. 10.2355/isijinternational.42.77910.2355/isijinternational.42.779 ↗
7. Igarashi M, Muneki S, Hasegawa H, Yamada K, Abe F: ‘Creep deformation and the corresponding microstructural evolution in high-Cr ferritic steels’, ISIJ Int. 2001, 41, Supplement, S101–S105.10.2355/isijinternational.41.Suppl_S101 ↗