On precipitates in Fe–Ni base alloys used for USC boilers
Source abstract
Abstract
This paper overviews the effects of some precipitates in Fe–Ni base boilers materials. The volume fraction of these precipitates is usually below 10 for maintaining the microstructure stability and manufacture ability. They appear in a number of morphologies, but all of them improve the creep strength when they exist in small size. For the alloys serviced below 650°C, the strengthening precipitates disperse within the matrix and maintain their diameter below 100 nm during long time exposure. For the alloys serviced above 650°C, the strengthening precipitates are normally larger than 100 nm in equivalent diameter. They may experience long growth duration and thus keep their size below 500 nm. Meanwhile, the precipitates may improve creep strength when they are dispersed over the grain boundaries.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Thermal Power Research Institute Co., Ltd, National Engineer Research Center of Clean Coal Combustion for Utility Boilers, Xi'an, Shaanxi, China
References (100+)
Show source-provided references
1. Blum R and Bugge J: ‘The European perspective and advancements for advanced USC steam power plants’, Proc. 6th Int. Conf. on ‘Advances in materials technology for fossil power plants’, August–September 2010, Santa Fe, NM, USA, ASM International, 1–10.10.31399/asm.cp.am-epri-2010p0001 ↗
2. Maziasz PJ, Wright IG, Shingeldecker JP, Gibbons TB and Romanosky RR: ‘Defining the materials issues and research for ultra-supercritical steam turbines’, Proc. 19th Annual Conf. on ‘Fossil energy materials’, Pittsburgh, PA, USA, May 2005, National Energy. Technology Laboratory, 9–11.
3. Wright IG, Maziasz PJ, Ellis FV, Gibbons TB, and Woodford DA: ‘Materials issues for turbines for operation in ultra-supercritical steam’, Research sponsored by the US Department of Energy, Office of Fossil Energy, Advanced Research Materials Program, under contract no. DE-AC05-00OR22725 with UT-Battelle, LLC. 2004.
4. Weitzel PS: ‘Steam generator for advanced ultra-supercritical power plants 700 to 760°C’, Proc. ASME 2011 Power Conf., Denver, CO, USA, July 2011, ASME, Technical paper no. BR-1852.10.1115/POWER2011-55039 ↗
5. 10.1016/j.ijpvp.2006.08.00610.1016/j.ijpvp.2006.08.006 ↗
6. Kakaras E, Doukelis A, Grammelis P, Koumanakos A and Agraniotis M: ‘Concept study for a 700°C power plant: using poor quality brown coal with ultra supercritical PF boiler’, National Technical University of Athens Mechanical Engineering Department Thermal Engineering Section, Athens, Greece, 2006.
7. Gandy D and Shingledecker J: ‘Fossil materials research at EPRI’, Proc. 6th Int. Conf. on ‘Advances in materials technology for fossil power plants’, August–September 2010, Santa Fe, NM, USA, ASM International, 65–71.10.31399/asm.cp.am-epri-2010p0065 ↗
8. 10.1179/1743284713Y.000000031010.1179/1743284713Y.0000000310 ↗
9. Otsuka T and Kaneko M: ‘Development history and operation experience of ultra-supercritical (USC) power plants’, Proc. Int. Conf. on ‘Power engineering 2007’, December 2007, Hangzhou, China, Chinese Society of Power Engineering, 214–218.10.1007/978-3-540-76694-0_39 ↗
10. 10.1361/10599490177034539410.1361/105994901770345394 ↗
11. Guo J: ‘Materials science and engineering for superalloy’, (ed. Hou S); 2008, Beijing, Science Press.
12. 10.1179/02670830110150897210.1179/026708301101508972 ↗
13. 10.1361/1059949052403910.1361/10599490524039 ↗
14. 10.1520/STP46110S10.1520/STP46110S ↗
15. Jack DH · J. Iron Steel Inst. · 1972 · 210 · 790
16. 10.1038/142569b010.1038/142569b0 ↗
17. 10.1038/142570a010.1038/142570a0 ↗
18. 10.1007/BF0149321410.1007/BF01493214 ↗
19. Denham AW · J. Iron Steel Inst. · 1969 · 207 · 585
20. Barker J · J. Met. · 1970 · 22 · 31
21. 10.7449/1997/Superalloys_1997_409_41510.7449/1997/Superalloys_1997_409_415 ↗
22. 10.1179/mst.1996.12.6.46910.1179/mst.1996.12.6.469 ↗
23. 10.1016/j.msea.2007.12.02210.1016/j.msea.2007.12.022 ↗
24. Chester TS · J. Met. · 1969 · 21 · 27
25. Sullivan CP · Met. Eng. Q. · 1971 · 11 · 1
26. 10.1179/1743284713Y.000000023310.1179/1743284713Y.0000000233 ↗
27. 10.1179/1743284712Y.000000013310.1179/1743284712Y.0000000133 ↗
28. 10.1179/1362171814Y.000000019710.1179/1362171814Y.0000000197 ↗
29. 10.1590/S1516-1439200700040002110.1590/S1516-14392007000400021 ↗
30. 10.1007/s11661-005-0135-y10.1007/s11661-005-0135-y ↗
31. 10.1016/j.pnsc.2012.05.00210.1016/j.pnsc.2012.05.002 ↗
32. G. Chai, P. Kjellström1 and M. Boström: ‘Creep and fracture behaviors of an advanced heat resistant austenitic stainless steel for A-USC power plant’, Proc. 13th Int. Conf. on ‘Fracture’, Beijing, China, 13th International Conference on Fracture (ICF13), June 2013. 1–9.
33. 10.1016/j.msea.2012.12.01910.1016/j.msea.2012.12.019 ↗
34. 10.2355/tetsutohagane1955.76.7_117910.2355/tetsutohagane1955.76.7_1179 ↗
35. Semba H, Okada H, Hamaguchi T, Ishikawa S and Yoshizawa M: ‘Development of boiler tubes and pipes for advanced USC power plants’, Nippon Steel Sumitomo Metals Technical Report Is 397, 2013, 71–77.
36. 10.5772/2841210.5772/28412 ↗
37. Semba H, Okada H, Igarasbi M, Hirata H and Yoshizawa M: ‘Development of Fe–Ni and Ni-base alloys without γ′ strengthening for advanced USC boilers’, Proc. 9th Liege Conf. on ‘Materials for advanced power engineering 2010’, Liege, Belgium, Schriften des Forschungszentrum Julich, Reihe energietechnik/Energy Technology Forschungszentrum Julich, September 2010, 360–369.
38. Takeyama M · Denki-Seiko · 2012 · 83 · 27
39. 10.1016/j.intermet.2007.12.00510.1016/j.intermet.2007.12.005 ↗
40. Hsieh C.-C · Int. Scholarly Res. Network · 2012 · 2012 · 732471
41. Kikuchi M. Sakabibara M, Otoguro Y, Mimura M, Takahashi T and Fujita T: ‘An austenitic heat resisiting steel tube developed for advanced fossil steam plant’, Proc. Int. Conf. on ‘Creep’, Tokyo, Japan, April 1986, Japan Society of Mechanical Engineers, 215–220.10.1007/978-94-009-1347-9_25 ↗
42. 10.1179/03063457679043138110.1179/030634576790431381 ↗
43. Peng Z · Acta Metall. Sinica · 2012 · 48 · 45010.3724/SP.J.1037.2011.00677 ↗
44. 10.1179/mst.1986.2.8.79510.1179/mst.1986.2.8.795 ↗
45. 10.1007/BF0283411610.1007/BF02834116 ↗
46. Igarashi M: ‘Landolt–Börnstein numerical data and functional relationships in science and technology’, in ‘Group VIII: advanced materials and technologies, (ed. K. Yagi et al.), Vol. 2, 292–296; 2004, Berlin, Springer-Verlag.
47. Minami Y, Caminada S, Fukui T and Ono T: ‘Long term properties and microstructural evolution of 18Cr–10Ni–3Cu–Ti–Nb austenitic stainless steel for boiler tube application’, Proc. 9th Liege Conf. on ‘Materials for advanced power engineering’, (ed. Lecomte-Beckers J et al.), 95–104; 2010, Liége. Schriften des Forschungszentrum Julich, Reihe energietechnik/Energy Technology Forschungszentrum Julich.
48. Masuyama F: ‘Landolt–Börnstein: numerical data and functional relationships in science and technology’, in ‘Group VIII: advanced materials and technologies’, (ed. Yagi K et al.), Vol. 2, 275–278; 2004, Berlin, Springer-Verlag.
49. Raghavan A · Metall. Trans. A · 1992 · 23 · 245510.1007/BF02658049 ↗
50. Hughes H · J. Iron Steel Inst. · 1967 · 205 · 775
51. Tohyama A and Minami Y: in ‘Advanced heat resistant steels for power generation’, (ed. Viswanathan R and Nutting J), 494–506; 1999, London, IOM Communications Ltd.
52. Robinson PW and Jack DH: in ‘New developments in stainless steel technology’, (ed. Lula R), 71–76; 1985, Metals Park, OH, American Society for Metals.
53. Gerlach VH · Arch. Eisenhüttenwes. · 1968 · 39 · 13910.1002/srin.196803501 ↗
54. ‘Quality and properties of NF709 austenitic stainless steel for boiler tubing applications’, Technical report, Nippon Steel Corp., Tokyo, Japan, 1996.
55. 10.1179/msc.1977.11.4.11710.1179/msc.1977.11.4.117 ↗
56. 10.4028/www.scientific.net/KEM.171-174.44510.4028/www.scientific.net/KEM.171-174.445 ↗
57. Sourmail T: ‘Simultaneous precipitation reactions in creep-resistant austenitic stainless steels’, PhD thesis, University of Cambridge, UK, 2002.
58. 10.3724/SP.J.1037.2010.0084410.3724/SP.J.1037.2010.00844 ↗
59. Yu H · World Iron Steel · 2010 · 2 · 61
60. 10.1179/0267083612Z.00000000021810.1179/0267083612Z.000000000218 ↗
61. 10.1179/1743284713Y.000000030910.1179/1743284713Y.0000000309 ↗
62. Muramatsu K: ‘Advanced heat resistant steel for power generation’; 1999, Cambridge, The University Press.
63. Tohyama A, Hayakawa H and Minami Y: ‘Development of high strength steel boiler tube (TEMPALOY AA-1)’, NKK Technical no. 84, 2001.
64. Xie X, Chi C, Yu H, Yu Q, Dong J and Chen M: ‘Structure stability study on fossil power plant advanced heat-resistant steel and alloys in China’, Proc. 6th Int. Conf. on ‘Advances in materials technology for fossil power plants’, August–September 2010, Santa Fe, NM, USA, ASM International, 30–52.10.31399/asm.cp.am-epri-2010p0030 ↗
65. 10.3724/SP.J.1037.2009.0085310.3724/SP.J.1037.2009.00853 ↗
66. 10.1016/j.calphad.2010.01.00110.1016/j.calphad.2010.01.001 ↗
67. 10.1016/j.proeng.2013.03.24810.1016/j.proeng.2013.03.248 ↗
68. Stojan V · Comput. Methods Mater. Sci. · 2012 · 12 · 175
69. Wu Q, Vasudevan VK, Shingledecker JP and Swindeman RW: ‘Microstructural characterization of advanced boiler materials for ultra supercritical coal power plants’, Proc. 4th Int. Conf. on ‘Advances in materials technology for fossil power plants’, Hilton Head, SC, USA, October, 2004, ASM-International, Materials Park, OH, USA, 748–761.10.31399/asm.cp.am-epri-2004p0748 ↗
70. 10.1016/j.ijpvp.2006.09.00810.1016/j.ijpvp.2006.09.008 ↗
71. Jauhiainen P, Yli-Olli S, Nyholm A, Auerkari P and Salonen J: ‘Impact of oxidation on creep life of superheaters and reheaters’, Proc. ECCC Creep Conf., Zurich, Swizerland, DEStech Publications, April 2009, 320–328.
72. Pint BA · Mater. Sci. Technol.
73. 10.1179/095066010X1264689872816510.1179/095066010X12646898728165 ↗
74. Chen G: ‘Superalloy’; 1988, Beijing, Metallurgical Industry Press.
75. 10.1179/1362171813Y.000000015210.1179/1362171813Y.0000000152 ↗
76. Masuyama F: ‘Landolt–Börnstein numerical data and functional relationships in science and technology’, in ‘Group VIII: advanced materials and technologies’, (ed. Yagi K et al.), Vol. 2, 279–282; 2004, Berlin, Springer-Verlag.
77. Semba H, Okada H, Yonemura M and Igarashi M: ‘Creep strength and microstructure in 23Cr–45Ni–7W alloy (HR6W) and Ni-base superalloys for advanced USC boilers’, Proc. 34th MPA Seminar, Stuttgart, Germany, S. Bisinger, MPA Universität Stuttgart; A. Kleinbauer, MPA Universität Stuttgart, October 2008, 14.1–18.
78. Fukuda M: ‘A-USC development project in Japan’, Proc. 8th Int. NIMS-MPA-IfW-Workshop on ‘Advances in high temperature materials for high efficiency power plants’, Tsukuba, Japan, National Institute for Materials Science (NIMS), March 2010, 46–78.
79. 10.1179/1174892408X38309410.1179/1174892408X383094 ↗
80. Sawaragi Y, Hayase Y and Yoshikawa K: ‘Development of an austenitic alloy with high elevated temperature strength and superior corrosion resistance for superheater tubings of ultra super critical boilers’, Proc. Int. Conf. on ‘Stainless steels’, Chiba, Japan, June 1991, ISIJ, 633–635.
81. 10.2355/tetsutohagane1955.71.7_86910.2355/tetsutohagane1955.71.7_869 ↗
82. Abe F, Kern T.U and Viswanathan (eds.) R: in ‘Creep-resistant steels’, 539–572; 2008, Cambridge, Woodhead Publishing Limited.10.1533/9781845694012 ↗
83. Semba H, Okada H and Igarashi M: ‘Creep properties and strengthening mechanisms in 23Cr–45Ni–7W (HR6W) alloy and Ni-base superalloy for 700C A-USC boilers’, Proc. 5th Int. Conf. on ‘Advances in materials technology for fossil power plants’, 2008, EPRI, Florida, USA, 168–184.10.31399/asm.cp.am-epri-2007p0168 ↗
84. Semba H, Igarashi M, Yamadera Y, Iseda A and Sawaragi Y: ‘High temperature strength and microstructure of the 23Cr–43Ni–6W steel for USC boilers’, Report of the 123rd Committee on Heat-Resisting Materials and Alloys, Japan Society for the Promotion of Science, 2003, Vol. 44, 119–127.
85. 10.1016/0022-3697(61)90054-310.1016/0022-3697(61)90054-3 ↗
86. Wagner C · Z. Elektrochem. · 1961 · 65 · 581
87. 10.1002/352760264X10.1002/352760264X ↗
88. Takeyama M: ‘Precipitation behavior of intermetallic compound phase in austenitic steel’, University research grants technology research report 2007, JFE21 Century Foundation, 2008, 89–97.
89. 10.1016/j.ijpvp.2010.03.01110.1016/j.ijpvp.2010.03.011 ↗
90. Viswanathan R, Purgert R, Goodstine S, Tanzosh J, Stanko G, Shingledecker JP and Vitalis B: ‘U.S. program on materials technology for ultrasupercritical coal-fired boilers’, Proc. 5th Int. Conf. on ‘Advances in materials technology for fossil power plants’, Materials Park, OH, USA, 2008, ASM International. October 3–5, 2007, paper no. 05226G.
91. Tamura M · Tetsu-to-Hagane · 1985 · 71 · S1290
92. Igarashi M, Semba H, Yonemura M, Hamaguchi T, Okada H, Yoshizawa M and Iseda A: ‘Advanced in materials technology for A-USC power plant boilers’, Proc. 6th Int. Conf. on ‘Advances in materials technology for fossil power plants’, August–September 2010, Santa Fe, NM, USA, ASM International, 72–85.10.31399/asm.cp.am-epri-2010p0072 ↗
93. 10.1016/j.matlet.2013.07.06010.1016/j.matlet.2013.07.060 ↗
94. 10.1016/j.proeng.2013.03.24710.1016/j.proeng.2013.03.247 ↗
95. Tanaka Y, Komai N and Suganuma H: ‘Coal ash corrosion properties of Ni-based alloy for advanced-USC boilers’, Proc. 6th Int. Conf. on ‘Advances in materials technology for fossil power plants’, August–September 2010, Santa Fe, NM, USA, ASM International, 303–311.10.31399/asm.cp.am-epri-2010p0303 ↗
96. 10.1179/1743284712Y.000000015110.1179/1743284712Y.0000000151 ↗
97. 10.1016/j.msea.2009.12.03910.1016/j.msea.2009.12.039 ↗
98. 10.1179/174892408X38286010.1179/174892408X382860 ↗
99. Ishituska T · Jpn Soc. Mech. Eng. · 2002 · 45 · 110
100. Ishitsuka T, Mimura H, Morimoto H, Matsumoto M, Nagashima K, Mizumoto M and Okamoto J: ‘Development of new austenitic stainless steel boiler tube with high strength at elevated temperatures and intergranular corrosion resistance’, Nippon Steel Technical Report no. 90, 2004, 104–108.