journal article·1994-02

Modified theory of rolling texture development in α brass

c. S. Lee, B. J. Duggan

Materials Science and Technology· Volume 10· Issue 2
Publisher page

Abstract

Deformed structures of cold rolled 70–30 brass have been studied using both textural and microstructural techniques to establish the twinning tendencies of different orientations. Extensive studies using transmission electron microscopy showed that there are significant volumes of material with near {110}〈112〉 brass (B) and {110}〈001〉 Goss ( G) orientations formed at intermediate to high strains (65–85% reduction). Neither twins nor shear bands are found in these grains. Two highly significant results are that non-twinned B and G volumes are associated with deformation banding and that there is a considerable volume of material spread between {123}〈634〉 S and {135}〈712〉 B–S. A modified deformation pathway is proposed for brass texture formation which, by including deformation banding, predicts the existence of B, S, and B–S. The failure to include S and B–S orientations in low stacking fault energy texture description is due to the low resolution of 111 pole figures.MST/1831
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metallurgy and Material Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. HU H. · Trans. AIME · 1952 · 194 · 76
2. SMALLMAN R. E. · J. Inst. Met. · 1955 · –1956, 84, 10
3. 10.1080/1478643570824270910.1080/14786435708242709 ↗
4. 10.1016/0001-6160(64)90182-810.1016/0001-6160(64)90182-8 ↗
5. 10.1063/1.173610110.1063/1.1736101 ↗
6. 10.1063/1.173624110.1063/1.1736241 ↗
7. HU H. · Trans. AIME · 1963 · 227 · 627
8. GOODMAN S. R. · Trans. AIME · 1964 · 230 · 1413
9. 10.1016/0001-6160(54)90041-310.1016/0001-6160(54)90041-3 ↗
10. 10.1016/0022-5096(55)90056-910.1016/0022-5096(55)90056-9 ↗
11. HAESSNER F. · Z. Metallkd. · 1963 · 54 · 98
12. WASSERMANN G. · Z. Metallkd. · 1963 · 54 · 61
13. DILLAMORE I. L. · J. Inst. Met. · 1963 · –1964, 92, 193
14. 10.1002/pssb.1968025013310.1002/pssb.19680250133 ↗
15. T. LEFFERS: 'Texture in research and practice', 121; 1969, Berlin, Springer.
16. HU H. · 1965 · 295
17. 10.1179/03063457879043390910.1179/030634578790433909 ↗
18. KOHLHOFF G. D. · 1988 · 183
19. 10.1007/BF0285135710.1007/BF02851357 ↗
20. 10.1179/03071697980327659810.1179/030716979803276598 ↗
21. 10.1016/0001-6160(88)90174-510.1016/0001-6160(88)90174-5 ↗
22. LEE W. B. · Textures Microstruct. · 1988 · 8
23. B. J. DUGGAN and C.S. LEE: in Proc. 10th Rise' Int. Symp. on Metallurgy and Materials Science, 'Materials architecture: the scientific basis for engineering materials', 325; 1989, Roskilde, Denmark, Riso National Laboratory.
24. LEFFERS T. · 1989
25. 10.1016/0001-6160(88)90173-310.1016/0001-6160(88)90173-3 ↗
26. LEFFERS T. · Textures Microstruct. · 1988 · 8
27. AERNOUDT E. · Z. Metallkd. · 1970 · 61 · 128
28. YEUNG w. Y. · 1988 · 467
29. C. Y. CHUNG, B. J. DUGGAN, M. S. BINGLEY, and W. B. HUTCHINSON: in Proc. 8th International Conference on 'Strength of Metals and Alloys', (ed. P. O. Kettunen et al), Vol. 1, 319; 1989, Oxford, Pergamon Press.10.1016/B978-0-08-034804-9.50046-2 ↗
30. 10.1016/0036-9748(77)90113-210.1016/0036-9748(77)90113-2 ↗
31. 10.1016/0001-6160(88)90172-110.1016/0001-6160(88)90172-1 ↗
32. 10.1016/0956-7151(93)90138-I10.1016/0956-7151(93)90138-I ↗
33. C. S. LEE, B. J. DUGGAN, and R. E. SMALLMAN: 'Materials modelling: from theory to technology', 79; 1992, Oxford, Institute of Physics.