Dynamic recrystallisation of D2 and W1 tool steels
Source abstract
Abstract
Hot torsion continuous tests were performed on a high carbon, high chromium cold work die steel (D2) and a water hardenable carbon tool steel (W1) at strain rates of 0·1, 1, and 4 s-1 in the temperature ranges of 900 to 1150°C for D2 and 900 to 1200°C for W1. The stress–strain (σ–ɛ) curves rose to a peak stress σ p , then declined to a steady state value σ ss , typical of dynamic recrystallisation (DRX). The commencement and effective completion (99%) of DRX are obtained from θ–σ and σ–ɛ curves respectively where θ is the strain hardening rate dσ/dɛ. The kinetics of DRX are assumed to follow an Avrami equation whereas the time t ss for 99% DRX is related to σ ss and temperature by a sinh function. The equilibrium recrystallised grain size D s decreases with increase in σ ss and Z, the Zener–Hollomon temperature compensated strain rate. Due to the presence of carbides, which stimulate nucleation, D2 generally has faster DRX kinetics than W1.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. 10.1179/02670830010150819910.1179/026708300101508199 ↗
2. MCQUEEN H. J. · J. Met · 1987 · 39 · 28
3. MCQUEEN H. J. · Mater. Sci. Eng · 1988 · 101 · 149
4. RYAN N. D. · High Temp. Technol · 1990 · 8 · 18510.1080/02619180.1990.11753478 ↗
5. MCQUEEN H. J. · Trans. Japan Inst. Metals · 1968 · 9 · 170
6. MCQUEEN H. J. · Met. Forum (Australia) · 1981 · 4 · 81
7. 10.1179/mst.1986.2.8.84110.1179/mst.1986.2.8.841 ↗
8. 10.1179/cmq.1990.29.2.14710.1179/cmq.1990.29.2.147 ↗
9. 10.1016/0025-5416(86)90267-310.1016/0025-5416(86)90267-3 ↗
10. EVANGELISTA E. · Mater. Sci. Technol · 1987 · 5 · 50
11. 10.1016/0924-0136(90)90005-F10.1016/0924-0136(90)90005-F ↗
12. RYAN N. D. · High Temp. Technol · 1990 · 8 · 2710.1080/02619180.1990.11753454 ↗
13. 10.1016/0924-0136(95)01987-P10.1016/0924-0136(95)01987-P ↗
14. 10.1098/rsta.1978.001010.1098/rsta.1978.0010 ↗
15. W. ROBERTS: in ‘Strength of metals and alloys’, (ed. H. J. McQueen et al), Vol. 3, 1859–1891; 1985, Oxford, Pergamon.10.1016/B978-0-08-031640-6.50016-5 ↗
16. SELLARS C. M. · Met. Forum · 1981 · 4 · 75
17. 10.1007/BF0266489910.1007/BF02664899 ↗
18. 10.1520/JTE10554J10.1520/JTE10554J ↗
19. 10.1179/cmq.1983.22.3.36910.1179/cmq.1983.22.3.369 ↗
20. KAYSER F. · Met. Prog · 1952 · 61 · 79
21. 10.1115/1.344334010.1115/1.3443340 ↗
22. EVANGELISTA E. · Metall. Sci. Technol · 1991 · 9 · 75
23. 10.1179/msc.1979.13.3-4.19510.1179/msc.1979.13.3-4.195 ↗
24. 10.1016/0001-6160(69)90049-210.1016/0001-6160(69)90049-2 ↗
25. ELFMARK J. · Hutn. Listy · 1971 · 26 · 107
26. 10.1179/msc.1979.13.3-4.11810.1179/msc.1979.13.3-4.118 ↗
27. EVANS R. W. · J. Inst. Met · 1971 · 99 · 4
28. 10.1007/BF0264192310.1007/BF02641923 ↗
29. 10.1007/BF0266156310.1007/BF02661563 ↗
30. DOHERTY R. D. · Trans. ASM · 1964 · 57 · 874
31. 10.1007/BF0240306010.1007/BF02403060 ↗
32. JONAS J. J. · Metall. Rev · 1969 · 130 · 110.1179/095066069790138056 ↗
33. 10.1016/0022-5088(72)90123-310.1016/0022-5088(72)90123-3 ↗
34. BARRACLOUGH D. R. · PhD thesis · 1974 · University of S
35. ROSSARD C. · MeM. Sci. Rev. Metall · 1959 · 56 · 28510.1051/metal/195956110285 ↗
36. SAKUI S. · Testu-to-Hagane (J. Iron Steel Inst. Jpn) · 1976 · 62 · 85610.2355/tetsutohagane1955.62.7_856 ↗
37. SAKUI S. · Trans. Iron Steel Inst · 1977 · 17 · 71810.2355/isijinternational1966.17.718 ↗