journal article·2013-07Open access

Analysis of indentation size effect in copper and its alloys

D Chicot, E S Puchi-Cabrera, A Iost, M H Staia, X Decoopman, F Roudet, G Louis

Materials Science and Technology· Volume 29· Issue 7

Abstract

For describing the indentation size effect (ISE), numerous models, which relate the load or hardness to the indent dimensions, have been proposed. Unfortunately, it is still difficult to associate the different parameters involved in such relationships with physical or mechanical properties of the material. This is an unsolved problem since the ISE can be associated with various causes such as workhardening, roughness, piling-up, sinking-in, indenter tip geometry, surface energy, varying composition and crystal anisotropy. For interpreting the change in hardness with indent size, an original approach is proposed on the basis of composite hardness modelling together with the use of a simple model, which allows the determination of the hardness–depth profile. Applied to copper and copper alloys, it is shown that it is possible to determine the maximum hardness value reached at the outer surface of the material and the distance over which both the ISE and the workhardening take place.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Université Lille Nord de France, USTL, LML, CNRS, UMR 8107, F-59650 Villeneuve d'Ascq, France

School of Metallurgical Engineering and Materials Science, Faculty of Engineering, Universidad Central de Venezuela, Postal Address 47885, Los Chaguaramos, Caracas, 1041, Venezuela

Venezuelan National Academy for Engineering and Habitat, Palacio de las Academias, Postal Address 1723, Caracas 1010, Venezuela

Arts et Métiers ParisTech – Centre de Lille, 8, Boulevard Louis XIV, 59000 Lille Cedex, France

EMDouai, MPE-GCE, F-59500 Douai, France

References (56)

Show source-provided references
1. 10.1179/1743284711Y.000000012710.1179/1743284711Y.0000000127 ↗
2. 10.1016/j.mser.2004.05.00110.1016/j.mser.2004.05.001 ↗
3. Meyer E · Z. Ver. deutscher Ing. · 1908 · 52 · 645
4. Kick F: ‘Das Gestez der proportionalen Widerstande und seine Anwendung’; 1885, Delidzig, Felix.
5. Li H · J. Mater. Res. · 1993 · 28 · 917
6. 10.1016/S0254-0584(02)00086-X10.1016/S0254-0584(02)00086-X ↗
7. 10.1080/0950083890820635610.1080/09500838908206356 ↗
8. 10.1016/S0022-5096(97)00086-010.1016/S0022-5096(97)00086-0 ↗
9. 10.1179/1743284712Y.000000005310.1179/1743284712Y.0000000053 ↗
10. 10.1115/1.322572510.1115/1.3225725 ↗
11. 10.1016/S0167-6636(02)00205-310.1016/S0167-6636(02)00205-3 ↗
12. 10.1016/B978-012443341-0/50031-410.1016/B978-012443341-0/50031-4 ↗
13. 10.1016/0022-5096(70)90029-310.1016/0022-5096(70)90029-3 ↗
14. 10.1179/1743284712Y.000000004010.1179/1743284712Y.0000000040 ↗
15. 10.1016/j.msec.2006.09.03110.1016/j.msec.2006.09.031 ↗
16. 10.1016/j.actamat.2005.07.00110.1016/j.actamat.2005.07.001 ↗
17. 10.1002/crat.217024022610.1002/crat.2170240226 ↗
18. Johnson DW, Vogel EM, Hate BB: Proc. 3rd Int. Conf. on ‘Ferrites’, (ed. , Watanabe H, ed), 285; 1980, Tokyo, Centre for Academic Publications.
19. 10.1007/BF0173025710.1007/BF01730257 ↗
20. 10.1007/BF0114875910.1007/BF01148759 ↗
21. 10.1007/BF0072015810.1007/BF00720158 ↗
22. 10.1016/0043-1648(95)06681-010.1016/0043-1648(95)06681-0 ↗
23. 10.1002/crat.217031061710.1002/crat.2170310617 ↗
24. 10.1016/S0254-0584(02)00544-810.1016/S0254-0584(02)00544-8 ↗
25. 10.1179/026708306X8154010.1179/026708306X81540 ↗
26. 10.1002/crat.217018091910.1002/crat.2170180919 ↗
27. 10.1007/BF0057676510.1007/BF00576765 ↗
28. 10.1002/crat.217032040710.1002/crat.2170320407 ↗
29. 10.1016/j.actamat.2006.06.04010.1016/j.actamat.2006.06.040 ↗
30. 10.1016/j.actamat.2006.09.00410.1016/j.actamat.2006.09.004 ↗
31. 10.1016/j.mechrescom.2010.02.00110.1016/j.mechrescom.2010.02.001 ↗
32. Voyiadjis GZ · ASCE · 2011 · 1 · 24
33. 10.1016/j.mechmat.2011.07.00210.1016/j.mechmat.2011.07.002 ↗
34. 10.6028/jres.107.02310.6028/jres.107.023 ↗
35. 10.1016/j.surfcoat.2005.03.01810.1016/j.surfcoat.2005.03.018 ↗
36. 10.1016/j.matchemphys.2009.07.03310.1016/j.matchemphys.2009.07.033 ↗
37. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
38. 10.1016/j.ijsolstr.2005.02.04810.1016/j.ijsolstr.2005.02.048 ↗
39. 10.1557/JMR.1999.030610.1557/JMR.1999.0306 ↗
40. Field JE, Telling RH: ‘The Young modulus and Poisson ratio of diamond’, Research Note; 1999, Cambridge, Cavendish Laboratory.
41. 10.1016/j.matlet.2003.09.02610.1016/j.matlet.2003.09.026 ↗
42. 10.1557/JMR.2005.009910.1557/JMR.2005.0099 ↗
43. 10.1016/j.diamond.2011.10.00410.1016/j.diamond.2011.10.004 ↗
44. 10.1080/0022234990824813110.1080/00222349908248131 ↗
45. Vingsbo O, Hogmark S, Jönsson B, Ingemarsson A: in ‘Microindentation techniques in materials science and engineering’, (ed. , Blau P J, Lawn B R), ASTM STP 889, Chapter 15, 257–271; 1986, Philadelphia, PA, ASTM.10.1520/STP32963S ↗
46. 10.1007/BF0036076410.1007/BF00360764 ↗
47. 10.1016/j.ijplas.2003.10.00710.1016/j.ijplas.2003.10.007 ↗
48. 10.1016/j.msea.2008.09.04010.1016/j.msea.2008.09.040 ↗
49. 10.1016/0040-6090(84)90123-810.1016/0040-6090(84)90123-8 ↗
50. 10.1016/S0257-8972(97)00522-710.1016/S0257-8972(97)00522-7 ↗
51. 10.1016/S0257-8972(02)00394-810.1016/S0257-8972(02)00394-8 ↗
52. 10.1179/02670840422501640910.1179/026708404225016409 ↗
53. 10.1016/0257-8972(95)02697-510.1016/0257-8972(95)02697-5 ↗
54. 10.1016/j.tsf.2009.07.17810.1016/j.tsf.2009.07.178 ↗
55. 10.1016/S0257-8972(00)01116-610.1016/S0257-8972(00)01116-6 ↗
56. Samuels LE: ‘Metallographic polishing by mechanical methods’; 1982, Metals Park, OH, ASM International.