journal article·2015-03

Investigation of creep damage in advanced martensitic chromium steel weldments using synchrotron X-ray micro-tomography and EBSD

C. Schlacher, T. Pelzmann, C. Béal, C. Sommitsch, C. Gupta, H. Toda, P. Mayr

Materials Science and Technology· Volume 31· Issue 5
Publisher page

Abstract

In recent years, a design concept for the stabilisation of the microstructure by addition of boron and nitrogen was developed. This so called martensitic boron–nitrogen strengthened steel (MARBN) combines boron strengthening by solid solution with precipitation strengthening by finely dispersed nitrides. Welded joints of MARBN steels showed no formation of a uniform fine grained region in the heat affected zone (HAZ) which is in general highly susceptible to Type IV cracking. In this work, the crossweld creep strength of a newly developed MARBN steel was analysed and the evolution of damage was investigated using synchrotron microtomography supported by electron microscopy. Three-dimensional (3D) reconstructions of the tested samples together with electron backscatter diffraction investigations revealed an intense void formation in a restricted area along small grains at prior austenite grain boundaries in the HAZ as the main reason for premature creep failures in the HAZ of welded joints.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Materials Science and Welding, Graz University of Technology, Graz, Austria

Mechanical Metallurgy Division, Materials Group, Bhabha Atomic Research Centre Mumbai, India

Department of Mechanical Engineering, Kyushu University, Fukuoka, Japan

Institute of Joining and Assembly, Technische Universität Chemnitz, Chemnitz, Germany

References (32)

Show source-provided references
1. IEA: ‘World energy outlook’; 2008, Paris, OECD Publishing.
2. 10.1179/1362171813Y.000000015210.1179/1362171813Y.0000000152 ↗
3. Bhadeshia HKDH: ‘Design of ferritic creep-resistant steels’, 2001, 41, (6), 626–640.10.2355/isijinternational.41.626 ↗
4. 10.1179/174328406X14877810.1179/174328406X148778 ↗
5. Cerjak H: ‘The role of welding in the power generation industry’, Proc. IIW Int. Conf. on ‘Safety and reliability of welded components in energy and processing industry’, Graz, Austria, July 2008, IIW, 17–27.
6. 10.1007/s11661-013-1801-010.1007/s11661-013-1801-0 ↗
7. Abe F · Energy Mater. Mater. Sci. Eng. Energy Syst. · 2012 · 4 · 16610.1179/174892312X13269692038851 ↗
8. 10.1016/j.proeng.2011.04.01810.1016/j.proeng.2011.04.018 ↗
9. 10.1016/j.ijpvp.2006.09.01310.1016/j.ijpvp.2006.09.013 ↗
10. 10.1016/j.ijpvp.2010.08.00510.1016/j.ijpvp.2010.08.005 ↗
11. Mayr P: ‘Evolution of microstructure and mechanical properties of the heat affected zone in B-containing 9% chromium steels’, PhD thesis, Graz University of Technology, Styria, Austria, 2007.
12. Mayr P, Schlacher C and Mitsche S: ‘Critical issues with creep-exposed ferritic-martensitic welded joints for thermal power plants, Proc. IIW Int. Conf. on ‘Global trends in joining, cutting and surfacing technology’, 417–425; 2011, Alpha Science Intl Ltd. Oxford, UK.
13. Abe F, Tabuchi M, Semba H, Igarashi M, Yoshizawa M, Komai N and Fujita A: ‘Feasibility of MARBN steel for application to thick section boiler components in USC power plant at 650°C’, in ‘Advances in materials technology for fossil power plants: Proceedings from the 5th Int. Conf.’, 92–106; 2007, Materials Park, OH, ASM International.10.31399/asm.cp.am-epri-2007p0092 ↗
14. Abe F: ‘Metallurgy for long-term stabilization of ferritic steels for thick section boiler components in USC power plant at 650°C’, in ‘Materials for advanced power engineering 2006: Proceedings of the 8th Liège conference’, 965–980; 2006, Julich, Energy Technology Forschungszentrum Julich.
15. 10.1088/1468-6996/9/1/01300210.1088/1468-6996/9/1/013002 ↗
16. 10.1007/s11661-005-0306-x10.1007/s11661-005-0306-x ↗
17. 10.1179/174329306X8926010.1179/174329306X89260 ↗
18. 10.1179/136217109X1250593258485310.1179/136217109X12505932584853 ↗
19. 10.2355/isijinternational.42.Suppl_S6710.2355/isijinternational.42.Suppl_S67 ↗
20. 10.1179/174328008X27780310.1179/174328008X277803 ↗
21. 10.1016/j.msea.2012.12.00210.1016/j.msea.2012.12.002 ↗
22. 10.1016/j.msea.2009.11.05810.1016/j.msea.2009.11.058 ↗
23. Schlacher C, Sommitsch C, Gupta C, Toda H, Uesugi K, Suzuki Y and Mayr P: ‘Creep and damage investigation of improved 9% Cr steel welded joints’, in ‘Trends in welding research 2012: Proceedings of the 9th international conference’, 376–381; 2013, Materials Park, OH, ASM International.
24. Mayr P, Holzer I and Mendez-Martin F: ‘Experience with 9Cr3W3CoVNbBN Base Material and Crosswelds at 650 C for Implementation in USC Power Plants’, Proc. 3rd Symp. on ‘Heat resistant steels and alloys for high efficiency USC power plants’, Tsukuba, Japan, June 2009, National Insititute for Materials Science.
25. 10.2355/isijinternational.52.51610.2355/isijinternational.52.516 ↗
26. ‘NIMS Creep Data sheet no. 48A’, Tsukuba, Japan, 2012.
27. Abe F, Tabuchi M, Tsukamoto S and Liu Y: ‘Alloy design of tempered martensitic 9Cr-boron steel for A-USC boilers’, in ‘Advances in materials technology for fossil power plants: Proceedings from the Seventh International Conference’, 1127–1138; 2014, Materials Park, OH, ASM International.10.31399/asm.cp.am-epri-2013p1127 ↗
28. 10.1038/nmeth.208910.1038/nmeth.2089 ↗
29. 10.1002/9783527621927.ch1710.1002/9783527621927.ch17 ↗
30. Lyckegaard A: ‘Development of tomographic reconstruction methods in materials science with focus on advanced scanning methods’, Technical University of Denmark, Denmark, 2011.
31. Lyckegaard A · Int. J. Tomogr. Stat. · 2010 · 18 · 1
32. Tsukamoto S, Liu Y, Shirane T, Tabuchi M and Abe F: ‘Improvement of microstructure stability during creep in high Cr ferritic heat resistant steel HAZ mechanism of type IV failure’, in ‘Trends in welding research 2012: Proceedings of the 9th international conference’, 1–10; 2013, Materials Park, OH, ASM International.