Influence of heat treatment and particle shape on mechanical properties of infiltrated Al 2 O 3 particle reinforced Al-2 wt-%Cu
Source abstract
Abstract
Al-2 wt-%Cu composites were produced by gas pressure infiltration of powder beds with a high volume fraction (45 to 60 vol.-%) of angular or polygonal alumina particles. The tensile behaviour and fracture toughness of the composites were characterised in as cast, solutionised and peak aged (T6) conditions. It was shown that coarse intermetallics that are formed during solidification and located preferentially at the particle/matrix interface lead to lower toughness compared with the same composites in solutionised and T6 conditions. The particle nature and shape exert a strong influence on the properties of the composites: polygonal particles are intrinsically stronger than angular particles and yield stronger, tougher, and more ductile composites. Composite toughness variations are explained in terms of fracture micromechanisms.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. BOYD J. D. and LLOYD D. J.: in ‘Comprehensive composite materials’ Vol. 3 ‘Metal matrix composites’ (ed. Clyne T. W.) 139–149; 2000 Oxford Pergamon.10.1016/B0-08-042993-9/00007-3 ↗
2. KOUZELI M. WEBER L. MARCH C. S. ROSSOLL A. and MORTENSEN A.: in ‘Advances in mechanical behaviour plasticity and damage’ (ed. Miannay D. et al) 729-734; 2000 Tours Elsevier.
3. KOUZELI M.: ‘Tensile behaviour of aluminium reinforced with ceramic particles’ PhD thesis N°2348 EPFL Lausanne 2001.
4. MISEREZ A. ROSSOLL A. MARCH C. S. WEBER L. and MORTENSEN A.: in ‘Advances in mechanical behaviour plasticity and damage’ (ed. Miannay D. et al) 723-728; 2000 Tours Elsevier.
5. MISEREZ A.PhD thesis to be published.
6. MARCH C. SAN et al.: ‘ICETS 2000-Session 3: Advanced materials conference’ (ed. Song J. and Yin R.) 74-82; 2000 Beijing New World Press.
7. MORTENSEN A.: in ‘Comprehensive composite materials’ Vol. 3 ‘Metal matrix composites’ (ed. Clyne T. W.) 521 —554; 2000 Oxford Pergamon.10.1016/B0-08-042993-9/00019-X ↗
8. GARCIACORDOVILLA C. LOUIS E. and NARCISO J.: Acta Mater. 1999 47 4461 — 4479.10.1016/S1359-6454(99)00318-3 ↗
9. KOUZELI M. WEBER L. MARCH C. S. and MORTENSEN A.: Acta Mater. 2001 49 3699–3709.10.1016/S1359-6454(01)00279-8 ↗
10. BOOT1EBY R. M. and C. A. HIPPSLEY: Mater. Sci. Technol. 1994 10 565–571.10.1179/mst.1994.10.6.565 ↗
11. 10.1016/S0013-7944(98)00062-910.1016/S0013-7944(98)00062-9 ↗
12. 10.1016/S0013-7944(00)00061-810.1016/S0013-7944(00)00061-8 ↗
13. G. PETZOW AND G. EFFENBERG (eds.): ‘Ternary alloys’ Vol. 4 475 — 489; 1991 Weinheim VC H Verlagsgesellschaft.
14. COUTURE A.: AFS Int. Cast Met. J., 1981, 6, 9–17.
15. KAMAT S. V., , ROLLET A. D., , and HIRTH J. P.: Scr. MetalL Mater., 1991, 25, 27 — 32.
16. 10.1016/0956-716X(91)90345-210.1016/0956-716X(91)90345-2 ↗
17. MUMMERY P., and DERBY B.: Mater. Sci. Eng., 1991, A135, 221 — 224.
18. PRANGNELL P. B. DOWNES T. STOBBS W. M. and WITHERS P. J.: Acta MetalL Mater. 1994 42 3425 — 3436.10.1016/0956-7151(94)90475-8 ↗
19. KOUZELI M. WEBER L. MARCH C. S. and MORTENSEN A.: Acta Mater. 2001 49 497 — 505.10.1016/S1359-6454(00)00334-7 ↗
20. WALLIN K., , SAARIO T., , and TORRONEN K.: Int. J. Fract., 1987, 32, 201 —209.
21. 10.1023/A:100461082351110.1023/A:1004610823511 ↗
22. RUNT W. H.: in ‘Comprehensive composite materials’ Vol. 3 ‘Metal matrix composites’ (ed. Clyne T. W.) 701 —715; 2000 Oxford Pergamon.
23. 10.1007/BF0259546510.1007/BF02595465 ↗
24. QIN S., , CHEN C., , ZHANG G., , WANG W., , and WANG Z.: Mater. Sci. Eng. A, 1999, A27Z 363–370.
25. CHEN C. R., , QIN S. Y., , LI S. X., , and WEN J. L.: Mater. Sci. Eng., 2000, A278, 96 — 105.
26. ONODERA R., , ERA H., , ISHIBASH T., , and SHIMIZU M.: Acta Metall, 1983, 31, 1589-1593.
27. LEBYDOKIN M. BRECHET Y. ESTRIN Y. and KUBIN L.: Acta Mater. 1996 44 4531 —4541.10.1016/1359-6454(96)00076-6 ↗
28. 10.1016/S1359-6462(97)00571-X10.1016/S1359-6462(97)00571-X ↗
29. 10.1016/S1359-6462(00)00474-710.1016/S1359-6462(00)00474-7 ↗
30. THEVENET D., , MLIHATOUATI M., , and ZEGHLOUL A.: Mater. Sci. Eng. A, 1999, A266, 175 — 182.
31. 10.1016/0001-6160(84)90129-910.1016/0001-6160(84)90129-9 ↗
32. 10.1016/0956-716X(93)90100-710.1016/0956-716X(93)90100-7 ↗
33. HAHNER P.: Acta Mater. 1997 45 3695 — 3707.10.1016/S1359-6454(97)00066-9 ↗
34. BARKER L. M.: in ‘chevron-notched specimens: testing and stress analysis’ STP855 (ed. Underwood J. H. et al.) 117 — 133; 1983 Philadelphia PA ASTM.10.1520/STP32725S ↗
35. TSCHANZ T. C. MATLOCK D. K. and KRAUSS G.: in ‘Chevron-notch fracture test experience: metals and non-metals’ (ed. Brown K. R. and Baratta F. I.) 26-42; 1991 Philadelphia PA ASTM.10.1520/STP24708S ↗
36. BRAY J. W.: in ‘Chevron-notch fracture test experience: metals and non-metals’ STP1172 (ed. Brown K. R. and Baratta F. I.) 131-143; 1991 Philadelphia PA ASTM.10.1520/STP24715S ↗
37. 10.1111/j.1460-2695.1994.tb00227.x10.1111/j.1460-2695.1994.tb00227.x ↗
38. RICE J. R.: Proc 3rd Int. Conf. on ‘Fracture’ (ed. Yokobori T. et al) 309-340; 1965 Sendai Japanese Society for Strength and Fracture of Metals.
39. GEBERICH W. W.: in ‘Fracture: interactions of microstructure mechanisms and mechanics’ (ed. Wells J. M. and Landes J. D.) 49 — 74; 1984 Warrendale PA TMS.
40. HIRTH J. P. and FROES F. H.: MetalL Trans. 1977 8A 1165 — 1176.10.1007/BF02667402 ↗
41. MORTENSEN A.: in ‘Fabrication of particulates reinforced metal composites’ (ed. Masounave J. and Hamel F. H.) 217 — 233; 1990 Materials Park OH ASM International.
42. JoxL M. L., , VITEK V., , and MCMAHON C. J.: Acta Metall, 1980, 28, 1479 — 1488.
43. HUTCHINSON J. W. and EVANS A. G.: Acta Mater. 2000 48 125 — 135.10.1016/S1359-6454(99)00291-8 ↗
44. TVERGAARD V., and HUTCHINSON J. W.: J. Mech. Phys. Solids, 1992, 40, 1377 — 1397.
45. TVERGAARD V.: Proc. IUTAM Symp. on ‘Nonlinear analysis of fracture’ (ed. Willis J. R.); 1997 Dordrecht Kluwer Academic Publishers.
46. 10.1016/0013-7944(80)90056-910.1016/0013-7944(80)90056-9 ↗
47. STUWE H. P.: in ‘Three-dimensional constitutive relations and ductile fracture’ (ed. S. Nemat-Nasser) 213 — 221; 1981 Dourdan N-H Publishing.
48. SIGL L. S., and FISCHMEISTER H. F.: Acta Metall, 1988, 36, 887 — 897.
49. 10.1179/imr.1994.39.1.110.1179/imr.1994.39.1.1 ↗
50. HUNT W. H.: in ‘Intrinsic and extrinsic fracture mechanisms in inorganic composite systems’ (ed. Lewandowski J. J. and Hunt W. H.) 31-38; 1995 Warrendale PA TMS.
51. 10.1007/s11661-998-0326-410.1007/s11661-998-0326-4 ↗
52. 10.1007/BF0035641510.1007/BF00356415 ↗
53. PESTES R. H., , KAMAT S. V., , and HIRTH J. P.: Mater. Sci. Eng., 1994, A189, 9–14.
54. LEWANDOWSKI J. J.: in ‘Comprehensive composite materials’ Vol. 3 ‘Metal matrix composites’ (ed. Clyne T. W.) 151–187; 2000 Oxford Pergamon.10.1016/B0-08-042993-9/00008-5 ↗