Effect of dynamic strain aging on fatigue crack growth behaviour of reactor pressure vessel steels
Source abstract
Abstract
Fatigue tests under constant amplitude load were conducted on compact tension specimens of SA533B3 steels with four levels of sulphur content at different temperatures. A modified capacitance type crack opening displacement (COD) gauge was shown to be suitable for fatigue crack length measurement at high temperatures. Test results obtained with different measurement techniques show good consistency. The observation that the Young's moduli measured at a strain rate of 4 × 10−3 s−1 for the SA533B3 steels at 150 and 300°C do not decrease with increasing temperature seems to be related to the presence of dynamic strain aging. The fatigue crack growth rates at 150 and 300°C are about two and half times slower than those tested at 400°C because dynamic strain aging prevails at 150 and 300°C. Fractographic examination results suggest that inclusions embedded in secondary cracks enhanced the fatigue crack initiation rather than the fatigue crack growth.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Ultrasonics and Acoustic Wave Propagation · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Shah V. N., and Macdonald P. E. ‘Aging and life extension of major light water reactor components’, 24, 617; 1993, Amsterdam, Elsevier Science Publishers.
2. Huang J. Y., Li R. Z., Chien K. F., Kuo R. C., Liaw P. K., Yang B., and Huang J. G.: in ‘Fatigue and fracture mechanics’, (ed.Chona R.), Vol. 32, STP 1406, 105-121; 2001, Philadelphia, PA, ASTM.10.1520/STP10586S ↗
3. Huang J. Y., Chen C. Y., Chien K. F., Kuo R. C., Liaw P. K., and Huang J. G.: Proc. Julia Weertman Symp. TMS Fall Meeting, Cincinnati, OH, USA, October—November 1999, TMS,373–384.
4. Nakajima H., Nakajima N., and Kondo T.: Proc. Symp. on ‘Nuclear power plant life extension’, 81-93; 1987, Paris, France, OECD Nuclear Energy Agency.
5. Yang B., Liaw P. K., Huang J. Y., Kuo R. C., and Huang J. G.: Mater. Set Eng. A, 2001, A314,131–139.10.1016/S0921-5093(00)01910-9 ↗
6. 10.1016/S1359-6462(99)00358-910.1016/S1359-6462(99)00358-9 ↗
7. 10.1007/s11661-004-0104-x10.1007/s11661-004-0104-x ↗
8. 10.1023/A:102181721651910.1023/A:1021817216519 ↗
9. Van W. A., Sluys Der, and Emanuelson R. H.: Proc. 2nd Int. Symp. on ‘Environmental degradation of materials in nuclear power systems - water reactors’, (ed. J. T. A. Roberts), Monterrey, CA, 1985, American Nuclear Society,100–107.
10. Amzallag C., Bernard J. L., and Slama G.: Proc. Int. Symp. on ‘Environmental degradation of materials in nuclear power systems - water reactors’, (ed. Roberts J. T. A.), 727–745; 1983, Myrtle Beach, SC, 1983, NACE, 727–745.
11. Klesnil M., and Lukag P. ‘Fatigue of Metallic Materials’, 131; 1980, Amsterdam, Elservier Scientific.
12. Van W. A., Sluys Der, and Cullen W. H.: in ‘Performance and evaluation of light water reactor pressure vessels’, (ed.Rungta R. et al), PVP-119, 63–71; 1987, San Diego, CA, ASME.
13. O'Donnell T. P., and O'Donnell W. J.: in ‘Performance and evaluation of light water reactor pressure vessels’, (ed.Yukawa S.), PVP-306, 59-69; 1995, Honolulu, HI, ASME.
14. Stahlkopf K. E., Gilman J. D., and Marstan T. U.: in ‘Performance and evaluation of light water reactor pressure vessels’, (ed.Rungta R. et al), PVP-119, 1-7; 1987, San Diego, CA, ASME.
15. 10.1080/18811248.1989.973427710.1080/18811248.1989.9734277 ↗
16. Chopra O. K., and Shack W. J. ‘Effects of LWR coolant environments on fatigue design curves of carbon and low-alloy steels’, NUREG/CR-6583, ANL-97/18, US Nuclear Regulation Commission, Washington, DC, USA, 1998.10.2172/573404 ↗
17. Atkinson J. D., and Forrest J. E.: Proc. 2nd Int. Atomic Energy Agency Specialists’ Meeting on ‘Subcritical crack growth’, (ed.Cullen W. H.), Vol. 2, NUREG/CP-0067, 153-178; 1985, Sendai, Japan, US Nuclear Regulation Commission.
18. Shoji T., Komai K., Abe S., and Nakajima H.: Proc. 2nd Int. Atomic Energy Agency Specialists’ Meeting on ‘Subcritical crack growth’, (ed.Cullen W. H.), Vol. 2, NUREG/CP-0067, 99-105; 1985, Sendai, Japan, US Nuclear Regulation Commission.
19. Soulat P., Petrequin P., and Houssin B.: in ‘Radiation embrittle-ment and surveillance of nuclear reactor pressure vessels’, (ed.Steele L. E.), STP 819, 64-85; 1983, Philadelphia, PA, ASTM.10.1520/STP31848S ↗
20. 10.1016/0022-3115(95)00092-510.1016/0022-3115(95)00092-5 ↗
21. 10.1179/msc.1977.11.8-9.32110.1179/msc.1977.11.8-9.321 ↗
22. 10.1016/0001-6160(70)90110-010.1016/0001-6160(70)90110-0 ↗
23. 10.1016/0001-6160(73)90076-X10.1016/0001-6160(73)90076-X ↗
24. 10.1016/0001-6160(65)90002-710.1016/0001-6160(65)90002-7 ↗
25. 10.1179/02670830322500794210.1179/026708303225007942 ↗
26. 10.1016/j.jnucmat.2003.09.00910.1016/j.jnucmat.2003.09.009 ↗
27. Connolly M. P.: in ‘Special applications and advanced techniques for crack size determination’, (ed.Ruschau J. J., and Donald J. K.), STP 1251, 3-16; 1995, Philadelphia, PA, ASTM.
28. Dai Y., Marchand N. J., and Hongoh M.: in ‘Special applications and advanced techniques for crack size determination’, (ed.Ruschau J. J., and Donald J. K.), STP 1251, 17-32; 1995, Philadelphia, PA, ASTM.10.1520/STP14675S ↗
29. McEvily A. J. ‘Advances in quantative measurement of physical damage’, STP 811, 283–312; 1983, Philadelphia, PA, ASTM.10.1520/STP30562S ↗
30. Courtney T. H. ‘Mechanical behavior of materials’, 2nd edn, 56; 2000, Taipei, McGraw-Hill Book Co.
31. Gabetta G., and Törrönen K.: Proc. 2nd International Atomic Energy Agency Specialists’ Meeting on ‘Subcritical crack growth’, NUREG/CP-0067,Vol. 2, 131; 1985, Sendai, Japan, US Nuclear Regulation Commission.
32. 10.1111/j.1460-2695.1987.tb00487.x10.1111/j.1460-2695.1987.tb00487.x ↗
33. 10.1016/j.jnucmat.2004.03.00410.1016/j.jnucmat.2004.03.004 ↗
34. 10.1007/s11661-004-0256-810.1007/s11661-004-0256-8 ↗
35. Leslie W. C. ‘The physical metallurgy of steels’, 180; New York, McGraw-Hill.
36. Baker T. J.: in ‘Sulfide inclusions in steel’, (ed.deBarbadillo J. J., and Snape E.), 135-158; 1977, Metals Park, OH, ASM.