Effect of Nb on dynamic strain induced austenite to ferrite transformation
Source abstract
Abstract
Dynamic strain induced transformation (DSIT) is an interesting processing route to obtain ultrafine ferrite grains. In the present work, the effect of Nb on DSIT was investigated. Samples of low C–Mn steels, with and without Nb, were intensively deformed in hot torsion, aiming at the production of ultrafine ferrite grains. After soaking at 1200°C, the samples were cooled to 1100°C, submitted to hot torsion deformation to decrease the grain size and then cooled to 900, 850 or 800°C for further hot torsion deformation. In the steel without Nb, recrystallisation took place before enough deformation could be accumulated to induce ferrite formation, so DSIT would only take place at the lowest temperature investigated, 800°C. In the Nb steel, Nb addition delayed austenite recrystallisation, allowing DSIT ferrite to form at higher temperature than in the steel without Nb, 850°C.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Electromagnetic Effects on Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Valiev R. Z., Korznikov A. V., and Mulyukov R. R.: Mater. Sci. Eng. A, 1993, A168, (2),141–148.10.1016/0921-5093(93)90717-S ↗
2. 10.1016/S1359-6454(98)00365-610.1016/S1359-6454(98)00365-6 ↗
3. Ueji R., Tsuji N., Saito Y., and Minamino Y.: Proc. Conf. ISUGS 2001, Fukuoka, Japan, September 2001, ISIJ,222–225.
4. 10.1007/s11661-002-0283-210.1007/s11661-002-0283-2 ↗
5. 10.1016/S0921-5093(02)00519-110.1016/S0921-5093(02)00519-1 ↗
6. 10.1016/j.msea.2005.04.02610.1016/j.msea.2005.04.026 ↗
7. Yada H., Matsumura Y., and Senuma T.: Proc. Int. Conf. on ‘Physical metallurgy of thermomechanical processing of steels and other metals’, (ed.Tamura I.), 200–207; 1988, Tokyo, ISIJ.
8. Beladi H. · Mater. Sci. Eng. A · 2003 · 376 · 152
9. 10.2355/isijinternational.43.74610.2355/isijinternational.43.746 ↗
10. 10.2355/isijinternational.43.76110.2355/isijinternational.43.761 ↗
11. 10.2355/isijinternational.43.39410.2355/isijinternational.43.394 ↗
12. 10.1016/S0921-5093(03)00071-610.1016/S0921-5093(03)00071-6 ↗
13. Shokouhi A., and Hodgson P. D.: Proc. Joint Int. Conf. HSLA Steels 2005 and ISGUS 2005, Sanya, China, November 2005, CSM,1114–1119.
14. 10.1016/j.scriptamat.2005.11.02610.1016/j.scriptamat.2005.11.026 ↗
15. 10.1016/j.cossms.2006.02.01410.1016/j.cossms.2006.02.014 ↗
16. Ferreira J. L.: Avaliação de Mecanismos de Refino de Grão para Obtenção de Granulação Ultrafina em Avos C—Mn e C—Mn—Nb’, Master thesis, Federal Fluminense University, Rio de Janeiro, Brazil, 2006.
17. Semiatin S. L., Lahoti G., and Jonas J. J.: in ‘ASM metals handbook’, 9th edn,Vol. 8, ‘Mechanical testing’, 154-184; 1985, Metals Park, OH, ASM International.
18. 10.2355/isijinternational.38.30010.2355/isijinternational.38.300 ↗
19. Agren J. · A · 1979 · 10 · 1847
20. 10.2355/isijinternational.31.27810.2355/isijinternational.31.278 ↗
21. 10.2355/isijinternational.35.152310.2355/isijinternational.35.1523 ↗
22. Beladi H. · Mater. Sci. Technol · 2004 · 20 · 1538
23. 10.1016/j.msea.2005.07.04710.1016/j.msea.2005.07.047 ↗