Diffusion bonding between high chromium white iron and low carbon steel
Source abstract
Abstract
In the present study, a high chromium white iron was diffusion bonded to a low carbon steel. The effects of bonding temperature and holding time at the reached temperature on microstructural developments across the joint region were investigated. After diffusion bonding, microstructural analysis including metallographical examination, energy dispersive X-ray (EDX), wavelength dispersive X-ray (WDX), microhardness measurements and shear strength tests were performed. The results showed that bonding temperature with holding time was effective on the width of the diffusion zone that affected the shear strength of the bonds. As a result, from the microstructural observations, EDX and WDX analysis, microhardness measurements and shear strength tests, it was concluded that a high temperature with a long holding time must be used in the diffusion bonding of high chromium white cast irons to low carbon steels.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Schwartz M. M., and Paulonis D. F. ‘Welding handbook’,Vol. 3, 311-317; 1980, Miami, FL, American Welding Society.
2. Ghosh M., Chatterjee S., and Mishra B.: Mater. Set Eng. A, 2003, A363,268–274.10.1016/S0921-5093(03)00649-X ↗
3. 10.1016/S1359-6462(98)00037-210.1016/S1359-6462(98)00037-2 ↗
4. Mahoney M. W., and Bampton C. C.: in ‘ASM handbook’,Vol. 6, ‘Welding, brazing, and soldering’, 156; 1993, Materials Park, OH, ASM International.10.31399/asm.hb.v06.a0001350 ↗
5. Gundlach R. B., and Doane D. V.: in ‘ASM handbook’,Vol. 4, ‘Heat treating’, 697-708; 1993, Materials Park, OH, ASM International.
6. Sakurai I. · Maedono,K. Matsuo,T. Momono and H. G. Katayamalmono · 1996 · 68 · 43
7. Bushey R. A.: in ‘ASM handbook’,Vol. 6, ‘Welding, brazing, and soldering’, 708; 1993, Materials Park, OH, ASM International.10.31399/asm.hb.v06.a0001435 ↗
8. 10.2355/isijinternational.45.132210.2355/isijinternational.45.1322 ↗
9. 10.1016/j.wear.2005.03.00210.1016/j.wear.2005.03.002 ↗
10. Dwivedi D. K. · Set Teehnol · 2004 · 20 · 1326
11. Orhan N., Aksoy M., and Eroglu M.: Mater. Set Eng. A, 1999, A271,458–468.10.1016/S0921-5093(99)00315-9 ↗
12. Bain E. C., and Paxton H. W. ‘Alloying elements in steel’; 1966, Metals Park, OH, American Society for Metals.