Hardness properties across multiscales of applied loads and material structures
Source abstract
Abstract
Indentation hardness measurements determined from continuous loading tests are compared on a hardness stress–strain basis previously developed to show the relationship of different test results. In such a manner, the elastic, plastic and cracking behaviours are described here for NaCl, oxidiser AP, MgO and explosive RDX crystals. The measurements cover a very large range of impression sizes spread over macro- to nano-scale test results. In addition, connection is made with compiled measurements of applied forces against residual indentation sizes and crack sizes for MgO, RDX and Si crystals also over a very large range of loads and deformations. Loading rate influences are shown for MgO crystal hardness and cracking behaviours, in the latter case relating to indentation fracture mechanics (FM) prediction. For internal structural relationship, first, slip system and dislocation pile-up influences are demonstrated for MgO crystal results. Exceptional subgrain boundary and grain boundary hardness measurements for Nb crystals and Nb and Mo polycrystals are then presented. Such results relate to a Hall–Petch type inverse square root of grain diameter dependencies of hardness shown for the following cases: (i) historical measurements on α -brass; (ii) wide ranging grain size coverage in polycrystal Cr, α -Ti and W materials; and (iii) particle size and binder mean free path dependencies for WC–Co polyphase composites. For the WC–Co system, there is connection with the contiguity parameter for WC to WC particle contacts and to the FM behaviour.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Maryland, College Park, MD 20742, USA
Loyola University Maryland, Baltimore, MD 21210, USA
References (71)
Show source-provided references
1. 10.1007/s11340-009-9246-510.1007/s11340-009-9246-5 ↗
2. Gilman J. J.: in ‘Chemistry and physics of mechanical hardness’; 2009 New York John Wiley& Sons Inc.10.1002/9780470446836 ↗
3. 10.1080/0950083880822779610.1080/09500838808227796 ↗
4. 10.1007/s11837-009-0029-310.1007/s11837-009-0029-3 ↗
5. Armstrong R. W., and Robinson W. H.: New Zealand J. Sci., 1974, 17, (4), 429–433.
6. Armstrong R. W. and Elban W. L.: in ‘Dislocations in solids’ (ed. Nabarro F R N and Hirth J. P.) Vol. 12 403–446; 2004 Oxford Elsevier B.V.10.1016/S1572-4859(05)80008-7 ↗
7. Haslach H. W.Jr and Armstrong R. W.: ‘Deformable bodies and their material behavior’ Sect. 4·9 159–167; 2004 New York John Wiley & Sons Inc.
8. 10.1016/j.msea.2003.12.00310.1016/j.msea.2003.12.003 ↗
9. 10.1179/174328406X8399610.1179/174328406X83996 ↗
10. 10.1080/0950083031000159427310.1080/09500830310001594273 ↗
11. 10.1080/0950083070120315610.1080/09500830701203156 ↗
12. 10.1080/09500839817871410.1080/095008398178714 ↗
13. 10.1080/1478643100374533610.1080/14786431003745336 ↗
14. 10.1111/j.1151-2916.1978.tb09248.x10.1111/j.1151-2916.1978.tb09248.x ↗
15. 10.1016/0001-6160(59)90156-710.1016/0001-6160(59)90156-7 ↗
16. Elban W. L. and Armstrong R. W.: in ‘Microindentation techniques in materials science and engineering’ (ed. Blau P. J. and Lawn B. R.) ASTM STP 889 109–126; 1986 Philadelphia PA American Society for Testing Materials.
17. 10.1016/j.msea.2005.04.06010.1016/j.msea.2005.04.060 ↗
18. 10.1016/S1359-6454(98)00276-610.1016/S1359-6454(98)00276-6 ↗
19. Frank F. C., and Lawn B. R.: Proc. R. Soc. London A, 1967, 299A, 291.10.1098/rspa.1967.0137 ↗
20. 10.1016/0022-0248(94)91290-410.1016/0022-0248(94)91290-4 ↗
21. 10.1016/0921-5093(89)90195-010.1016/0921-5093(89)90195-0 ↗
22. Armstrong R. W. and Raghuram A. C.: in ‘The science of hardness testing and its research applications’ (ed. Westbrook J. H. and Conrad H.) 174–186; 1973 Materials Park OH ASM.
23. 10.1007/BF0054099310.1007/BF00540993 ↗
24. 10.1007/BF0072099910.1007/BF00720999 ↗
25. Elban W. L. Rosemeier R. G. and Armstrong R. W.: in ‘Microstructural origins of hot spots in RDX explosives and several reference inert materials’ (ed. Elban W. L. et al.) Report NSWC MP 84-358; 1984 Silver Spring MD Naval Surface Weapons Center.
26. Elban W. L.: J. Mater. Sci. Lett., 1979, 14, 1008–1011.
27. Chaudhri M. M.: in ‘Dislocations in solids’ (ed. Nabarro F R N and Hirth J. P.) Vol. 12 447–550; 2004 Oxford Elsevier B.V.10.1016/S1572-4859(05)80009-9 ↗
28. 10.1080/0141861810824040010.1080/01418618108240400 ↗
29. 10.1016/S0921-5093(03)00499-410.1016/S0921-5093(03)00499-4 ↗
30. 10.1063/1.33802410.1063/1.338024 ↗
31. 10.1063/1.165584710.1063/1.1655847 ↗
32. 10.1016/0921-5093(95)10148-910.1016/0921-5093(95)10148-9 ↗
33. 10.1557/JMR.1991.124810.1557/JMR.1991.1248 ↗
34. 10.1007/BF0055713510.1007/BF00557135 ↗
35. 10.1007/BF0056928810.1007/BF00569288 ↗
36. 10.1063/1.32993210.1063/1.329932 ↗
37. 10.1080/0141861830823491410.1080/01418618308234914 ↗
38. 10.1038/173948b010.1038/173948b0 ↗
39. Jindal P. C., and Armstrong R. W.: Trans. TMS-AIME, 1967, 239, 1856–1857.
40. Bassett W. H., and Davis C. H.: Trans. TMS-AIME, 1919, 60, 428–449.
41. Babyak W. J., and Rhines F. N.: Trans. TMS-AIME, 1960, 218, 21–23.
42. Mathewson C. H.: Trans. TMS-AIME, 1919, 60, 451–455.
43. Armstrong R. W., and Jindal P. C.: Trans. TMS-AIME, 1968, 242, 2513.
44. Douthwaite R. M.: J. Iron Steel Inst., 1970, 208, 265.
45. 10.1007/BF0264633810.1007/BF02646338 ↗
46. 10.1063/1.165725410.1063/1.1657254 ↗
47. Raghuram A. C. Armstrong R. W. and Reed R. E.: ‘Proceedings of the second international conference on the strength of metals and alloys’ 99–102; 1970 Materials Park OH ASM.
48. Armstrong R. W.: in ‘Advances in materials research’ (ed. Herman H. H.) Vol. 4 101–146; 1970 New York John Wiley & Sons Inc.
49. Westbrook J. H.: Rev. Metall., 1964, 9, 415.
50. 10.1080/0141861830824523210.1080/01418618308245232 ↗
51. 10.1007/s10853-006-0885-y10.1007/s10853-006-0885-y ↗
52. 10.1016/j.actamat.2008.07.03610.1016/j.actamat.2008.07.036 ↗
53. 10.1557/jmr.2009.008810.1557/jmr.2009.0088 ↗
54. 10.1016/j.msea.2007.01.02810.1016/j.msea.2007.01.028 ↗
55. 10.1143/JPSJ.13.142110.1143/JPSJ.13.1421 ↗
56. Armstrong R. W. and Javadpour S.: in ‘Fourth international conference on aluminum alloys ICAA4 conference proceedings’ Vol. II 405–409; 1994 Georgia Institute of Technology Atlanta GA.
57. Armstrong R. W. and Douthwaite R. M.: in ‘Grain size and mechanical properties – fundamentals and applications’ (ed. Otooni M. A. et al.) Vol. 362 41–47; 1995 Pittsburgh PA MRS.10.1557/PROC-362-219 ↗
58. 10.1016/0036-9748(85)90271-610.1016/0036-9748(85)90271-6 ↗
59. 10.1016/0001-6160(62)90055-X10.1016/0001-6160(62)90055-X ↗
60. Hu H., and Cline R. S.: Trans. TMS-AIME, 1968, 242, 1013–1024.
61. 10.1016/0001-6160(55)90006-710.1016/0001-6160(55)90006-7 ↗
62. Holden F. C., , Ogden H. R., and Jaffee R. I.: Trans. TMS-AIME, 1953, 197, 238–242.
63. 10.1007/BF0264202710.1007/BF02642027 ↗
64. 10.1088/0022-3727/41/7/07400610.1088/0022-3727/41/7/074006 ↗
65. 10.1088/0957-4484/21/33/33570410.1088/0957-4484/21/33/335704 ↗
66. 10.1016/0025-5416(78)90163-510.1016/0025-5416(78)90163-5 ↗
67. 10.1016/S0263-4368(99)00003-710.1016/S0263-4368(99)00003-7 ↗
68. 10.1016/S0965-9773(98)00123-810.1016/S0965-9773(98)00123-8 ↗
69. 10.1016/0001-6160(88)90143-510.1016/0001-6160(88)90143-5 ↗
70. 10.1016/j.ijrmhm.2005.03.01010.1016/j.ijrmhm.2005.03.010 ↗
71. 10.3390/ma407128710.3390/ma4071287 ↗