journal article·2014-09

Short-time heat treatment of press hardened steel for laser assisted clinching

M. Reich, J. Osten, B. Milkereit, J. Kalich, U. Füssel, O. Kessler

Materials Science and Technology· Volume 30· Issue 11
Publisher page

Abstract

Clinching of high strength steels is currently difficult due to their relative low ductility. Hence a new method has been developed to clinch these steel grades. This could be achieved by heating the sheets locally at the joint by a laser during the clinching process. The short-time tempering behaviour of the press hardened steel 22MnB5 has been investigated by dilatometry respectively calorimetry experiments. Different stages of the tempering process have been identified depending on heating rates up to 1000 K s−1. Characteristic tempering reactions were shifted to higher temperatures with increasing heating rate. Based on these results, suitable short-time heat treatment parameters have been selected and transferred to the clinching process. Thereby the press hardened steel 22MnB5 has been successfully clinched with laser assistance for the very first time. The laser assisted clinched joint has been characterised by metallographic analysis and hardness testing. It could be shown, that in the clinching joint only a slight strength loss occurs due to the introduced laser heat.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Rostock, Albert-Einstein-Str. 2, 18059 Rostock, Germany

Chair of Materials Science, University of Rostock, Albert-Einstein-Str. 2, 18059 Rostock, Germany

Polymer Physics Group, University of Rostock, Wismarsche Str. 43-45, 18057 Rostock, Germany

Institute of Manufacturing Technology, Dresden University of Technology, George-Bähr-Str. 3c, 01069 Dresden, Germany

References (18)

Show source-provided references
1. Franz T: ‘Produktionstechnische Aspekte von höchstfesten Stahlgüten’, 25. EFB-Kolloquiums Blechverarbeitung, Fellbach, 2005.
2. DVS: ‘Taschenbuch DVS-Merkblätter und –Richtlinien Mechanisches Fügen’; 2009, Düsseldorf, Deutscher Verband für Schweißen.
3. Füssel U and Kalich J: ‘Mechanical joining of hot stampt steel’, SCT 2011: 3rd Int. Conf. on ‘Steels in cars and trucks’, 592–602; 2011, Salzburg, Verlag Stahleisen.
4. Jahnke H, Retzke R and Weber W: ‘Umformen und Schneiden’; 1972, Berlin, VEB Verlag Technik.
5. Neugebauer R, Lorenz B, Hartwig H, Geiger M, Engel U and Bittner S: ‘Prozessgrundlagen für die Halbwarmumformung wellenförmiger Teile mit weit auskragenden Formelementen’, Forschungsbericht P452; 2003, Düsseldorf, Studiengesellschaft Stahlanwendung e.V.
6. 10.1007/978-3-642-58047-510.1007/978-3-642-58047-5 ↗
7. Doege E, Hübner S, Thoms V and Bräunling S: ‘Thermisch unterstütztes Clinchen von Blechen und Bauteilen aus Magnesium-Knetlegierungen’, EFB-Forschungsbericht Nr. 203, 2003.
8. Thoms V, Kalich J, Westkämper E, Breckweg A and Weis C: ‘Entwicklung von Verfahren und Einrichtungen zum Radialclinchen’, EFB-Forschungsbericht Nr. 197, 2003.
9. 10.1016/j.matdes.2009.10.03810.1016/j.matdes.2009.10.038 ↗
10. Beyer E, Kalich J and Kötter H: ‘Vorrichtung und Verfahren zum formschlüssigen Verbinden von Werkstücken’, Patent DE102004062896B4, 2006.
11. 10.1179/1743284711Y.000000008510.1179/1743284711Y.0000000085 ↗
12. 10.1016/j.tca.2009.01.02710.1016/j.tca.2009.01.027 ↗
13. 10.1023/A:101151472789110.1023/A:1011514727891 ↗
14. Milkereit B, Osten J, Schick C and Kessler O: ‘Continuous heating dissolution diagrams of aluminum alloys’, ICAA13: 13th Int. Conf. on ‘Aluminum alloys’; 2013, Hoboken, NJ, John Wiley & Sons.10.1002/9781118495292.ch164 ↗
15. Reich M, Milkereit B, Krawutschke M, Kalich J, Schick C and Kessler O: ‘Advanced dilatometry and calorimetry for the validation of materials mechanical and transformation models’, 2nd World Cong. on ‘Integrated computational materials engineering’, Salt Lake City, UT, USA, July 2013, John Wiley & Sons.10.1007/978-3-319-48194-4_28 ↗
16. 10.1007/s11661-008-9756-210.1007/s11661-008-9756-2 ↗
17. 10.1002/mawe.1978009110510.1002/mawe.19780091105 ↗
18. 10.1007/978-3-642-75759-410.1007/978-3-642-75759-4 ↗