journal article·2008-01

Continuous separation of Fe–Al–Zn dross phase from hot dip galvanised melt using alternating magnetic field

A. P. Dong, D. Shu, J. Wang, X. C. Cai, B. D. Sun, J. Cui, J. G. Shen, Y. S. Ren, X. D. Yin

Materials Science and Technology· Volume 24· Issue 1
Publisher page

Abstract

Experiments to continuously separate Fe–Al–Zn dross phase from hot dip galvanising zinc melt were conducted on a laboratory scale apparatus by using high frequency alternating magnetic field. Effects of processing time ( t) on separation efficiency were investigated. The experimental results show that using the electromagnetic repulsive force resulting from the electrical conductivity difference between zinc melt and Fe–Al–Zn dross phase, the deleterious zinc dross particles causing surface defects of galvanising steel sheets can be continuously separated from the zinc bath under alternating magnetic field, and the separation efficiency increases with the increase in processing time. When the magnetic frequency is 17·5 kHz, the effective magnetic flux intensity is 0·1 T, the cross-section of the ceramic square pipe is 10 × 10 mm, and the processing time is 0·6–2·5 s, the separation efficiency of zinc dross varies from 43·76 to 85·71%, and the experimental results are in reasonable agreement with the theoretical results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Bauxite Residue and Utilization · Metal Extraction and Bioleaching

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Arioka T., Hori M., Toki T., Yakawa A., and Morikawa M.: Proc. Galvatech'01 Conf., Brussels, Belgium, June 2001, CRM,393–400.
2. Tang N. Y., and Goodwin F. E.: Proc. Galvatech'01 Conf., Brussels, Belgium, June 2001, CRM,49–55.
3. 10.1016/j.solidstatesciences.2004.11.00110.1016/j.solidstatesciences.2004.11.001 ↗
4. 10.1179/02670830422501128910.1179/026708304225011289 ↗
5. Marder A. R. · Frog. Mater. Sci · 2000 · 45 · 191
6. Biele P.: Proc. Galvatech'95 Conf., Chicago, IL, USA, September 1995, Iron and Steel Society,769–775.
7. Toussaint P. · Ironmaking Steelmaking · 1995 · 22 · 498
8. 10.2355/tetsutohagane1955.80.5_38910.2355/tetsutohagane1955.80.5_389 ↗
9. 10.2355/isijinternational.34.72210.2355/isijinternational.34.722 ↗
10. 10.2355/tetsutohagane1955.81.12_112010.2355/tetsutohagane1955.81.12_1120 ↗
11. 10.2355/tetsutohagane1955.83.1_3010.2355/tetsutohagane1955.83.1_30 ↗
12. 10.1007/s11661-999-0135-410.1007/s11661-999-0135-4 ↗
13. Kato C., Koumura H., Mochizuki K., and Morito N.: Proc. Galvatech'95 Conf., Chicago, IL, USA, September 1995, Iron and Steel Society,801–806.