journal article·2014-08

Grain refinement and modification of Al–Si foundry alloys with B and Sr additions

Y. Birol

Materials Science and Technology· Volume 30· Issue 10
Publisher page

Abstract

The effect of B and Sr additions on the grain refinement and modification processes was investigated in the popular AlSi7Mg0·3 alloy to identify the optimum melt treatment to ensure a very fine grained matrix and a fine fibrous eutectic. B and Sr recoveries are low when B and Sr are employed together owing to the formation of the SrB6 compound. This is particularly a concern for Sr when it is introduced into the melt before B. Sr concentrations of the solidified samples are too low to offer modification at an addition rate of 200 ppm Sr. While Sr additions reduce the B recovery in grain refined samples, this is apparently not reflected in the overall grain refining performance. Exceptionally small grains can be obtained at B levels that fail to offer grain refinement when B is added alone. SrB6 particles are believed to compensate for the reduced B concentrations. While the SrB6 compound helps with the grain refinement, they are not involved in the modification process. B (300 ppm) and Sr (300 ppm) provide exceptionally small grains and an adequate modification of the eutectic silicon in a commercial AlSi7Mg0·3 alloy. Increasing the B and Sr addition rates does not provide further improvement in either grain refinement or modification.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Institute Marmara Research Centre, Tubitak, Kocaeli, Turkey

References (34)

Show source-provided references
1. http://www.alueurope.eu/aam/
2. Cook R, Cooper PS and Kearns MA: ‘Benefits of master alloy melt treatments in the aluminum foundry industry’, in ‘Light metals’, (ed. Lindsay S J), 647–654; 1996, Warrendale, PA, TMS.
3. 10.1016/S1359-6462(02)00381-010.1016/S1359-6462(02)00381-0 ↗
4. Gruzleski JE · AFS Trans. · 1992 · 100 · 673
5. Cook R: ‘Grain refinement of aluminium–silicon foundry alloys’; 1998, London, London & Scandinavian Metallurgical Co. Ltd.
6. 10.1002/adem.20039001310.1002/adem.200390013 ↗
7. 10.1007/s11661-999-0098-510.1007/s11661-999-0098-5 ↗
8. 10.1179/09506600122500104910.1179/095066001225001049 ↗
9. 10.1179/imr.1989.34.1.24710.1179/imr.1989.34.1.247 ↗
10. 10.1016/j.jallcom.2005.11.01010.1016/j.jallcom.2005.11.010 ↗
11. 10.1007/BF0265492110.1007/BF02654921 ↗
12. 10.1016/j.msea.2012.08.11510.1016/j.msea.2012.08.115 ↗
13. 10.1016/j.jallcom.2006.03.00210.1016/j.jallcom.2006.03.002 ↗
14. 10.1007/s11661-005-0054-y10.1007/s11661-005-0054-y ↗
15. 10.1179/1743133613Y.000000006410.1179/1743133613Y.0000000064 ↗
16. Lu HT · J. Chin. Foundryman Assoc. · 1981 · 29 · 10
17. Sigworth GK · AFS Trans. · 1985 · 93 · 907
18. Tøndel PA, Halvorsen G and Arnberg L: ‘Light metals’, 783; 1993, Warrendale, PA, TMS.
19. 10.1016/j.msea.2006.10.14510.1016/j.msea.2006.10.145 ↗
20. 10.1179/1743284711Y.000000004910.1179/1743284711Y.0000000049 ↗
21. 10.1007/s12540-013-2012-310.1007/s12540-013-2012-3 ↗
22. 10.1179/1743284711Y.000000005810.1179/1743284711Y.0000000058 ↗
23. 10.1016/j.jallcom.2011.10.01010.1016/j.jallcom.2011.10.010 ↗
24. 10.1023/A:100674632192210.1023/A:1006746321922 ↗
25. Sigworth GK and Guzowski MM: ‘Grain refiner for aluminum containing silicon’, US patent no. 5,055,256, 1988.
26. 10.1179/1743284711Y.000000008110.1179/1743284711Y.0000000081 ↗
27. Campbell J: ‘Complete casting handbook: metal casting processes, metallurgy, techniques and design’, 279; 2011, Waltham, MA, Elsevier.10.1016/B978-1-85617-809-9.10016-7 ↗
28. 10.1179/1743284711Y.000000004110.1179/1743284711Y.0000000041 ↗
29. 10.1179/136404609X36746110.1179/136404609X367461 ↗
30. 10.1016/S1359-6462(02)00648-610.1016/S1359-6462(02)00648-6 ↗
31. 10.1016/S0921-5093(01)01693-810.1016/S0921-5093(01)01693-8 ↗
32. 10.1016/j.msea.2006.07.08110.1016/j.msea.2006.07.081 ↗
33. Schumacher P and Greer AL: in ‘Light metals’, (ed. Evans J W), 869–877; 1995, Warrendale, PA, TMS.
34. Mitra A and Atwood DA: in ‘Boron science: new technologies and applications’, (ed. Hosmane N S), 453; 2011, Boca Raton, FL, CRC Press.