journal article·2010-07

Novel piezoresistive composite with high sensitivity to stress/strain

B. G. Han, B. Z. Han, J. P. Ou

Materials Science and Technology· Volume 26· Issue 7
Publisher page

Abstract

With samples made of composite prepared by adding nickel powder (NP) as a functional filler into cement based material, experiments are carried out to study the piezoresistivity of this NP filled cement based composite (NPCC) under single compressive loading to destruction and within elastic regime. Experimental results indicate that the electrical resistivity of NP filled cement based composite exhibits a three-stage variation trend of fast decrease, slow decrease and steady increase as compressive stress and strain increase under single compressive loading to destruction, and its fractional change goes up to 79·28% maximum. The electrical resistivity of the piezoresistive NPCC decreases 74·67% within elastic regime, and the sensitivity of this composite to compressive stress, compressive strain and transverse tensile strain goes up to 0·158 MPa–1, 1228·2 and 7580 maximum respectively. It therefore can be concluded that the developed piezoresistive NPCC has high sensitivity to stress/strain.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Smart Materials for Construction · Concrete Corrosion and Durability · Advanced Energy Technologies and Civil Engineering Innovations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Civil EngineeringHarbin Institute of Technology, Harbin 150090, China;, Email: hithanbaoguo@china.com.cn

College of Electrical and Electronic EngineeringHarbin University of Science and Technology, Harbin 150040, China

School of Civil EngineeringHarbin Institute of Technology, Harbin 150090, China, School of Civil and Hydraulic Engineering, Dalian University of Technology, Dalian 116024, China

References (32)

Show source-provided references
1. Hou T. C., and Lynch J. P. ‘Conductivity-based strain monitoring and damage characterization of fiber reinforced cementitious structural components’, Proc. SPIE Conf. on ‘Sensors and smart structures technologies for civil, mechanical, and aerospace systems’, San Diego, CA, March 2005, SPIE, vol. 5765,419–429.10.1117/12.599955 ↗
2. Han B. G., and Ou J. P. ‘The humidity sensing property of cements with added carbon’, New Carbon Mater. 2008, 23, (4), 382–384.10.1016/S1872-5805(09)60009-3 ↗
3. Han B. G., Guan X. C., and Ou J. P. ‘Monitoring of hydration using the electrical resistance of carbon fiber cement materials’, New Carbon Mater. 2007, 22, (2), 165–170.
4. Li C. T. · Chn Goner. Cem. Prod · 2005 · 2 · 5
5. Yu X. · Smart Mater. Struct · 2009 · 055010
6. 10.1177/1045389X0809419010.1177/1045389X08094190 ↗
7. 10.1016/S0008-8846(98)00204-X10.1016/S0008-8846(98)00204-X ↗
8. Wei W. B. · 2003
9. Jian H. L. · 2004
10. 10.1016/S0008-8846(01)00474-410.1016/S0008-8846(01)00474-4 ↗
11. Zheng L. X. · J. Exp. Mech · 2004 · 19 · 206
12. Zheng L. X. · J. Huazhong Univ. Sci. Technot · 2004 · 32 · 55
13. Huang L. N. · J. Mater. Eng · 2005 · 2 · 33
14. Xiao H. G.: Tiezoresistivity of cement-based composite filled with nanophase materials and self-sensing smart structural system’, Dissertation for the Doctor Degree in Engineering, Harbin Institute of Technology, Harbin, China, 2006.
15. Wang W., Wu S. G., and Dai H. Z. ‘Fatigue behavior and life prediction of carbon fiber reinforced concrete under cyclic flexural loading’, Mater. Sci. Eng. A, 2006, A434,347–351.10.1016/j.msea.2006.07.080 ↗
16. Wen S. H. · Carbon · 2006 · 2
17. 10.1088/0964-1726/9/4/30210.1088/0964-1726/9/4/302 ↗
18. Mao Q. Z. · Acta Mech. Solida Sin · 1997 · 10 · 338
19. Fu X. L. · Carbon · 1998 · 5
20. Zhou Z. J. · J. Chn Ceram. Soc · 2001 · 29 · 192
21. Zhang X. X. · J. Beijing Inst. Technot · 2002 · 22 · 254
22. Guan X. C. · Mater. Sci. Technol · 2003 · 11 · 343
23. Han B. G. · Acta Mater. Compos. Sin · 2004 · 21 · 136
24. 10.1016/j.sna.2007.05.01110.1016/j.sna.2007.05.011 ↗
25. 10.1016/j.carbon.2006.10.02410.1016/j.carbon.2006.10.024 ↗
26. 10.1016/j.sna.2006.08.00310.1016/j.sna.2006.08.003 ↗
27. Huang Y., Xiang B., Ming X. H., Fu X. L, and Ge Y. J. ‘Conductive mechanism research based on pressure-sensitive conductive composite material for flexible tactile sensing’, Proc. IEEE Int. Conf. on ‘Information and automation’, Hunan, China, June 2008, IEEE Robotics and Automation Society,1614–1619.10.1109/ICINFA.2008.4608262 ↗
28. 10.1103/PhysRevLett.90.23660110.1103/PhysRevLett.90.236601 ↗
29. 10.1016/j.carbon.2005.03.03510.1016/j.carbon.2005.03.035 ↗
30. Lu J. R. · Polym · 1
31. Chen B. · J. Mater. Set Teehnot · 2004 · 20 · 746
32. Mao Q. Z. · J. Wuhan Univ. Teehnot · 1996 · 11 · 41