Magnetic pulse welding of Al to Mg alloys: Structural–mechanical properties of the interfacial layer
Source abstract
Abstract
The magnetic pulse welding of Al-A1050 to Mg alloys was successfully performed, and the structural–mechanical properties of the interfacial bonding layer produced between dissimilar metals were studied. The morphology of the interface layer has a typical wavy pattern with an average thickness of 20 μm. Compositional microanalysis showed that the composition of the interfacial layer is Al–50 at-Mg and is practically uniform, being a direct outcome of the local melting effect, intensive mixing of the melt and a rapid rate of solidification. The composition of the bonding layer corresponds to the Al supersaturated intermetallic β phase (Mg17Al12). The elastic modulus (and the hardness) of the interfacial layer was measured using the nanoindentation technique, and its value of 60·2±1·4 GPa is in good agreement with the value calculated from first principles in the literature (57·3 GPa) for the Mg17Al12 intermetallic phase.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Engineering, Ben-Gurion University, PO box 653, Beer-Sheva 84105, Israel
NRC-Negev, PO box 9001, Beer-Sheva 84190, Israel
References (45)
Show source-provided references
1. ASM International: ‘ASM handbook’, Vol. 3, ‘Phase diagrams’; 1992, Materials Park, OH, ASM International.
2. 10.1016/j.stam.2004.11.01410.1016/j.stam.2004.11.014 ↗
3. Ben-Artzy A, Stern A, Frage N, Shribman V: ‘Magnetic pulse welding – a novel joining technique’, Proc. 30th Int. Israeli Conf. on ‘Mechanical engineering’, The Society of Mechanical Engineers in Israel (AEAI), Tel-Aviv, Israel, May 2005, p.223.
4. Shribman V, Kramer H: Proc. 1st Technical Conf. on ‘Industrialized magnetic pulse welding and forming’, Munich, Germany, July 2008, SLV Munich, paper 8.
5. Shribman V, Tomer Y: Tube Pipe, Nov.Dec. 2006, 91–95.
6. Volobuev · Weld. Prod. · 1972 · 19 · 12
7. Karakozov ES · Weld. Prod. · 1977 · 24 · 6
8. Chankvetadze ZA · Automat. Weld. (USSR) · 1979 · 32 · 26
9. Karpouchin VF, Glouschenkov VA, Mironov VA: ‘Magnetic pulse welding’, Proc. Conf. JOM-5, O. Al-Erhayem, Helsingor, Denmark, May 1991, European Institute for Joining of Materials, 241–245.
10. Glouschenkov VA, Karpouchin VF, Pesotsky VA: ‘Achievements in magnetic pulse welding and assembly of tubular structures’, Proc. Conf. JOM-6, Helsingor, Denmark, April 1993, European Institute for Joining of Materials, 473–484.
11. Buchholz K · Automot. Eng. Int. · 1998 · 106 · 41
12. Winter D · Auto World · 1999 · 35 · 57
13. Pezzutti M · Weld. J. · 2000 · 79 · 43
14. Livshitz Y, Gafri O, Spitz B, Shribman V: ‘Magnetic pulse welding of magnesium’, Proc. 2nd Int. Conf. on “Magnesium science and technology’, Magnesium Research Institute – MRI, Dead Sea, Israel, February 2000, (paper 82).
15. Chankvetadze ZA · Fiz. Khim. Obrab. Mater. · 1974 · 4 · 132
16. 10.2207/qjjws.7.7510.2207/qjjws.7.75 ↗
17. Sergeeva YA · Paton Weld. J. · 1989 · 1 · 874
18. Efimenko AA · Weld. Prod. (USSR) · 1985 · 32 · 30
19. Stern A, Kohn G, Gafri O, Shribman V: ‘Interface morphology in electromagnetic impulse welded Al-1050 to AZ91 Mg alloy’, Proc. 2nd Int. Conf. on “Magnesium science and technology’, Magnesium Research Institute – MRI Dead Sea, Israel, February 2000, (paper 84).
20. Stern A, Aizenshtein M, Shribman V, Gafri O: ‘A study of the interface in magnetic pulse welding of dissimilar metals’, Proc. Int. Conf. on ‘Welding and joining – 2000: new materials and new perspectives’, The Society of Mechanical Engineers in Israel (AEAI), Tel-Aviv, Israel, July 2000, p.62.
21. Stern A, Admon U, Aizenshtein M, Shribman V, Livshitz Y, Gafri O: ‘Bond structure in electromagnetic pulse welding of similar and dissimilar metals’, Proc. Conf. Eurojoin 4, Cavtat-Dubrovnik, Croatia, Croatian Welding Society, May 2001, pp.75–82.
22. 10.1179/13621710222500267310.1179/136217102225002673 ↗
23. Shribman V · Weld. J. · 2002 · 81 · 33
24. 10.1179/174329304X868510.1179/174329304X8685 ↗
25. Ben-Artzy A, Stern A, Frage N, Shribman V: ‘MPW of dissimilar metal couples’, Proc. Conf. on ‘Welding and joining – 2005: frontiers of materials joining’, The Society of Mechanical Engineers in Israel (AEAI), Tel-Aviv, Israel, January 2005, p.246.
26. Aizawa T · Weld. J. · 2007 · 86 · 119
27. 10.1016/j.msea.2007.04.03310.1016/j.msea.2007.04.033 ↗
28. 10.1179/174329308X30013610.1179/174329308X300136 ↗
29. Zhang Y · J. Mater. Process. Tech · 2010
30. 10.1007/s10853-010-4676-010.1007/s10853-010-4676-0 ↗
31. 10.1179/136217109X44920110.1179/136217109X449201 ↗
32. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
33. 10.1007/s10853-009-3607-410.1007/s10853-009-3607-4 ↗
34. 10.1016/j.msea.2010.03.00610.1016/j.msea.2010.03.006 ↗
35. 10.4028/www.scientific.net/KEM.324-325.67510.4028/www.scientific.net/KEM.324-325.675 ↗
36. 10.1016/S0966-9795(02)00052-310.1016/S0966-9795(02)00052-3 ↗
37. 10.1016/j.compscitech.2005.04.01310.1016/j.compscitech.2005.04.013 ↗
38. 10.1016/j.ijimpeng.2009.07.00810.1016/j.ijimpeng.2009.07.008 ↗
39. 10.1016/j.ijimpeng.2006.08.00610.1016/j.ijimpeng.2006.08.006 ↗
40. 10.1557/jmr.2009.009610.1557/jmr.2009.0096 ↗
41. ‘Metallic materials – instrumented indentation test for hardness and materials parameters. Part 1 – Test method’, Annex F, ISO 14577-1, ISO, Geneva, Switzerland, 2002.
42. 10.1016/S0921-5093(00)01780-910.1016/S0921-5093(00)01780-9 ↗
43. 10.1023/A:101092160871910.1023/A:1010921608719 ↗
44. 10.1016/j.intermet.2009.02.00310.1016/j.intermet.2009.02.003 ↗
45. 10.1088/0022-3727/41/19/19540810.1088/0022-3727/41/19/195408 ↗