journal article·1996-12

Fatigue of a nickel base superalloy with bimodal grain size

S.-F. Toh, W. M. Rainforth

Materials Science and Technology· Volume 12· Issue 12
Publisher page

Abstract

Room temperature fatigue tests in the form of four point bending were performed at a frequency of 20 Hz and a load ratio R= +0·1 on electropolished Waspaloy specimens taken from a forged turbine disc. Samples, which had a partially recrystallised microstructure with a bimodal grain size, were removed from the outer rim of the disc. The S-N curve was similar to that reported for a fully recrystallised structure with a coarse grain size, from the same turbine disc. The dominant crack initiation sites were found to be inclusions with a subsequent stage I crack growth generally along slip bands. Other crack initiation sites observed included slip bands, annealing twins, and grain boundaries. Fatigue deformation occurred by the propagation of planar slip bands. Slip band cracks formed more frequently in coarse grains than expected from their volume fraction. Fluctuations in short crack growth rate were observed and were associated with microstructural features such as grain boundaries and twin boundaries, both of which acted as barriers in the early stages of crack growth. The short crack growth rate versus stress intensity range graph was similar to those from uniform fine grained Waspaloy. MST/3413
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Engineering Materials, University of Sheffield, UK.

References (35)

Show source-provided references
1. 10.1007/BF0322046710.1007/BF03220467 ↗
2. KING J. E.: Mater. Sci. Eng., 1987, 3, 750–764.
3. 10.1080/0141861900823192610.1080/01418619008231926 ↗
4. BROWN C. W. and KING J. E.: in ‘Small fatigue cracks’ (ed. Richie R. O. and Lankford J.) 73–95; 1986 Warrendale PA TMS-AIME.
5. NEWMAN P. and BEEVERS c. J.: in ‘Small fatigue cracks’ (ed. Richie R. O. and Lankford J.) 97–116; 1986 Warrendale PA TMS-AIME.
6. 10.1007/BF0054791810.1007/BF00547918 ↗
7. KENDALL J. M. and KING J. E.: in ‘Advanced materials and processing techniques for structural applications (ASM Europe)’ (ed. Khan T. and Lasalmonie A.) 393–402; 1987 Paris ONERA.
8. KENDALL J. M. GRABOWSKI L. and KING J. E.: in ‘Materials development in turbo-machinery design’ (ed. Taplin D. M. R. Knott J. F. and Lewis M. H.) 231–240; 1989 London The Institute of Metals.
9. 10.1179/03063458479041988110.1179/030634584790419881 ↗
10. KING J. E. VENABLES R. A. and HICKS M. A.: in ‘Advances in fracture research’ Vol. 3 2081–1089; 1984 Oxford Pergamon Press.10.1016/B978-1-4832-8440-8.50210-6 ↗
11. 10.1179/03063458279042747910.1179/030634582790427479 ↗
12. 10.1016/0921-5093(89)90315-810.1016/0921-5093(89)90315-8 ↗
13. 10.1016/0142-1123(91)90005-J10.1016/0142-1123(91)90005-J ↗
14. KENDALL J. M. KING J. E. WOOLLIN P. and KNOTT J. F.: in ‘PM aerospace materials’ 7.1–7.12; 1988 Shrewsbury MPR.
15. 10.1007/BF0064466810.1007/BF00644668 ↗
16. 10.1007/BF0266986710.1007/BF02669867 ↗
17. LAMBERT D., , RAINFORTH W. M., , and GRABOWSKI L.: to be submitted to J. Mater. Sci.
18. LERCH B. A.: ‘Microstructural effects on the room and elevated temperature low cycle fatigue of Waspaloy’, Report CR-165497, NASA, 1982.
19. CLAVEL M. LEVAILLANT C. and PINEAU A.: in ‘Creep-fatigue-environment interactions’ (ed. Pelloux P. M. and Stoloff N. S.) 24–45; 1980 Warrendale PA TMS-AIME.
20. 10.1016/0025-5416(84)90177-010.1016/0025-5416(84)90177-0 ↗
21. 10.1016/0013-7944(81)90116-810.1016/0013-7944(81)90116-8 ↗
22. 10.1016/0142-1123(93)90376-210.1016/0142-1123(93)90376-2 ↗
23. STEPHENS R. R. GRABOWSKI L. and HOEPPNER D. w.: in ‘Short fatigue cracks’ (ed. Miller K. J. and de los Rios E. R.) 335–348; 1992 London Mechanical Engineering Publications.
24. SURESH S.: ‘Fatigue of materials’ 1990 Cambridge Cambridge University Press.
25. GELL M., and LEVERANT G. R.: in ‘Fatigue at elevated temperatures’, STP 520, 37–67; 1973, Philadelphia, PA, ASTM.
26. 10.1016/0001-6160(85)90165-810.1016/0001-6160(85)90165-8 ↗
27. 10.1016/0001-6160(76)90104-810.1016/0001-6160(76)90104-8 ↗
28. 10.1016/0025-5416(82)90129-X10.1016/0025-5416(82)90129-X ↗
29. 10.1016/0025-5416(78)90060-510.1016/0025-5416(78)90060-5 ↗
30. 10.1007/BF0264708510.1007/BF02647085 ↗
31. 10.1007/BF0264314410.1007/BF02643144 ↗
32. 10.1016/0036-9748(89)90363-310.1016/0036-9748(89)90363-3 ↗
33. 10.1016/0921-5093(89)90845-910.1016/0921-5093(89)90845-9 ↗
34. 10.1243/PIME_PROC_1988_202_082_0210.1243/PIME_PROC_1988_202_082_02 ↗
35. 10.1111/j.1460-2695.1992.tb01298.x10.1111/j.1460-2695.1992.tb01298.x ↗