journal article·2001-03

Cyclic deformation behaviour and fatigue crack propagation in AZ91HP and AM50HP

Z. Liu, Wang Z.-G., Y. Wang, Chen L.-H., Zhao H.-J., F. Klein

Materials Science and Technology· Volume 17· Issue 3
Publisher page

Abstract

The purpose of the present work was to investigate room temperature cyclic deformation and crack propagation behaviour in the most widely used die casting magnesium alloy AZ91HP with different heat treatments. In addition, examination of the low cycle fatigue properties of solid solution treated alloy AZ91HP-T4 was emphasised in comparison with AM50HP. Obvious cyclic strain hardening was found in low cycle fatigue tests, especially for AZ91HP-T4 at high cyclic strain amplitudes. Nevertheless, it was very difficult to evaluate differences in low cycle fatigue behaviour between die casting alloy AZ91HP-F, artificially aged alloy AZ91HP-T6, solution treated alloy AZ91HP-T4, and AM50HP(-F) because of the scatter of test data. However, it may be concluded that the last two alloys had greater plastic strain components during cyclic deformation, and AZ91HP-T4 exhibited a longer fatigue life than that of AM50HP at the highest strain amplitude. According to results of tests carried out on AZ91HP compact tension (CT) specimens, it was concluded that solution treatment could reduce the fatigue crack propagation rate, and plasticity induced crack closure was considered to have a predominant effect on fatigue crack propagation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. R. S. BUSK: ‘Magnesium products design’, 373–374; 1987, McLean, VA, International Magnesium Association.
2. M. HILPERT, A. STYCZYNSKI, J. KIESE, and L. WAGNER: in ‘Magnesium alloys and their applications’, 319–324; 1998, Wolfsberg, Austria, Werkstoff-Informationsgesellschaft.
3. 10.1023/A:101854721296610.1023/A:1018547212966 ↗
4. ISHIKAWA K. · J. Jpn Inst. Met · 1997 · 61 · 103110.2320/jinstmet1952.61.10_1031 ↗
5. LIU Z. · Acta Metall. Sin. (China) · 1999 · 35 · 869
6. 10.1115/1.290423610.1115/1.2904236 ↗
7. 10.1016/0013-7944(70)90028-710.1016/0013-7944(70)90028-7 ↗