Application of nanoengineering to research and development and production of high strength steel sheets
Source abstract
Abstract
The design concepts and properties of three unique high strength steel sheets developed utilising nanoengineering are reviewed. The first steel is developed by optimising the distribution of nanoprecipitates and exhibits low yielding ratio in spite of being strengthened by grain refinement and precipitation hardening. The second is the ferrite single phase tensile strength 780 MPa grade advanced high strength steel sheet utilising the thermally stable nanosized precipitates, which possesses significantly well balanced elongation and stretch flangeability. These two were already commercialised. The last is the ultrahigh strength steel, of which the formability is enhanced by optimising the combination of hard phases. The steel consists of bainite, retained austenite and tempered martensite and exhibits 35 of elongation with 1470 MPa of tensile strength. Although further optimisation of the composition and the processing are needed to produce and commercialise the steel, the results indicate that the approach has the potential to improve formability dramatically.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Steel Research Laboratory, JFE Steel Corporation, 1, Kawasaki-cho, Chuo-ku, Chiba 260-0835, Japan
Steel Research Laboratory, JFE Steel Corporation, 1, Kawasakidori, Mizushima, Kurashiki 712-8511, Japan
References (33)
Show source-provided references
1. Pradhan R (ed.): Proc. Symp. on ‘High-strength sheet steels for the automotive industry’, Baltimore, MD, USA, October 1994, the Flat Rolled Products Committee of the Mechanical Working and Steel Processing Division of the Iron and Steel Society, Inc.
2. Speer J G (ed.): Proc. Int. Conf. on ‘Advanced high strength sheet steels for automotive applications’; 2004, Warrendale, PA, AIST.
3. Speer JG, Nelson B, Pradhan R (eds.): Proc. Int. Conf. on ‘New developments in advanced high-strength sheet steels’; 2008, Warrendale, PA, AIST.
4. ‘Advanced high strength steel (AHSS) application guidelines: version 3’, International Iron and Steel Institute, Middletown, OH, USA, 2006.
5. Yoshida M, Shimomura Y: Proc. 13th IDDRG, Melbourne, Vic., Australia, IDDRG, February 1984, Australian Institute of Metals, 46–53.
6. 10.2355/isijinternational.41.140210.2355/isijinternational.41.1402 ↗
7. Hosoya Y, Urabe T, Tanikawa K, Tahara K, Nishimoto N: Proc. Int. Symp. on ‘Interstitial free steel sheet’, Ottawa, Ont., Canada, August 1991, CIM, 107–117.
8. Karlyn DA, Vieth RW, Forand JL: Proc. Conf. on ‘Mechanical working and steel processing VII’, New York, USA, 1969, The Metallurgical Society of AIME, January, 127–130.
9. 10.4028/www.scientific.net/MSF.426-432.148110.4028/www.scientific.net/MSF.426-432.1481 ↗
10. Urabe T, Fujita T, Ono Y, Yamasaki Y, Hosoya Y: ‘Development of IF High Strength Steel with Fine Grain Structure for Exposure Panel’, SAE Technical Paper 2003-01-2769, SAE International, Warrendale, PA, USA, 2003.10.4271/2003-01-2769 ↗
11. Gladman T, Dulieu D, McIvor ID: Proc. Symp. on ‘Microalloying’75’, New York, USA, October 1976, Union Carbide Corp., 32–55.
12. 10.2355/isijinternational.44.194510.2355/isijinternational.44.1945 ↗
13. 10.4028/www.scientific.net/MSF.539-543.481310.4028/www.scientific.net/MSF.539-543.4813 ↗
14. Morrison WB · J. Iron Steel Inst. · 1963 · 201 · 317
15. Korchynsky M, Stuart H: Proc. Symp. on ‘Low alloy high strength steels’, Düsseldorf, Germany, May 1970, The Metallurgy Companies, 17–27.
16. Davenport AT · Proc. Roy. Soc. London A · 1971 · 322 · 19110.1098/rspa.1971.0063 ↗
17. 10.1007/BF0303785410.1007/BF03037854 ↗
18. Kashima T · Kobe Steel Eng. Rep. · 2000 · 50 · 75
19. Kinoshita M · NKK Tech. Rep. · 1994 · 145 · 1
20. Yokota T, Kobayashi A, Ariga T, Funakawa Y, Seto K: ‘Development of Ultra-Fine Precipitation Hardened Hot-Rolled High Strength Steel and Its Application to Automotive Use’, SAE Technical Paper 2005-01-1328, SAE International, Warrendale, PA, USA, 2005.10.4271/2005-01-1328 ↗
21. Matsuoka S · JFE Tech. Rep. · 2007 · 10 · 13
22. 10.2320/materia.42.7610.2320/materia.42.76 ↗
23. 10.2355/isijinternational.44.60310.2355/isijinternational.44.603 ↗
24. 10.1179/02670830110151034810.1179/026708301101510348 ↗
25. 10.1179/02670830110151035710.1179/026708301101510357 ↗
26. 10.1016/j.cossms.2004.09.00510.1016/j.cossms.2004.09.005 ↗
27. 10.1016/S1359-6454(03)00059-410.1016/S1359-6454(03)00059-4 ↗
28. 10.1016/j.cossms.2004.09.00310.1016/j.cossms.2004.09.003 ↗
29. de Cooman BC, Speer J: Proc. 3rd Int. Conf. on ‘Advanced structural steels (ICASS)’, Gyeongju, Korea, August 2006, Korean Institute of Metals and Materials, 798–805.
30. Ponge D, Milla'n J, Dmitrieva O, Sander B, Kostka A, Raabe D: Proc. 2nd Int. Symp. on ‘Steel Science’, Kyoto, Japan, October 2009, The Iron and Steel Institute of Japan, 121–130.
31. 10.1016/j.scriptamat.2009.02.06210.1016/j.scriptamat.2009.02.062 ↗
32. Matsuda H · CAMP-ISIJ · 2010 · 23 · 1176
33. 10.4028/www.scientific.net/MSF.638-642.330710.4028/www.scientific.net/MSF.638-642.3307 ↗