journal article·2010-05

Isothermal embrittlement of Fe–8Mn alloys at 450°C

F. Nikbakht, M. Nasim, C. Davies, E. A. Wilson, H. Adrian

Materials Science and Technology· Volume 26· Issue 5
Publisher page

Abstract

Two Fe–8Mn alloys, one of which is alloy 193, stabilised with 0·17%Ti and 0·18%Al, were austenitised at 900°C, ice brine quenched and their DBTTs determined. In this condition, brittle fractures were predominantly cleavage, and thermodynamic calculations on alloy 193 showed that there were 0·0025 wt-%C and <0·03 ppm N in solid solution. Alloys were tempered for 6 min, 1 h and 10 h at 450°C and their DBTTs again determined; in this case, brittle fractures were mainly intergranular. In alloy 193, DBTT rose from 27 to 125°C in 6 min. Hardness values at 450°C were also monitored and the variation of hardness with time is discussed. It is thought that brittle fracture in alloy 193 is due to segregation of Mn per se to prior austenite grain boundaries, unlike an earlier investigation of a pure Fe–8Mn alloy (K1525), where embrittlement was due to a Mn–N and to a lesser extent a Mn–P interaction at prior austenite grain boundaries. The driving force for Mn segregation to prior austenite grain boundaries is thought to be the initial formation of reverted austenite at such sites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Sheffield PolytechnicSheffield, UK

Sheffield City PolytechnicSheffield, UK

Faculty of ACESSheffield Hallam University, Sheffield S1 1WB, UK

Faculty of Materials and Industrial Computer ScienceUniversity of Science and Technology, Al Mickiewicza 30, Kraków 30059, Poland

References (42)

Show source-provided references
1. Kelly P. M. · J. Iron Steel Inst · 1961 · 197 · 199
2. Owen W. S., Wilson E. A., and Bell T. ‘High strength materials’, 167–208; 1965, New York, Wiley.
3. Schumann H. · Neue Hiitte · 1974 · 19 · 166
4. Bolton J. D. · J. Iron Steel Inst · 1969 · 207 · 1314
5. 10.1007/BF0303785510.1007/BF03037855 ↗
6. 10.1179/03063457179043951310.1179/030634571790439513 ↗
7. Holden A. · J. Iron Steel Inst · 1971 · 209 · 721
8. Freeman B. · 1973
9. Gabbitas B. L. ‘The properties of manganese containing steels’, PhD thesis, University of Leeds, Leeds, UK, 1973.
10. 10.1016/0036-9748(78)90303-410.1016/0036-9748(78)90303-4 ↗
11. Nasim M. ‘Brittleness in ferritic Fe-Mn alloys’, PhD thesis, Sheffield City Polytechnic, Sheffield, UK, 1979.
12. Brook R., and Russell J. E.: in ‘Metallurgical developments in high alloy steels’, Special Report 86, 19-23; 1964, London, The Iron Steel Institute.
13. Hardwick D.: in ‘Metallurgical developments in high alloy steels’, Special Report 86, 49-60; 1964, London, The Iron Steel Institute.
14. Bolton J. D., Petty E. R., and Allen G. B.: Metall Trans. 1971, 2, 2915–2923.10.1007/BF02813271 ↗
15. Nasim M., Edwards B. C., and Wilson E. A.: Mater. Set Eng. A, 2000, A281, 56–67.10.1016/S0921-5093(99)00734-0 ↗
16. Ress W. P. · J. Iron Steel Inst · 1951 · 169 · 157
17. Charushnikova G, A., Goldstein Ya. E., and Razimov Yu. G.: Met. Set Heat Treat. J.1969, (7), 539–542.10.1007/BF00654275 ↗
18. Stannard D. M., and Baker A. J.: in Proc. 5th Int. Conf. on ‘Strength of metals and alloys’,Vol. 2, 1371-1376; 1979, Oxford, Pergamon Press.10.1016/B978-1-4832-8412-5.50226-5 ↗
19. 10.1007/BF0265831710.1007/BF02658317 ↗
20. Nasim M., and Wilson E. A.: in Proc. Conf. on ‘Phase transformations’, York, UK, April 1979, Institution of Metallurgists,Vol. 2, v-21-v-25.
21. Jones R. D., Palmer G. R., Jerath V., Kapoor S., and Yeldham R. J.: in Proc. 6th Int. Conf. on ‘Strength of metals and alloys’,Vol. 3, 1225-1230; 1982, Oxford, Pergamon Press.10.1016/B978-1-4832-8423-1.50177-2 ↗
22. Duchateau D. · Met. Set · 1982 · 17 · 229
23. Nasim M., Bramhall M. D., Edwards B. C., and Wilson E. A.: in ‘The processing, properties, and applications of metallic and ceramic materials’,Vol. 2, 845–454; 1992, Birmingham, IRC.
24. Floreen S. · Trans ASM · 1962 · 55 · 518
25. 10.1016/0025-5416(78)90149-010.1016/0025-5416(78)90149-0 ↗
26. Guttmann M. · Met. Set · 1976 · 10 · 337
27. Fuller B. A. · J. Iron Steel Inst · 1972 · 210 · 206
28. 10.1007/s11661-004-0137-110.1007/s11661-004-0137-1 ↗
29. Guttmann M. · Met. Set · 1976 · 10 · 337
30. 10.2320/matertrans1960.24.58910.2320/matertrans1960.24.589 ↗
31. 10.1016/0036-9748(87)90108-610.1016/0036-9748(87)90108-6 ↗
32. 10.1179/mst.1992.8.5.40610.1179/mst.1992.8.5.406 ↗
33. Adrian H. · Proc. Int. Conf. Microalloying ‘95, (ed.
34. Adrian H. ‘Thermodynamic model for precipitation of carboni-trides in HSLA steels with an application to hardenability investigations’; 1995, Krak6w, AGH.
35. Grieveson P. · Proc. Br. Ceram. Soc · 1967 · 8 · 137
36. Wagner C. ‘Thermodynamics of alloys’; 1952, Reading, MA, Addison-Wesley.
37. 10.2355/isijinternational1966.15.14510.2355/isijinternational1966.15.145 ↗
38. Kunze J. · Met. Set · 1982 · 16 · 217
39. 10.2355/isijinternational1966.18.19810.2355/isijinternational1966.18.198 ↗
40. 10.1007/BF0264497910.1007/BF02644979 ↗
41. 10.1016/0364-5916(86)90021-010.1016/0364-5916(86)90021-0 ↗
42. Herman J. C. · CRM · 1982 · 59 · 11