journal article·2003-01

Effect of cooling rate on structure and mechanical properties of monotectoid zinc-aluminium alloys

T. Savaşkan, M. Ş. Turhal, S. Murphy

Materials Science and Technology· Volume 19· Issue 1
Publisher page

Abstract

The cooling curves of a number of monotectoid zinc-aluminium allows have been obtained during casting at different pouring and mould temperatures using thermocouples and an analogue-digital converter in a computer. The average cooling rate for each ingot of the allows was determined by taking the derivative of the cooling curves. The effect of cooling rate on the structure and properties of the alloys was investigated. It was observed that as the cooling rate increased the secondary dendrite arm spacing of the alloys decreased but their hardness, tensile strength and percentage elongation increased. Correlation of the experimental results showed that the cooling rate of the alloys could be related to their secondary dendrite arm spacing, hardness, tensile strength and percentage elongation using first and second degree mathematical equations. In addition, the Skenazi equation was found to be applicable to these alloys. As a result of this work, the optimum range of cooling rate for the alloys was found to be between 4·40−4·56 K s-1.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Professor Savaşkan (savaskan@ktu.edu.tr) and Dr Turhal, Mechanical Engineering Department, Karandeniz Techical Univeristy 61080 Trabzon, Turkey and Dr Murphy is in the School of Engineering and Applied Science, Aston University, Birmingham B4 7ET, UK

References

Reference metadata was not supplied for this record.