Investigation into manufacturing Fe–Cu–C alloy parts through indirect selective laser sintering
Source abstract
Abstract
The properties of alloy parts can be adjusted conveniently if alloy element powders are used for manufacturing alloy parts by indirect selective laser sintering, but no research has been reported on this so far. In this paper several composite powders have been obtained by blending pure Fe, Cu and graphite powders, which have been used to produce green parts by indirect selective laser sintering. Cu infiltrated Fe–Cu–C alloy was manufactured after green parts had been degreased, high temperature sintered and infiltrated. Contents of composite powders, post-processing of green parts, microstructures and mechanical property of alloys were investigated. The results indicate that: Cu and C can diffuse into γ-Fe when green parts are being sintered at high temperature; the microstructures of alloy are composed of a large quantity of eutectoid structures mixtures of Fe–C and Fe–Cu at room temperature besides a coarse structure; the eutectoid structure varies regionally owing to the inhomogeneous concentration of Cu and C; the yield strength of Fe–Cu–C sample alloys is >300 MPa and the elongation is <3%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. 10.1007/s11837-003-0175-y10.1007/s11837-003-0175-y ↗
2. 10.1243/09544050232101635010.1243/095440502321016350 ↗
3. Goode E. · Adv. Mater. Process · 2003 · 161 · 66
4. Khoshnevis B., Asiabanpour B., Mojdeh M., and Palmer K.: Rapid Protot. 1, 2003,9, (1), 30–36.10.1108/13552540310455638 ↗
5. Kruth J. P., Wang X., Laoui T., and Froyen L.: Assembly Autom. 2003, 23, (4), 357–371.10.1108/01445150310698652 ↗
6. Uzunsoy D., Chang I. T. H., and Bowen P.: Mater. Sci Technol., 2003,19, (7), 897–901.10.1179/026708303225004350 ↗
7. Hunt M. W.: Adv. Mater. Process., 2000,158, (5), 16.10.2307/3981229 ↗
8. 10.1021/ie00022a01410.1021/ie00022a014 ↗
9. Bear J. ‘Dynamics of fluids in porous media’; 1972, New York, American Elsevier.
10. Chen H. Z. ‘Viscosity measurement’; 1994, Beijing, China Metrology Press (in Chinese).
11. Jamil S. J., and Chadwick G. A.: Powder Metall. 1985, 28, (2), 65–71.10.1179/pom.1985.28.2.65 ↗
12. Zhang S. B., and Li D. Z. ‘Phase diagram: theory, computation and the use in metallurgy’; 1986, Beijing, China Metallurgy Industry Press (in Chinese).
13. 10.1007/BF0281173910.1007/BF02811739 ↗
14. Hidenori K. · Int. J. Powder Metall · 1999 · 35 · 57
15. Sif-Eddine A · Mater. Res. Adv. Tech · 1999 · 90 · 116
16. Cheng D. Y. ‘Metal materials’; 1989, Xian, Shanxi Education Press (in Chinese).