journal article·2009-06

Mechanism of reaction of molten NiTi with EBM graphite crucible

S. K. Sadrnezhaad, E. Ahmadi, M. Malekzadeh

Materials Science and Technology· Volume 25· Issue 6
Publisher page

Abstract

Ultra clean NiTi shape memory alloy was produced by electron beam melting of Ni rich vacuum inductionally melted butts together with pure Ti chunks in both condensed and electrographite crucibles. A hollow cathode discharge gun was used for heating up to 1623, 1653 and 1693 K and holding the charge materials under vacuum for 300, 600, 900 and 1200 s. Effects of temperature, time and compactness of the crucible on formation/disappearance of the hard compounds like Ni3Ti, Ti4Ni2O, Ti4Ni2C, Ti3Ni2OC and TiC were determined by X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. A combination of the experimental results with the kinetic rate equations indicated that the reaction between NiTi and the crucible obeyed first order transfer kinetics with carbon intake activation energy of 225·8 kJ mol–1 for the NiTi shape memory alloy melt.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Advanced Memory and Neural Computing · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials and Energy Research CenterPO box 14155 4777, Tehran, Iran and Center of Excellence for Production of Advanced Materials, Department of Materials Science and Engineering, Sharif University of Technology, PO box 11365 9466, Tehran, Iran;, Email: sadrnezh@sharif.edu

Materials and Energy Research CenterPO box 14155 4777, Tehran, Iran and Center of Excellence for Production of Advanced Materials, Department of Materials Science and Engineering, Sharif University of Technology, PO box 11365 9466, Tehran, Iran

References (36)

Show source-provided references
1. 10.1007/s00216-004-2888-310.1007/s00216-004-2888-3 ↗
2. Mihalcz I. · Period. Polytechn. Ser. Mech. Eng · 2001 · 45 · 75
3. Otsuka K. · Frog. Mater. Sci · 2005 · 50 · 511
4. 10.1016/j.jallcom.2003.12.01610.1016/j.jallcom.2003.12.016 ↗
5. 10.1016/S0966-9795(00)00024-810.1016/S0966-9795(00)00024-8 ↗
6. Chung C. Y. · Mater. Lett · 2004 · 58
7. Chu C. L., Chung C. Y., Lin P. H., and Wang S. D.: Mater. Sci. Eng. A, 2004, A366,114–119.10.1016/j.msea.2003.08.118 ↗
8. 10.1016/S0254-0584(99)00258-810.1016/S0254-0584(99)00258-8 ↗
9. Leppaniemi A. ‘Shape memory alloys applications and commercial aspects’, available at: www.sma.inc.com (2004).
10. Chen M. F., Yang X. J., Hu R. X, Cui Z. D., and Man H. C.: Mater. Sci. Eng. C, 2004, C24,497–502.10.1016/j.msec.2003.11.001 ↗
11. Huang W. · 1998
12. 10.1016/j.scriptamat.2004.11.00210.1016/j.scriptamat.2004.11.002 ↗
13. Li B. Y., Rong L. J., Li Y. Y., and Gjunter V. E.: Acta Mater. 2000, 48, 3895–3904.10.1016/S1359-6454(00)00184-1 ↗
14. 10.1016/j.jallcom.2004.05.00210.1016/j.jallcom.2004.05.002 ↗
15. 10.1179/02670830422501668010.1179/026708304225016680 ↗
16. Sadrnezhaad S. K. · J. Mater. Sci. Technol · 2005 · 21 · 484
17. 10.1002/mawe.20040072510.1002/mawe.200400725 ↗
18. 10.1002/adem.20040017310.1002/adem.200400173 ↗
19. Zhang Z., Frenzel J., Neuking K., and Eggeler G.: Acta Mater. 2005, 53, 3971–3985.10.1016/j.actamat.2005.05.004 ↗
20. 10.1590/S1516-1439200400020000810.1590/S1516-14392004000200008 ↗
21. 10.1051/jp4:2003102010.1051/jp4:20031020 ↗
22. Ogasawara Y. · Int · 1998 · 38 · 789
23. Otubo J., Rigo O. D., Moura Neto C., and Mei P. R.: Mater. Sci. Eng. A, 2006, A438-440,679–682.10.1016/j.msea.2006.02.171 ↗
24. Mitchell A.: Mater. Sci. Eng. A, 1999, A263,217–223.10.1016/S0921-5093(98)01177-0 ↗
25. 10.1016/j.vacuum.2004.08.01610.1016/j.vacuum.2004.08.016 ↗
26. Yukitomi U., and Katsutosi O.: Proc. 5th Int. Conf. on ‘Titanium’, Munich, Germany, September 1984, Deutsche Gesellschaft fur Metallkunde,846–851.
27. Dietrich W. · Met. Handbook · 1995 · 15 · 410
28. Watakabe S., Suzuki K., and Nishikawa K.: ISIJ Int. 1992, 32, (5), 625–629.10.2355/isijinternational.32.625 ↗
29. Duerig T. W., and Pelton R. A.: in ‘Material properties handbook: Titanium handbook’, 1035–1048; 1994, Metals Park, OH, ASM International.
30. Wasilewski R. J., Butler S. R., Hanlon J. E., and Worden D.: Metall. Trans., 1971, 2„229–238.10.1007/BF02662662 ↗
31. Koskimaki D. · Trans. Metall. Soc. AIME · 1969 · 245
32. Ahmadi E., Sadrnezhaad S. K., and Sayedi H.: Proc. 9th Ann. Conf. Metallurgical Engineering Society of Iran, Tehran, Iran, July 2005,244–255.
33. Rozner A. G. · Trans ASM · 1965 · 58 · 415
34. Takeshita H. T., Tanaka H., Kiyobayashi T., Takeichi N., and Kuriyama N.: J. Alloys Compd, 2002, 330-332,517–521.10.1016/S0925-8388(01)01458-X ↗
35. 10.1007/s11106-006-0045-610.1007/s11106-006-0045-6 ↗
36. 10.1016/j.matchar.2006.04.02210.1016/j.matchar.2006.04.022 ↗