Using carbon nanotubes to enhance creep performance of lead free solder
Source abstract
Abstract
In the present study, the influence of multiwalled carbon nanotubes (CNTs) on the creep performance of 95·8Sn–3·5Ag–0·7Cu lead free solder is investigated. Composite solders containing varying weight percentages of CNTs were synthesised. Solder joints were fabricated and subjected to a series of tests under testing temperatures ranging from 25 to 125°C and applied stresses ranging from 4 to 18 MPa. Creep results revealed that solders containing CNTs exhibited significantly improved creep resistance and also creep time to failure increased. Stress exponents of composite solders were higher than that of monolithic solder. In general, stress exponent was found to increase with increasing applied stress and with decreasing testing temperature. The range of activation energies of composite solder with 0·01 wt-%CNT addition was found to be comparable to that of monolithic Sn–Ag–Cu. However, as the amount of CNT increased to 0·04 wt-%, the range of activation energies increased accordingly.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Carbon Nanotubes in Composites · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Abtew M., and Selvaduray G.: Mater. SW Eng. R, 2000, R27, (5-6),95–141.10.1016/S0927-796X(00)00010-3 ↗
2. Gibson W., Choi S., Bieler T. R., and Subramanian K. N.: Proc. IEEE Int. Symp. on ‘Electronics and the environment’, San Francisco, CA, USA, May 1997, IEEE, 246 — 251.
3. Morris J. W., Goldstein J. F., and Mei Z.: in ‘The mechanics of solder alloy interconnects’, (ed.Frear D.), 7-40; 1994, New York, ITP.
4. Lau J. H., Nakayama W., Prince J., and Wong C. P. ‘Electronic packaging: design, materials, process and reliability’; 1998, New York, McGraw Hill.
5. 10.1007/s00542010010310.1007/s005420100103 ↗
6. Shi Y. W.: China-European Union Workshop on ‘Materials strategy for new millennium’, Beijing, China, December 2000, 39.
7. 10.2320/matertrans.43.184710.2320/matertrans.43.1847 ↗
8. 10.1007/s11664-001-0147-310.1007/s11664-001-0147-3 ↗
9. Kikuchi S., Nishimura M., Suetsugu K., Ikari T., and Matsushige K.: Mater. Sci Eng. A, 2001, A54, (6),475–479.10.1016/S0921-5093(01)01031-0 ↗
10. 10.1063/1.12180010.1063/1.121800 ↗
11. 10.1016/S0167-577X(03)00023-510.1016/S0167-577X(03)00023-5 ↗
12. 10.1038/354056a010.1038/354056a0 ↗
13. 10.1103/PhysRevLett.84.555210.1103/PhysRevLett.84.5552 ↗
14. 10.1016/S0039-6028(01)01558-810.1016/S0039-6028(01)01558-8 ↗
15. 10.1016/S1359-8368(02)00012-410.1016/S1359-8368(02)00012-4 ↗
16. 10.1016/S0266-3538(02)00002-710.1016/S0266-3538(02)00002-7 ↗
17. 10.1016/S0008-6223(02)00012-X10.1016/S0008-6223(02)00012-X ↗
18. 10.1016/S0266-3538(03)00036-810.1016/S0266-3538(03)00036-8 ↗
19. 10.1016/j.compscitech.2004.10.00610.1016/j.compscitech.2004.10.006 ↗
20. 10.1038/nmat74710.1038/nmat747 ↗
21. 10.1002/adma.20040193310.1002/adma.200401933 ↗
22. 10.1007/s11664-006-0142-910.1007/s11664-006-0142-9 ↗
23. 10.1007/s11664-004-0023-z10.1007/s11664-004-0023-z ↗
24. Askeland D. R. ‘The science and engineering of materials’, 174; 1996, London, Chapman & Hall.10.1007/978-1-4899-2895-5 ↗
25. 10.1007/978-1-4684-1440-0_110.1007/978-1-4684-1440-0_1 ↗
26. 10.1007/s11664-001-0153-510.1007/s11664-001-0153-5 ↗
27. Bird J. E., Mukherjee A. K., and Dorn J. E. ‘Quantitative relation between properties and microstructure’, 225; 1969, Israel, Israel University Press.
28. 10.1115/1.290931010.1115/1.2909310 ↗
29. 10.1115/1.279207410.1115/1.2792074 ↗
30. 10.1115/1.146262410.1115/1.1462624 ↗
31. 10.1016/j.actamat.2004.06.01010.1016/j.actamat.2004.06.010 ↗
32. 10.1007/s11664-005-0193-310.1007/s11664-005-0193-3 ↗
33. 10.1557/JMR.2002.042010.1557/JMR.2002.0420 ↗
34. 10.1007/s11664-002-0098-310.1007/s11664-002-0098-3 ↗
35. 10.1016/0921-5093(94)09654-610.1016/0921-5093(94)09654-6 ↗
36. 10.1007/BF0264559310.1007/BF02645593 ↗
37. Xiao Q. · Proc. Electron. Compon. Technol. Conf., Las Vegas, NV, USA, June 2004, IEEE, · 1325
38. 10.1179/imr.1995.40.2.6510.1179/imr.1995.40.2.65 ↗
39. 10.1016/j.microrel.2004.04.01610.1016/j.microrel.2004.04.016 ↗
40. 10.1108/0954091051063037710.1108/09540910510630377 ↗
41. 10.1007/s11664-000-0150-010.1007/s11664-000-0150-0 ↗
42. Nai S. M. L., Wei J., and Gupta M.: Mater. Sci Eng. A, 2006, A423, (1-2), 166.10.1016/j.msea.2005.10.072 ↗
43. Nai S. M. L. · Proc. ASME Int. Mech. Eng. Cong. Exposit., Seattle, WA, USA, November 2007, ASME, Paper IMECE2007-41762, pp. · 1