journal article·1994-02

Influence of interface properties on mechanical behaviour of particle reinforced metal matrix composite

M. Vedani, E. Gariboldi, G. Silva, C. Di Gregorio

Materials Science and Technology· Volume 10· Issue 2
Publisher page

Abstract

The mechanical properties and fracture mechanism of an aluminium alloy A356–20 vol.-%SiCP cast composite are presented and related to the treatments experienced during the casting procedure and to the aging evolution of the alloy. The treatments were aimed at investigating possible changes of the composite damage mechanism produced by modifying the properties of the matrix/reinforcement interface region. An A356–5%SiCP composite was also characterised to support the study on the conventional composite and to carry out calculations, based on the ductile fracture mechanism, concerning the interface stress acting in the material at fracture. Notwithstanding the approximation of the calculation method, the results obtained quantitatively confirmed the fractographic observations. It is suggested that there was a progressive weakening or embrittlement of the interfaces either when liquid phase reactions occurred or when the matrix alloy was overaged.MST/1864
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. CORNIE J. A. · MRS Bull. · 1991 · 4 · 3210.1557/S0883769400057080 ↗
2. L. J. BROUTMAN and R.H. KROCH: 'Composite materials, vol. 1: interfaces in metal matrix composites', (ed. A. G. Metcalfe), 125–132; 1974, New York/London, Academic Press.
3. K. SCHULTE and K. WNOSHIMA: in Proc. 12th Riso Int. Symp. 'Metal matrix composites — processing, microstructure and mechanical properties', (ed. N. Hansen et al.), 123–147; 1991, Roskilde, Denmark, Riso National Laboratory.
4. 10.1016/0956-7151(91)90329-Y10.1016/0956-7151(91)90329-Y ↗
5. 10.1016/0001-6160(87)90188-X10.1016/0001-6160(87)90188-X ↗
6. 10.1016/0167-6636(91)90014-Q10.1016/0167-6636(91)90014-Q ↗
7. 10.1016/0025-5416(86)90261-210.1016/0025-5416(86)90261-2 ↗
8. 10.1520/CTR10276J10.1520/CTR10276J ↗
9. R. J. ARSENAULT and M. TAYA: in Proc. 5th Int. ConE On 'Composite materials' (ICCM-5), 21–36; 1985, Warrendale, PA, TMS-AIME.
10. 10.1016/0036-9748(88)90019-110.1016/0036-9748(88)90019-1 ↗
11. 10.1179/mst.1990.6.7.62110.1179/mst.1990.6.7.621 ↗
12. R. Da SILVA, D. CALDEMAISON, and T. BRETHEAU: in 'Mechanics and mechanisms of damage in composites and multimaterials', (ed. D. Baptiste, 395–400; 1991, London, Mechanical Engineering Publications.
13. 10.1007/BF0116057910.1007/BF01160579 ↗
14. 10.1007/BF0104539510.1007/BF01045395 ↗
15. 10.1007/BF0173043510.1007/BF01730435 ↗
16. 10.1063/1.9373010.1063/1.93730 ↗
17. 10.1007/BF0058108010.1007/BF00581080 ↗
18. 10.1063/1.33740510.1063/1.337405 ↗
19. 10.1007/BF0056306710.1007/BF00563067 ↗
20. 10.1007/BF0112995310.1007/BF01129953 ↗
21. 10.1007/BF0057541610.1007/BF00575416 ↗
22. 10.1007/BF0264774010.1007/BF02647740 ↗
23. D. I. LLOYD and B. CHAMBERLAIN: in Proc. Int. Symp. on 'Advances in cast reinforced metal composites', (ed. S. G. Fishman and A. K. Dhingra), 263–269; 1988, Materials Park, OH, ASM.
24. 10.1016/0921-5093(89)90376-610.1016/0921-5093(89)90376-6 ↗
25. 10.1179/mst.1990.6.9.85710.1179/mst.1990.6.9.857 ↗
26. 10.1016/0921-5093(89)90345-610.1016/0921-5093(89)90345-6 ↗
27. 10.1007/BF0264772110.1007/BF02647721 ↗
28. 10.1016/0956-7151(90)90071-N10.1016/0956-7151(90)90071-N ↗
29. 10.1177/00219983880220090410.1177/002199838802200904 ↗
30. 10.1016/0001-6160(88)90236-210.1016/0001-6160(88)90236-2 ↗
31. 10.1007/BF0285134910.1007/BF02851349 ↗
32. 10.1016/0921-5093(89)90392-410.1016/0921-5093(89)90392-4 ↗
33. 10.1016/0956-716X(90)90418-G10.1016/0956-716X(90)90418-G ↗
34. 10.1179/mst.1992.8.6.50010.1179/mst.1992.8.6.500 ↗
35. 10.1016/0956-7151(90)90118-Z10.1016/0956-7151(90)90118-Z ↗
36. 10.1179/mst.1992.8.2.18410.1179/mst.1992.8.2.184 ↗
37. L. J. BROUTMAN and R.H. KROCH: in 'Composite materials', Vol. 1, 'Interfaces in metal matrix composites', (ed. A. G. Metcalfe), 57–64; 1974, New York/London, Academic Press.
38. 10.1016/0025-5416(86)90368-X10.1016/0025-5416(86)90368-X ↗
39. M. VEDANI, G. PIATTI, and C. Di GREGORIO: in 'Mechanics and mechanisms of damage in composites and multimaterials', (ed. D. Baptiste, 407–421; 1991, London, Mechanical Engineering Publications.
40. J. W. McCOY and F.E. WAWNER: in Proc. Int. Symp. on 'Advances in cast reinforced metal composites', (ed. S. G. Fishman and A. K. Dhingra), 237–242; 1988, Materials Park, OH, ASM.
41. P. K. ROHATGI, F. M. YARANDI, and Y. LIU: in Proc. Int. Symp. on 'Advances in cast reinforced metal composites', (ed. S. G. Fishman and A. K. Dhingra), 249–255; 1988, Materials Park, OH, ASM.
42. 10.1007/BF0264581910.1007/BF02645819 ↗
43. 10.1007/BF0265644010.1007/BF02656440 ↗
44. D. J. LLOYD: in Proc 12th Riso Int. Symp. 'Metal matrix composites — processing, microstructure and mechanical properties', (ed. N. Hansen et al.), 81–99; 1991, Roskilde, Denmark, Rise; National Laboratory.
45. 10.1016/0956-7151(90)90155-A10.1016/0956-7151(90)90155-A ↗
46. 10.1016/0001-6160(89)90037-010.1016/0001-6160(89)90037-0 ↗
47. 10.1007/BF0266737110.1007/BF02667371 ↗
48. 10.1016/0921-5093(91)90566-610.1016/0921-5093(91)90566-6 ↗
49. 10.1016/0001-6160(89)90039-410.1016/0001-6160(89)90039-4 ↗
50. 10.1016/0921-5093(91)90692-G10.1016/0921-5093(91)90692-G ↗
51. 10.1016/0001-6160(79)90051-810.1016/0001-6160(79)90051-8 ↗
52. 10.1007/BF0267230710.1007/BF02672307 ↗
53. 10.1016/0001-6160(81)90185-110.1016/0001-6160(81)90185-1 ↗
54. QING S. Y. · Mem. Et. Sci. Rev. Metall. · 1983 · 4 · 183
55. 10.1007/BF0267230510.1007/BF02672305 ↗
56. 10.1007/BF0267230610.1007/BF02672306 ↗
57. P. W. BRIDGMAN: 'Studies in large plastic flow and fracture', 1–37; 1952, New York, McGraw-Hill.
58. 10.1016/0956-7151(91)90327-W10.1016/0956-7151(91)90327-W ↗
59. 10.1016/0025-5416(86)90261-210.1016/0025-5416(86)90261-2 ↗
60. S. LI, R. J. ARSENAULT, and P. JENA: in Proc. Int. Symp. On 'Advances in cast reinforced metal composites', (ed. S. G. Fishman and A. K. Dhingra), 33–37; 1988, Materials Park, OH, ASM.