journal article·1986-04

Engineering ceramics – the process problem

N. McN. Alford, J. D. Birchall, K. Kendall

Publisher page

Abstract

The main problem to be solved before advanced engineering ceramics can become industrial reality is that components having reliable and consistent properties cannot be made, and rejection rates can be as high as 95%, in stark contrast to the situation with metals and polymers. This results from the small size of defect sufficient to cause failure in a ceramic and the variability in the population density of such defects. It is unlikely that sufficiently sensitive non-destructive testing and diagnostic techniques will become available, and so success will depend on the development of intrinsically reliable process technology. The nature and origin of defects in ceramics are discussed and related to raw material characteristics and process technology. The changes that are needed in raw materials and processes are outlined, and the various approaches to intrinsically reliable techniques (such as the colloidal processing of submicrometre powders, sol–gel methods, etc.) are critically assessed in the light of the need for industrially realistic processes. An attempt is made to assess likely future developments such as ceramic fibre reinforced ceramics.MST/409
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. B G. · Am. Ceram. Soc. Bull., · 1983 · 62 · 590
2. 10.1038/258703a010.1038/258703a0 ↗
3. E. M. LENOE: in ‘Ceramics for high performance materials’, (ed. J. J. Burke et al.), 123; 1974, Brook Hill, USA.
4. GRIFFITH A. A. · Philos. Trans. R. Soc., · 1920 · 221 · 16310.1098/rsta.1921.0006 ↗
5. LANGON T. G. · J. Met · 1980 · 8 · 12
6. 10.1557/PROC-32-18710.1557/PROC-32-187 ↗
7. 10.1111/j.1151-2916.1981.tb09552.x10.1111/j.1151-2916.1981.tb09552.x ↗
8. 10.1016/0272-8842(82)90014-110.1016/0272-8842(82)90014-1 ↗
9. WOODHEAD J. L. · Chem. Br., · 1984 · 20 · 310
10. J. D. BIRCHALL: ‘Handbook of composites’, Vol. 1, (ed. W. Watt and B. V. Perov), 115-154; 1985, Amsterdam, Elsevier.
11. H. DI · Angewandte Chem., · 1971 · 12 · 428
12. 10.1002/9780470291092.ch610.1002/9780470291092.ch6 ↗
13. 10.1111/j.1151-2916.1984.tb19601.x10.1111/j.1151-2916.1984.tb19601.x ↗
14. POPPER P. · Isostatic pressing'; 1976, London, Heyden Press
15. R. J. MACKINNON and J. B. BLUM: ‘Forming of ceramics’, Vol. 9, ‘Advances in ceramics’, (ed. J. A. Mangels), 150-157; 1984, Columbus, Ohio, American Ceramic Society.
16. J. C. WILLIAMS: ‘Ceramic fabrication processes’, (ed. F. Y. Wang), 173-198; 1976, New York, Academic Press.10.1016/B978-0-12-341809-8.50016-4 ↗
17. 10.1002/9780470291085.ch110.1002/9780470291085.ch1 ↗
18. JOHNSSON A. · ‘Forming of ceramics’ · 1984 · 241
19. W. D. KINGERY and B. FRANCOIS: ‘Sintering and related phenomena’, (ed. G. C. Kuczynski et al.), 471-496; 1966, London, Gordon and Breach.
20. 10.1111/j.1151-2916.1983.tb10068.x10.1111/j.1151-2916.1983.tb10068.x ↗
21. 10.1016/0025-5416(81)90066-510.1016/0025-5416(81)90066-5 ↗
22. 10.1038/physci238028a010.1038/physci238028a0 ↗
23. HAGGERTY J. S. · 1985
24. GARVIE R. C. · Soc. · 1972 · 55 · 152
25. 10.1038/258703a010.1038/258703a0 ↗
26. 10.1557/JMR.1986.012010.1557/JMR.1986.0120 ↗
27. M. S. NEWKIRK, A. N. URQUHART, H. R. ZWIKKER, and E. BREVAL: 1986, Boston, Mass. to be published.
28. 10.1038/261683a010.1038/261683a0 ↗
29. 10.1038/264238a010.1038/264238a0 ↗
30. BIRCHALL J. D. · Br. Ceram. Trans. J., · 1984 · 83 · 158