journal article·1993-10

Processing map for hot working of stainless steel type AISI 316L

S. Venugopal, S. L. Mannan, Y. V. R. K. Prasad

Materials Science and Technology· Volume 9· Issue 10
Publisher page

Abstract

Processing and instability maps using a dynamic materials model have been developed for stainless steel type AISI 316L in the temperature range 600–1250°C and strain rate range 0·001–100 s−l with a view to optimising its hot workability. Stainless steel type AISI 316L undergoes dynamic recrystallisation, with a peak efficiency of 35% at 1250°C and 0·05 s−1, which are the optimum parameters for hot working this material. The material undergoes dynamic recovery at 900°C and 0·001 s−1. The increase in the dynamic recrystallisation and dynamic recovery temperatures in comparison with stainless steel type AISI 304L is attributed to the presence of a backstress caused by the molybdenum additions. These results are in general agreement with those reported elsewhere on stainless steel type 316 deformed in hot extrusion and hot torsion. At temperatures <850°C and strain rates >10 s −1, the material exhibits flow localisation owing to adiabatic shear band formation, whereas at higher temperatures (>850°C) and strain rates (>10 s−1) mechanical twinning and wavy slip bands are observed.MST/1769
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. U. SVENSSON: in ‘The hot deformation of austenite’, 499; 1977, New York, AMIE.
2. TOWLE D. J. · Met. Sci., · 1979 · 13 · 246
3. S. R. KEOWN: ‘Hot working and forming processes’, (ed. C. M. Sellars and J. D. Davies), 140-147; 1980, London, The Metals Society.
4. AHLBLOM B. · /rit. Met. Rev., · 1982 · 27 · I
5. 10.1179/03071697680339216910.1179/030716976803392169 ↗
6. 10.1179/03071698080328679310.1179/030716980803286793 ↗
7. 10.1007/BF0266236410.1007/BF02662364 ↗
8. RYAN N. D. · J. Mater. Process Technol., 1990, 21, 177 and High Temp. Technol. · 1990 · 8 · 185
9. 10.1007/BF0266490210.1007/BF02664902 ↗
10. H. L. GEGEL, J. C. MALAS, S. M. DORAIVELU, and V. A. SHENDE: ‘Metals Handbook’, Vol. 14,417; 1987, Metals Park, OH, ASM.
11. J. M. ALEXANDER: in ‘Modeling of hot deformation of steels’, (ed. J. G. Lenard), 101; 1984, Berlin, Springer-Verlag.
12. PRASAD Y. V. R. K. · Indian J. Technol., · 1990 · 28 · 435
13. 10.1179/03071697480328761810.1179/030716974803287618 ↗
14. 10.1007/BF0264349010.1007/BF02643490 ↗
15. 10.1007/BF0264612810.1007/BF02646128 ↗
16. 10.1007/BF0274461810.1007/BF02744618 ↗
17. 10.1007/BF0264192710.1007/BF02641927 ↗
18. VENUGOPAL S. · J. Mater. Process. Technol., · 1989 · 19 · 151
19. 10.1016/0924-0136(92)90349-W10.1016/0924-0136(92)90349-W ↗