journal article·1987-09

Low-cycle-fatigue behaviour of superalloy blade materials at elevated temperature

W. J. Plumbridge, E. G. Ellison

Publisher page

Abstract

The low-cycle-fatigue (LCF) behaviour of superalloys has been examined with particular emphasis on their early stage strength changes and their response to complex cycling. Using steels and a titanium alloy as comparators, it has been possible to establish some general guidelines regarding their LCF performance. In the normal testing domain (700–1000°C) a high yield strain results in predominantly elastic conditions and cyclic stability. Under strain controlled dwell testing superalloys are fatigue dominated and generally more sensitive to compressive hold periods, whereas under stress control shortest lifetimes result from tensile dwells. Environmental influences are strong especially at temperatures where oxides remain brittle, but at high temperatures (>900°C) overaging effects may be beneficial. During thermal–mechanical cycling in-phase testing appears most deleterious. MST/516
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Rocket and propulsion systems research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. LEESE G. E. and BILL R. G.: Proc. AGARD Conf. No. 393 on ‘Damage tolerance concepts for critical engine components’ San Antonio Tex. Apr. 1985 AGARD Paper 15.
2. WELLS C. H., and SULLIVAN c. P.: STP 459, ‘Fatigue at high temperature’, (ed. Coffin L. F.), 59; 1969, Philadelphia, Pa, The American Society for Testing and Materials.
3. MARCHIONNI M. RANUCCI D. and PICCO E.: ‘High temperature alloys for gas turbines’ (ed. R. Brunetaud et al.) 791; 1982 Dordrecht Reidel.10.1007/978-94-009-7907-9_40 ↗
4. 10.1016/0025-5416(81)90040-910.1016/0025-5416(81)90040-9 ↗
5. ELLISON E. G., , PLUMBRIDGE W. J., , and DEAN M. S.: ‘Turbine blade material behaviour and life prediction’, Report No. 84/12, Department of Mechanical Engineering, University of Bristol, 1984.
6. de ABREU E. and ANTUNES V. T.: PhD thesis Cranfield Institute of Technology 1979.
7. 10.1243/PIME_PROC_1976_190_034_0210.1243/PIME_PROC_1976_190_034_02 ↗
8. 10.1111/j.1460-2695.1980.tb01112.x10.1111/j.1460-2695.1980.tb01112.x ↗
9. 10.1016/0142-1123(86)90023-X10.1016/0142-1123(86)90023-X ↗
10. RAO K. B. S. SCHIFFERS H. and SCHUSTER H.: Proc. Int. Conf. on ‘High temperature alloys: their exploitable potential’ Petten Oct. 1985 Bond voor Materialenkennis.
11. 10.1016/0025-5416(83)90144-110.1016/0025-5416(83)90144-1 ↗
12. 10.1115/1.322567510.1115/1.3225675 ↗
13. 10.1007/BF0266619110.1007/BF02666191 ↗
14. HYZAK J. M. and BERNSTEIN H. L.: Proc. AGARD Conf. CP 243 on ‘Characterisation of low-cycle high-temperature fatigue by the strain v. range partitioning method’ Aalborg Apr. 1978 AGARD Paper 11 p. 1.
15. 10.1007/BF0281496210.1007/BF02814962 ↗
16. PLUMBRIDGE W. J. PRIEST R. H. and ELLISON E. G.: ‘Mechanical behaviour of materials’ (eds K. J. Miller and R. F. Smith) Vol. 2 129; 1979 Oxford Pergamon.10.1016/B978-1-4832-8414-9.50038-9 ↗
17. 10.1111/j.1460-2695.1982.tb01228.x10.1111/j.1460-2695.1982.tb01228.x ↗
18. OSTERGREN W. J.: in ‘Creep—fatigue interaction’ (ed. Curran R. M.) 179; 1976 New York American Society for Mechanical Engineers.
19. slim C. I. ‘High-temperature low-cycle fatigue mechanisms for a nickel-base and copper-base alloy’ Report NASA-CR 3543 Lewis Research Center Cleveland Ohio 1982.
20. MILLIGAN W. W. and Btu R. C.: ‘Low-cycle-fatigue behaviour of conventionally cast MAR-M200 at 1000°C’ Report NASA TM-83769 Lewis Research Center Cleveland Ohio 1984.
21. 10.1016/0025-5416(81)90128-210.1016/0025-5416(81)90128-2 ↗
22. PLUMBRIDGE W. J. and STANLEY M.: in Proc. Int. Conf. on ‘Fatigue of engineering materials and structures’ Sheffield 1986 Institute of Mechanical Engineers 377-386.
23. BERNSTEIN H. L.: STP 770, ‘Low cycle fatigue and life predictions’, (ed. C. Amzallag et al.), 105; 1982, Philadelphia, Pa., The American Society for Testing and Materials.
24. SANDOR B. I.: ‘Fundamentals of cyclic stress and strain’ 106; 1972 University of Wisconsin Press.
25. 10.1179/03063457979043413210.1179/030634579790434132 ↗
26. 10.1007/BF0303787710.1007/BF03037877 ↗
27. 10.1007/BF0281173010.1007/BF02811730 ↗
28. 10.1016/0025-5416(81)90040-910.1016/0025-5416(81)90040-9 ↗
29. REUCIIET J., and REMY L.: Metall. Trans., 1983, 14A, 1441.
30. 10.1007/BF0264256110.1007/BF02642561 ↗
31. 10.1016/0142-1123(84)90019-710.1016/0142-1123(84)90019-7 ↗
32. 10.1016/0025-5416(82)90136-710.1016/0025-5416(82)90136-7 ↗
33. NAZMY M. Y.: Scripta Metall. 1982 16 1329.10.1016/0036-9748(82)90421-5 ↗
34. MANSON S. S. HALFORD G. R. and OLDRIEVE R. E.: ‘Relation of cyclic loading pattern to microstructural fracture in creep-fatigue’ Report NASA-TM 83473 Lewis Research Center Cleveland Ohio 1984.
35. 10.1016/0022-3115(76)90015-510.1016/0022-3115(76)90015-5 ↗
36. 10.1016/0142-1123(85)90024-610.1016/0142-1123(85)90024-6 ↗
37. SAMLELSSON A., , LARSSON L. E., , and LUNDBERG L.: Final Report, COST 50, Project 52, 1981, Round II.
38. HUFF H. and KONIG G. W.: Proc. AGARD Conf. No. 393 on ‘Damage tolerance concepts for critical engine components’ San Antonio Tex. Apr. 1985 AGARD Paper 19.
39. MARCHAND N., and PELLOUX R. M.: Thermal-mechanical fatigue crack growth in Inconel X750’, Report NASA CR-174740, MIT, 1984.
40. RAU C. A., , GEMMA A. E., , and LEVERANT G. R.: STP 520, ‘Fatigue at elevated temperatures, (ed. Carden A. E. et al.), 166; 1973, Philadelphia, Pa, The American Society for Testing and Materials.