Crack opening displacements during fatigue crack growth in Ti–SiC fibre metal matrix composites by X-ray tomography
Source abstract
Abstract
High spatial resolution X-ray microtomography has been used to map the variation of crack opening displacement (COD) across matrix cracks in unidirectional Ti–6Al–4V/SCS-6 SiC fibre composites. These show the crack front to bow out between fibres as the crack emerges from a ply and to advance preferentially towards the fibres when located between plies. Quantitative image analysis of 3D volume reconstructions has enabled the COD to be measured at Kmin, Kmid and Kmax. Hysteresis in crack opening was observed during the fatigue cycle (loads applied statically). Very little variation in COD has been observed parallel to the crack front irrespective of proximity to the bridging fibres. The changes in COD relative to the initial residual opening at Kmin are not inconsistent with being proportional to the square root of the distance from the crack tip. Considerable crack blunting was observed during an overload leading to a significant residual crack opening upon unloading.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. 10.1179/02670830010150841410.1179/026708300101508414 ↗
2. Harris B. ‘Engineering composite materials’, 2nd edn; 1999, London, Institute of Metals.
3. 10.1007/BF0055001910.1007/BF00550019 ↗
4. 10.1007/BF0267556410.1007/BF02675564 ↗
5. 10.1016/0956-7151(94)90208-910.1016/0956-7151(94)90208-9 ↗
6. 10.1016/S1359-6454(97)00179-110.1016/S1359-6454(97)00179-1 ↗
7. 10.1016/0167-6636(90)90037-G10.1016/0167-6636(90)90037-G ↗
8. 10.1016/0956-7151(93)90008-G10.1016/0956-7151(93)90008-G ↗
9. McCartney L. · Proc. Roy. Soc. Lond. A · 1987 · 409 · 32910.1098/rspa.1987.0019 ↗
10. 10.1016/0001-6160(85)90124-510.1016/0001-6160(85)90124-5 ↗
11. 10.1016/0956-7151(92)90092-S10.1016/0956-7151(92)90092-S ↗
12. 10.1016/S1359-6454(97)00146-810.1016/S1359-6454(97)00146-8 ↗
13. 10.1016/S0921-5093(00)01934-110.1016/S0921-5093(00)01934-1 ↗
14. 10.1179/174328005X1437510.1179/174328005X14375 ↗
15. 10.1016/j.actamat.2003.11.02410.1016/j.actamat.2003.11.024 ↗
16. 10.1016/S1359-6462(98)00463-110.1016/S1359-6462(98)00463-1 ↗
17. 10.1023/A:100749533189010.1023/A:1007495331890 ↗
18. 10.1007/s11661-003-0139-410.1007/s11661-003-0139-4 ↗
19. 10.1023/B:FRAC.0000022283.54186.6510.1023/B:FRAC.0000022283.54186.65 ↗
20. Larsen J. M., Jira J. R., John R., and Ashbaugh N. E.: in ‘Life prediction methodology for titanium matrix composites’, (ed.Johnson W. S. et al), ASTM STP 1253, 114-136; 1996, Philadelphia, PA, ASTM.10.1520/STP18221S ↗
21. John R., Jira J. R., and Larsen J. M.: in ‘Composite materials: fatigue and fracture’, (ed.Bucinell R. B.), ASTM STP 1330, 122-144; 1998, Philadelphia, PA, ASTM.
22. Breunig T. M., Stock S. R., Antolovich S. D., Kinney J. H., Massey W. N., and Nichols M. C.: Proc. 22nd Int. Fracture Mechanics Symp. (ed.Ernst H. A. et al), ASTM STP1131, 209-214; 1992, Philadelphia, PA, ASTM.
23. 10.1016/S1359-6454(96)00311-410.1016/S1359-6454(96)00311-4 ↗
24. 10.1046/j.1365-2818.2003.01105.x10.1046/j.1365-2818.2003.01105.x ↗
25. 10.1016/0022-5096(87)90006-810.1016/0022-5096(87)90006-8 ↗