Spallation of oxide from stainless steel AGR nuclear fuel cladding: mechanisms and consequences
Source abstract
Abstract
20Cr–25Ni–Nb stabilised stainless steel is used in the advanced gas cooled reactors (AGR) as cladding for the UO2 fuel. Extensive studies have been made and are continuing in an attempt to understand the spallation of surface oxide from this steel and in this paper recent progress is surveyed. In particular, it is shown how the decohesion of oxide can be thought to occur when the strain energy in the oxide layer, resulting from differential thermal contraction during cooling, attains a critical value. This value can be equated to the fracture energy of the oxide/metal interface. With continued cooling, the quantity of spall increases as an increasing fraction of the surface oxide reaches the fracture condition. The intrinsic distribution in the oxide strain energy required to cause the observed spallation kinetics is derived. The paper is concluded with a consideration of the consequences of such spallation. First, the release of radioactive particles of oxide into the primary circuit can cause contamination of out-of-core structures and limit man ingress. Second, the exposure of the chromium depleted steel substrate by spallation of its protective oxide will lead to the development of a pit. The healing of such pits is also discussed.MST/859
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Nuclear reactor physics and engineering · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. FRANCIS J. M. · J. Iron Steel Inst. · 1965 · 203 · 468
2. 10.1016/S0010-938X(70)80061-010.1016/S0010-938X(70)80061-0 ↗
3. 10.1007/BF0060380510.1007/BF00603805 ↗
4. 10.1016/0022-3115(81)90558-410.1016/0022-3115(81)90558-4 ↗
5. 10.1007/BF0061215710.1007/BF00612157 ↗
6. 10.1007/BF0061208810.1007/BF00612088 ↗
7. 10.1007/BF0065622510.1007/BF00656225 ↗
8. ATKINSON H. V. · Nucl. Energy (Br. Nucl. Energy Soc · 1986 · 25 · 149
9. 10.1007/BF0065658010.1007/BF00656580 ↗
10. 10.1016/0010-938X(82)90073-710.1016/0010-938X(82)90073-7 ↗
11. U. R. EVANS: ‘An introduction to metallic corrosion’, 194; 1948, London, Edward Arnold.
12. M. I. MANNING and E. METCALFE: ‘Sixth European congress on metallic corrosion’, 121; 1977, London, Society of Chemical Industry.
13. ARMITT J. · 1978
14. 10.1016/0010-938X(84)90051-910.1016/0010-938X(84)90051-9 ↗
15. H. E. EVANS and R. C. LOBB: ‘Ninth international congress on metallic corrosion’; 1984, Ottawa, NRC.
16. 10.1179/03063458279042717210.1179/030634582790427172 ↗
17. C. H. WELLS, P. S. FOLLANSBEE, and R. R. DILS: ‘Stress effects and the oxidation of metals’, (ed. J. V. Cathcart), 220; 1975, New York, AIME.
18. 10.1016/0020-7683(84)90012-X10.1016/0020-7683(84)90012-X ↗
19. 10.1016/0040-6031(84)87287-110.1016/0040-6031(84)87287-1 ↗
20. EVANS H. E. · Dechema · 1987 · Frankfurt
21. 10.1007/BF0060456610.1007/BF00604566 ↗
22. L. M. C. DUTTON: ‘Radiation protection in nuclear power plants and the fuel cycle’, Vol. 1, 113-124; 1978, London, British Nuclear Energy Society.
23. R. E. DAVIS and A. E. SOUCH: ‘Radiation protection in nuclear power plants and the fuel cycle’, Vol. 1, 81-89; 1978, London, British Nuclear Energy Society.
24. P. W. G. SIMPSON and H. E. EVANS: ‘Nuclear fuel performance’, 265-272; 1985, London, British Nuclear Energy Society.
25. 10.1016/0010-938X(84)90052-010.1016/0010-938X(84)90052-0 ↗
26. R. C. LOBB and H. E. EVANS: ‘Plant corrosion: prediction of materials performance’, (ed. J. E. Stritt and J. R. Nicholls), Chap. 15, 272-285; 1987, Chichester, Ellis Horwood.