Influence of heat treatments on microstructure of austempered ductile iron
Source abstract
Abstract
The influence of temperature and time of austempering on a nodular cast iron austenitised for 30 min at 900°C has been investigated using optical and transmission electron microscopy. The carbon content of the austenite has been evaluated by measuring the lattice parameter via X -ray diffraction. The structure consisted of bainite containing retained austenite, the amount of which increased, and the carbon content of which decreased, with increasing austempering temperature. No carbides were detected in the materials austempered at 300 and 370°C for up to 2 h, which contained only bainite and austenite. After austempering at 410°C and cooling to room temperature a certain amount of martensite was always detected. After long times at this temperature the austenite decomposed to ferrite and complex carbides. Martensite formation seems to be promoted by the decrease in the carbon content of austenite due to the precipitation of ɛ carbide homogeneously within it. During long austempering treatments at 410°C complex carbides are formed, probably from the ɛ carbides precipitated in the austenite.MST/1926
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. H. K. D. H. BHADESHIA: ‘Bainite in steels', 61–87; 1992, London, The Institute of Metals.
2. 10.1007/BF0264686810.1007/BF02646868 ↗
3. 10.1007/BF0264239110.1007/BF02642391 ↗
4. 10.1007/BF0264239210.1007/BF02642392 ↗
5. 10.1007/BF0264194210.1007/BF02641942 ↗
6. 10.1007/BF0265830910.1007/BF02658309 ↗
7. W. J. DUBENSKY and K.R. RUNDMAN: in Proc. Conf. 'Trans-actions of the American Foundrymen's Society', Vol. 93, 389–394; 1985, Des Plaines, IL, American Foundrymen's Society.
8. 10.1016/0026-0800(87)90062-010.1016/0026-0800(87)90062-0 ↗
9. 10.1016/0025-5416(87)90556-810.1016/0025-5416(87)90556-8 ↗
10. 10.1179/mst.1992.8.3.26310.1179/mst.1992.8.3.263 ↗
11. MILLER R. L. · Trans. ASM · 1964 · 57 · 892
12. B. D. cuurrv: 'Elements of X-ray diffraction', 350–368; 1978, Reading, MA, Addison-Wesley.
13. T. N. ROUNS and K.B. RUNDMAN: in Proc. Conf. 'Trans-actions of the American Foundrymen's Society', Vol. 95, 851–874; 1987, Des Plaines, IL, American Foundrymen's Society.
14. 10.1007/BF0139734610.1007/BF01397346 ↗
15. NISHIYAMA Z. · Sci. Per. Tokohu Univ. · 1934 · 23 · 325
16. BAIN E. C. · Trans. AIME · 1924 · 70 · 25
17. KELLY P. M. · Trans. AIME · 1965 · 233 · 264
18. GUTIERREZ I. · Metall. Trans
19. JACK K. H. · J. Iron Steel Inst. · 1951 · 169 · 26
20. 10.1007/BF0283312510.1007/BF02833125 ↗
21. W. J. DUBENSKY and K.B. RUNDMAN: in Proc. Conf. 'Trans-actions of the American Foundrymen's Society', Vol. 93, 705–718; 1985, Des Plaines, IL, American Foundrymen's Society.
22. 10.1007/BF0283317510.1007/BF02833175 ↗
23. KEOWN S. R. · J. Iron Steel Inst. · 1966 · 204 · 832
24. 10.1007/BF0267725910.1007/BF02677259 ↗
25. 10.1179/mst.1987.3.6.42210.1179/mst.1987.3.6.422 ↗
26. 10.1179/mst.1992.8.12.109510.1179/mst.1992.8.12.1095 ↗
27. G. KRAUSS: in 'Principles of heat treating of steel', 54; 1980, Metals Park, OH, ASM.
28. ANDREWS K. W. · J. Iron Steel Inst. · 1965 · 203 · 721
29. MATAS S. J. · Trans. Met. Soc. AIME · 1961 · 221 · 179
30. 10.1179/03071698180327599210.1179/030716981803275992 ↗
31. 10.1007/BF0267016810.1007/BF02670168 ↗
32. MURPHY S. · Metall. Trans. · 1970 · 1 · 84310.1007/BF02811763 ↗
33. 10.1016/0001-6160(64)90009-410.1016/0001-6160(64)90009-4 ↗
34. Z. NISHIYAMA: in ‘Martensitic transformation', 467; 1978, New York, Academic Press.
35. 10.2320/matertrans1960.17.5910.2320/matertrans1960.17.59 ↗
36. 10.1007/BF0267016610.1007/BF02670166 ↗
37. 10.1007/BF0264771610.1007/BF02647716 ↗